Release Notes/Solved items Version 2019.1.1

RadiMation version 2019.1.1[edit]

#1924: Zooming in the graph is not possible in compression test
#4370: TSF file is duplicated
#4670: Building the 'TestSites' menu can take a long time
#4777: Printing the angle plot of a Multiband emission test is printing the frequency graph
#5754: Graph of UFA calculation starts at -1, but should start at 0
#6529: Version numbers in the Device driver DLL's should use the build number that is used, also if adjusted to the SVN revision
#8613: If auto-save is active, data of measurement should be saved to disk when automatic mode is left
#7793: Compression Gain System Calibration representation of graph is vague
#7794: Compression Gain System Calibration when saved it removes rest of suggested name discription after any.
#7795: Compression Gain Test default value of added compression point is invalid
#7869: Y axis scaling in graph improvements
#8021: When a Band has been selected the TSF is marked as being changed
#8024: Magnifier in directory configuration is opening wrong folder or not opening the folder, but after multiple clicks it is opening the selection window
#8148: Modification to Monitoring input channel sometimes reset the configured channel to 1
#8149: Graph Customization Configuration of the global graph color settings outside a test is not updating the global settings
#8158: Multiband Emission TSF configuration is not using the maximum number of selectable detectors
#8220: Graph customization is not applied when a test is opened
#8265: Confirmation message is default selecting wrong answer (No) instead of Yes
#8268: Graph Customization is not updated
#8272: General Information in a calibration file cannot be shown if the calibration file is readonly
#8277: Disconnecting one VI of four connected RadiCentre devices is raising errors
#8283: A 'Copy to Clipboard' action is marking a COR file as being changed
#8290: System Calibration Attenuation / Gain Message shows message to connect the sensor power, but requires a forward powermeter in test equipment
#8318: Impossible to remove graph line from different test data when the file has been closed
#8319: Multiband shows an unexpected frequency graph line and table information which can't be removed
#8374: Multiple PC's running the same confdvdr location gives error
#8380: Selecting a field probe in a testsite takes more than 20 seconds
#8546: Index was out of range. Must be non-negative and less than the size of the collection.
#8554: Ability to show polar plot of field strength in Multiband Immunity test
#8563: Not possible to select 1 point per row in UFA calculation
#8564: ErrorReport: "Index was outside the bounds of the array.
#8587: Changing graph customizations is not setting the changed state of the test
#8733: Adding a multiline note field in the general information items of the eut is not possible
#8757: Not possible to edit MB EFT test from the sequence window
#8812: Wrong lines are drawn in the Multiband Immunity graph, when the same frequencies are tested often
#8820: Ability to use Spectrum analyzer for harmonics measurements
#8864: Graphs of gain compression calibration are not showing all the data
#8866: No error is raised when the fieldprobe has a multiply correction file attached with values below 0
#8881: Graphs of amplifier linearity calibration cannot be shown in Watts unit
#8882: Better auto scaling for the y-axis of the amplifier linearity graphs
#8887: RadiMation free Virtual powermeter
#8892: Wrong title Harmonics calibration
#8893: Harmonics test graphs does not use stored graph settings
#8904: Suggested filename for the calibration is not correct if the TSF contains a .
#8918: print graph shows temp document already being used by another process
#8938: Perform antenna scan calibration using a network analyzer instead of signal generator and spectrum analyzer
#8941: ctlEvents.cs is included twice and seems to be duplicated
#8948: Not all calibration tests are listed in the add test function of the sequence.
#8974: Selecting multiple bands with shift is not working as it should be
#9013: Sort the names of the graph as they are shown below the 'Graphs' button
#9025: Table tab does not display its measured values in a correct manor
#9032: Harmonics show -1000dBm
#9062: Measurement of Harmonics with 2 power meters
#9082: RadiMation calibration expire date database error crash
#9105: GetGlobalizedHashCode Object must be of type String
#9125: Pressing update in graph config does not update the image.
#9185: Unclear time logging behaviour Radimation
#9186: Suggested filename of a calibration file is only 'm.cal' if the TSF description is: "80-1000 MHz, 10 V/m"
#9188: Corrupt testfile, no data is visible in the graph
#9218: Infinit loop graph elements being added for gain calibration test
#9219: Cannot find the device driver - (Device is not on - Device driver is installed)
#9232: Emission peak number not correct
#9239: When starting an isotropy measurement the angle tab is not displayed
#9242: Exception is shown when EUT Monitoring input is opened
#9248: Readonly Network Analyzer system calibration still has some fields enabled
#9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized
#9267: Continue button does not work
#9287: Test data disappeared
#9288: PEAK TABLE keyword no longer works.
#9291: Save error report standard suggests .log extension
#9292: When there is no EUT there is no log file in the error report
#9299: Polar graph displays a graph line that has it's visibility tuned off
#9303: ErrorReport: "Radimation crashes suddenly after CE measurement is finished "
#9304: Exception of type 'System.OutOfMemoryException' was thrown.
#9310: Testdata again not visible.
#9311: Test data lost / not visible
#9315: Auto Backup of RadiLog
#9353: Popup menu of available devices has no seperator between the actions and the devices
#9356: Configurable AD Converter value always 0
#9427: Cancel button of Multiband Immunity TSF window is not working anymore
#9429: Destination array was not long enough
#9431: External FM modulation waveform is not saved
#9449: Object reference not set to an instance of an object: clsImpedanceTableCalculation.GetResistanceFromImpedanceTable(
#9452: Burst, graph does not re-scale when the to measure time is < measured time
#9453: Close RadiMation with FieldSensor open and connected gives error
#9454: Object reference error when switching tabs in Configuration window
#9460: Closing Virtual Forward Power Meter window shows error: Power Meter Init count: 1
#9465: Carrier frequency control is not correctly sized on the VI Signal generator window
#9496: Use default graph customization disables controls
#9504: Report Generator: date format wrong
#9507: Input string was not in a correct format.
#9523: Keyword PEAK TABLE does not work in 2018.1.4
#9533: Power Burst graphs are not correctly shown
#9535: Configuring a multiband test has a slow response
#9567: Table is turned after last peak measurement
#9600: Object reference: Invoke RaiseProgressChangedEvent
#9634: Isotropy positioner is not being initialized at first angle at the begin of the test.
#9635: Sudden shutdown without warning.
#9637: The question 'Are you sure you want to close the test' is shown twice.
#9638: Opening a small amplifier linearity test result is taking minutes
#9639: Measure time and step frequency controls are not enabled correctly in RE Multiband when switching testsites
#9657: App. Note 115: How to measuring Amplifier harmonics using RadiMation.
#9687: Multiband EFT is very difficult to close when the automated test is finished
#9694: External Modulation options not always shown
#9714: Deadlocking in clsDataIdentifiers.
#9715: Move during measurement is not shown
#9719: Polar plots don't scale correct.
#9731: New sweep in a Multiband Emission test is not overwriting the previous sweep
#9732: Testdata of a singleband immunity test is not saved at the end of a test
#9734: Index out of bounds when shift clicking on a band.
#9742: Changing a sequence file does not work correctly.

Release Notes/Solved items Version 2019.1.1

RadiMation version 2019.1.1[edit]

Navigation menu

Search