Release Notes/Solved items Version 2022.1

RadiMation version 2022.1.4

• #12066: Driver: Keysight Fieldfox N9916B
• #12691: Antenna scan add Attenuation in table
• #12732: Correlated graph is not shown in Multiband GTEM measurement
• #12796: Scan resolution for Rigol RSA5065
• #12803: Error during uniform field calculation
• #12809: Initialisation of the devices (especially the Rigol RSA5065) takes a long time (approx. 13s).
• #12835: Use advanced option "Reduce.Buckets.Minimum" to create a fixed suggested index trace to increase the resolution of the shown graph data
• #12839: Keysight E5061B SA (Port 2) + HP1141 100x: Device Driver Function Not Implemented.
• #12853: NSG3040A Surge generator connection problem
• #12855: Device driver not implemented?
• #12889: Driver: Bonn BLWA 0860-160/100/50D.
• #12900: Scaling of CE Multiband is not using the full screen.
• #12903: Fluke 8840, is being measured too fast, which result in a worse accuracy
• #12904: GTEM correlation differences
• #12905: Correction file raises warning that the frequency is too high.
• #12907: CISPR CAV detector does not turn on
• #12908: Probe Connetion.
• #12916: Switching ports from 1/2 to T/R is setting the end frequency in override mode
• #12919: 'Continuous Measure' button remains to show 'Stopping continuous measure'

RadiMation version 2022.1.3

• #9088: USB communication with RadiCentre is disturbed by Lumiloop TCP Server
• #11501: Driver: R&S RTE1024 as powermeter
• #12020: Signal Generator Rohde&Schwarz SMCV100B
• #12131: Update Raditeq dongle in chapter 2 of the manual
• #12403: TSF RI limit line control, title of form is not shown, there is no OK button
• #12538: BAND selection for driver of IFI T82-250.
• #12557: Issues when starting tests using the EM-Test NX7
• #12669: Multiband of Absorbing clamp can not move to 6m.
• #12685: Primary GPIB address of 31 can be selected, while the maximum allowed primary GPIB address is 30
• #12688: Driver: Yokogawa DL750
• #12689: frmConfigTestLevelElectricalField uses wrong language resource id for the side button
• #12698: LISN Network implementation
• #12702: Stopping sequence
• #12705: Configurable Antenna Tower - Commands for height missing
• #12706: CISPR AV esw 8 time domain mode.
• #12707: Report Generator does not run correct for EFT tests
• #12714: Maturo FCU 3.0. Device driver not implemented
• #12718: MIL-STD Peak discrimination is always NB when a RBW above 100 kHz is used
• #12723: Start and stop frequency has changed during (de-)activation of the preamplifier
• #12725: Test not closed.
• #12729: Tektronix AFG3251C: Modulation frequency is not correctly set
• #12733: Data out of range
• #12734: Conducted Emission, data out of range
• #12744: Driver: Lumiloop 2.0+
• #12748: Frankonia AXL-200 raises error that device driver is unknown
• #12750: Schloder CDG6000 powermeter device driver shows wxWidgets debug window
• #12756: Initialisation of RadiSwitch takes a very long time when a Lumiloop is also connected
• #12757: Initialisation of RadiPos takes a very long time when a Lumiloop is also connected
• #12764: Extend the lumiloop LSProbe 2.0 driver to allow calibration of all 6 individual axis
• #12802: Ending a test without saving

RadiMation version 2022.1.2

• #5196: Allow to measure multiple detectors simultaneously during continuous measure
• #7849: Ability to save invalid TSF files and LLF files
• #11321: TSF file of Burst/Surge test cannot be saved when no cable is selected yet
• #11631: TSF cannot be saved if no protection key is present
• #11861: ErrorReport: "*.TSF file change without dongle not possible!"
• #11891: report generator text editor should not include RAW OADateTime values when generating reports
• #12151: Possibility to save an incomplete configured TSF file to disk
• #12158: RadiMation force closes when the process cannot acces the RadiLog file, because it is in use by another process.
• #12231: Driver: AFJ FFT3110.
• #12263: VI instrument window graph control are moved of the visible area when resizing the form
• #12321: Application note for close proximity magnetic field testing
• #12359: Save *.TSF file without dongle not possible!
• #12399: Error @ Restart last TSF
• #12402: Limit lines are not shown when applying filter settings
• #12404: Clean up invoke related code implemented on the RadiMation mainWindow
• #12406: Add notification bar too the MB field probe test level, stating that multiple probes will be averaged
• #12412: Device driver related UI components are not functioning as intented
• #12446: SpinUpDownControl shows white text on white background.
• #12464: Extend AD-Convertor driver for Tektronix TDS2000 series to allow USB connection.
• #12536: Dark skin white border at Note and Address information.
• #12539: issue 2022-03-30 AL1: frequency graph switch from log to lin after switching to Angle view.
• #12544: Sequence overview menu item stays active when cancelled.
• #12545: Connection problem
• #12553: TDEMI: Support multiple final detectors in parallel
• #12554: Ethernet Driver required for Agilent 33220A.
• #12576: Error final peak measurement R&S ESPI3 with RadiMation 2021.3.5
• #12588: When resizing the Pulse modulation configuration, the "Apply out of dwell time" is moved under the pulse gating frame
• #12601: Export of limitlines is showing a stepped instead of constant slope.
• #12603: No export was possible of measurement T21 due to out of memory.
• #12167: Validate LLF files at the start of test
• #12622: Start and stop frequency on UFA calculation printout are always zero
• #12623: Opening a unfinished PI data document will start a test without warning
• #12627: The maximum frequency is 10 GHz in the 'Free' and 'Essential' license types
• #12628: Control of an EUT controller is not allowed in the 'Essential' license type
• #12629: Control of a positioner is not allowed in the 'Essential' license type
• #12630: Change references to RadiMation Lite license to RadiMation Essential
• #12636: The about window shows that the RadiMation 'Pro' license is used
• #12637: Timeout while data transfer.
• #12641: CI calibration error.
• #12656: Logarithmic step frequency, starting from shows: -10000000000000 MHz
• #12661: Driver: RadiSwitch RSW1022V and RSW1024V.
• #12662: AM square wave modulation on Keysight N5171B generator.
• #12672: unable to split cells during template generation.
• #12700: Trial period of RadiMation Pro-error with start of test
• #12747: RS10 probe connect niet
• #12578: Antennerotator rotates to -3.8 degrees instead of 356.2 degrees
• #12762: How to change the Default Setting of Receiver Setting in the Software
• #12817: GPIB error: Hibernated NI drivers error. Restart your PC
• #4668: Allow to measure multiple detectors simultaneously during final measurement

RadiMation version 2022.1.1

• #9256: Update the SX32W to the latest version released by Safenet.
• #12125: The border of the non-maximized MDI child window is very narrow. Please enlarge it.
• #12126: Show the title bar of a passive MDI child window in a different colour than the active MDI child window
• #12127: Allow that end-user can select another skin.
• #12245: If only a single fieldprobe is measured, it will be used as the average field, even if it is not selected to be included in the average calculation
• #12278: RadiLog shows key-value pairs on the General tab instead of on the Input or Output tab
• #12282: Automatically focus the sequence overview window when the last test of the sequence is finished
• #12283: Option to select if the sequence window should remain open or close automatically.
• #12337: Copy the RadiPower USB drivers from DRIVERS.EXE to a sub-directory to allow manual driver installation.
• #12362: incorrect status info sequence.
• #12392: Skin is not applied correctly when switchen from the windows default to another skin.
• #12417: error while applying new skin.
• #12441: The corners of the buttons on the VI windows have white pixels in a dark skin.
• #12442: Unexpected borders are shown around buttons on some skins.
• #12444: Forms having a fixed light colour even using darker skins
• #12529: Driver: SCHAFFNER EMI Receiver SCR 3502 (RS232).
• #12534: AW: Export from Version 2021.3.5 => Out of Memory.
• #12628: Control of an EUT controller is not allowed in the 'Essential' license type
• #12629: Control of a positioner is not allowed in the 'Essential' license type
• #12631: The main window title bar includes 'RadiMation Essential' when the Essential license is used
• #12643: Voltage dips test
• #12663: Rohde & Schwarz BBA150 connection error