Difference between revisions of "DeviceDriverRadiCentreTab"

From RadiWiki
Jump to: navigation, search
 
Line 12: Line 12:
 
{{ScreenElementDescriptionEnd}}
 
{{ScreenElementDescriptionEnd}}
  
The settings on this {{ScreenElement|RadiCentre}} tab, only specify if and which RadiCentre is used. The communication settings on the {{ScreenElement|Communication}} tab specify the connection settings to communication with the measurement device.  
+
The settings on this {{ScreenElement|RadiCentre}} tab, only specifies if and which RadiCentre is used. The communication settings on the {{ScreenElement|Communication}} tab specify the connection settings to communication with the measurement device.  
  
 
The configuration on the {{ScreenElement|Communication}} tab should be configured depending on the outgoing connection from the PC. Thus if {{ScreenElement|Directly to PC}} is selected, the communication settings should be configured as what is actually used between the PC and the {{PAGENAME}} itself. If {{ScreenElement|RadiCentre 1}} or {{ScreenElement|RadiCentre Multi-slot}} is selected, the communication settings should be configured as what is actually used between the PC and the RadiCentre. In the configuration where a RadiPower is connected with USB to a Multi-slot RadiCentre, which is connected by GPIB to the PC, the communication settings of the RadiPower device driver should thus be GPIB.
 
The configuration on the {{ScreenElement|Communication}} tab should be configured depending on the outgoing connection from the PC. Thus if {{ScreenElement|Directly to PC}} is selected, the communication settings should be configured as what is actually used between the PC and the {{PAGENAME}} itself. If {{ScreenElement|RadiCentre 1}} or {{ScreenElement|RadiCentre Multi-slot}} is selected, the communication settings should be configured as what is actually used between the PC and the RadiCentre. In the configuration where a RadiPower is connected with USB to a Multi-slot RadiCentre, which is connected by GPIB to the PC, the communication settings of the RadiPower device driver should thus be GPIB.

Latest revision as of 10:42, 14 October 2020

DeviceDriverRadiCentreTab.png

There are several methods in which the DeviceDriverRadiCentreTab can be connected to the PC. The DeviceDriverRadiCentreTab can for example be connected directly to the PC, or through a plugincard in a RadiCentre 1 or a multi-slot RadiCentre. More information on how to use the RadiCentre is present in the product manual of the RadiCentre. The settings on the RadiCentre tab can be used to specify how the DeviceDriverRadiCentreTab is connected.

When the DeviceDriverRadiCentreTab is connected to a multi-slot RadiCentre, also the slot number in which the plugincard is fitted, should be specified.


ScreenElementDescription.png Directly to PC Specifies that the DeviceDriverRadiCentreTab is connected directly to the PC, without the use of a RadiCentre.
ScreenElementDescription.png RadiCentre 1 Specifies that the DeviceDriverRadiCentreTab is connected to a plugincard that is fitted in a RadiCentre 1.
ScreenElementDescription.png RadiCentre Multi-slot Specifies that the DeviceDriverRadiCentreTab is connected to a plugincard that is fitted in a multi-slot RadiCentre.
ScreenElementDescription.png Device ID Specifies the slot in the multi-slot RadiCentre in which the plugincard of the DeviceDriverRadiCentreTab is fitted.


The settings on this RadiCentre tab, only specifies if and which RadiCentre is used. The communication settings on the Communication tab specify the connection settings to communication with the measurement device.

The configuration on the Communication tab should be configured depending on the outgoing connection from the PC. Thus if Directly to PC is selected, the communication settings should be configured as what is actually used between the PC and the DeviceDriverRadiCentreTab itself. If RadiCentre 1 or RadiCentre Multi-slot is selected, the communication settings should be configured as what is actually used between the PC and the RadiCentre. In the configuration where a RadiPower is connected with USB to a Multi-slot RadiCentre, which is connected by GPIB to the PC, the communication settings of the RadiPower device driver should thus be GPIB.

If the DeviceDriverRadiCentreTab is for example connected to slot 3 of a multi-slot RadiCentre which has IP address 192.168.178.95 and is connected by LAN to the PC, the following settings should be configured in the device driver of the DeviceDriverRadiCentreTab:

  • RadiCentre tab
    • Connection type: RadiCentre Multi-slot
    • Device ID: 3
  • Communication tab
    • Communication Stream: VISA
    • LAN: 192.168.178.95