Difference between revisions of "LUMILOOP LS Probe 1.2"

From RadiWiki
Jump to: navigation, search
(Initial DeviceDriverInfo page creation)
 
(Installation & Configuration)
 
(5 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
|SupportedDeviceTypes=32
 
|SupportedDeviceTypes=32
 
}}
 
}}
 +
 +
== Installation & Configuration ==
 +
The software delivered with the lumiloop has to be installed, follow the installation instructions in the manual.
 +
 +
After the installation, first start the "LSProbe_TCP_Server", this will show the computer interface number (CI#).
 +
 +
[[Image:LSProbeTCPServerCI.PNG]]
 +
 +
This computer interface number needs to be configured in the RadiMation driver.
 +
 +
[[Image:LSProbe1Settings.png]]
 +
 +
After the configuration the Lumiloop GUI can be started, and the laser can be activated.

Latest revision as of 10:07, 28 June 2022

The LUMILOOP LS Probe 1.2 device driver is a Field Sensor which is supported by RadiMation®.

Links

This information about an equipment is automatically generated from the list of supported device drivers from RadiMation.
If you need more information you can contact radimation-support@raditeq.com.

Installation & Configuration

The software delivered with the lumiloop has to be installed, follow the installation instructions in the manual.

After the installation, first start the "LSProbe_TCP_Server", this will show the computer interface number (CI#).

LSProbeTCPServerCI.PNG

This computer interface number needs to be configured in the RadiMation driver.

LSProbe1Settings.png

After the configuration the Lumiloop GUI can be started, and the laser can be activated.