Release Notes/Solved items Version 2020.2

RadiMation version 2020.2.10

• #11479: Are Limit lines auto-included when exporting graphs using the report generator
• #11500: Driver: LadyBug LB480A
• #11633: Driver: Raditeq RPR3008W.
• #11640: Adjust raditeq IDN queries for raditeq devices
• #11653: Error 10 while controlling the old model of the EM-Test CWS 500

RadiMation version 2020.2.9

• #5282: Strange message for HP 8903A + 8903B (Motorola).
• #10091: Wrong start frequency/StartFrequency changed
• #11483: ErrorReport: "RBW fouten tijdens na meten pieken!!!!"
• #11605: Configurable LISN with manual messages, shows the messages too often
• #11606: Reference level of the Tektronix RSA507A is not correctly set at the begin of the test
• #11607: Attenuator of the Tektronix RSA507A is not correctly set at the begin of the test
• #11608: Change in reference level adjusts the top of the graph in Tektronix SignalVU, reference level itself is not changed
• #11609: Progress calculation of trace retrieval from Tektronix SignalVU stays on 0%
• #11611: R&S ESRP measures first average detector final measurement with different RBW
• #11613: Rigol RSA5065A retrieves trace before sweep is finished
• #11615: ErrorReport: "Wrong data in Peak Table at QP measurement"
• #11616: Boonton 9241 in 4230 emulation mode cannot be controlled by Boonton 4230 driver
• #11620: ErrorReport: "MK Messtechnik Motion detection"
• #11623: AMETEK CTS: Issue 2021-03-01_Angle and Height in Peaktable wrong

RadiMation version 2020.2.8

• #8300: R&S ESPI Scanning Receiver Specific System Error -200 Execution error; Function not available; SCAN1:BAND:RES 120 KHZ
• #9548: R&S ESL 6 Scanning Receiver: Specific System Error: -200,"Execution error; Function not available; BAND 120 KHZ"
• #9552: ErrorReport: "R&S ESL 6 Scanning Receiver: Specific System Error: -200,"Execution error; Function not available; BAND 9 KHZ""
• #9962: R&S ESL 6 Scanning Receiver: Specific System Error: -200,"Execution error;Function not available;BAND 9 KHZ"
• #10292: R&S ESL 6 Scanning Receiver: Specific System Error: -200,"Execution error; Function not available; BAND 120 KHZ"
• #10902: Radilog: Unable to open file, file does not exist
• #10920: Issue 2020-04-09 AL1_ in Word export File QP Markers are connected with a line
• #11078: Error when using Quasi-Peak detection with 120 kHz RBW on a R&S ESL6
• #11170: Driver: Yokogawa FG420.
• #11216: Test receiver ESL 6 (9kHz-6GHz): Specific System Error: -200,"Execution error; Function not available; BAND 9 KHZ"
• #11403: Driver: Tektronix RSA507A
• #11446: Indication of Modulation in Multiband Immunity.
• #11450: Rohde & Schwarz FSL 6: Specific System Error: -222,"Data out of range; INP:ATT 50 DB".
• #11457: Time based ramp up is not linearly increasing.
• #11458: Settings the test state in EFT/Surge Manual does not correctly progress the test state
• #11459: Specifying a ramp-down or ramp-up with 0.1 dB accuracy is not remembered
• #11471: Report Generator output file extension is not automaticly matched with the template extension
• #11479: Are Limit lines auto-included when exporting graphs using the report generator.
• #11482: ErrorReport: "Client information is not stored in EUT file"
• #11497: graph->customization->(chart)scaling button selection is not behaving correctly
• #11498: Driver: Teseq RFB 2000
• #11502: Driver: R&S HP907
• #11517: Text in EUT-overview is disappearing
• #11519: Font 'Quicksand' does not support style 'Regular' on a Windows 7 SP1 PC.
• #11521: UFA Calibration table does not show all data.
• #11526: ErrorReport: "The software freezes or locks up after measure" with a PMM9010
• #11529: Change the tab order in RI and RE.
• #11532: RPR3006W #010 (8GHz).
• #11535: Inn-Co CO 3000 (Unit 1): Syntax is sent when an invalid command is received.
• #11541: e-mail address shown on about window is incorrect.
• #11542: Conducted emission multiband status window doesn't resize the content in the height.
• #11543: EFT surge kan geen andere spanningen dan 1, 2, 5, 10 kV
• #11547: ErrorReport: "Unable to create a database link"
• #11548: Wavecontrol SMP2: "External component has thrown an exception."
• #11549: ErrorReport: "Bands graph not full after reseizing TSF settings"
• #11551: Entering high values(as user input) for Ri & Ci in PI Surge manual mode triggers an stackoverflow exception
• #11552: PI bands Copy&duplicate buttons size
• #11558: Provided frequency is too high: DARE.RadiMat.FrequencyMHz MHz.
• #11562: Pulsed immunity surge test: index was out of range.
• #11564: Table on the radiated emission manual mode window is drawn outside the visual area.
• #11567: Full screen graph is not scaling in Radiated Emission Multiband.
• #11571: Driver: Prana N-MT 250D
• #11573: ErrorReport: "Limit lines are gone if I sellect all 3 freq. bands"
• #11575: Crash when an unexpected GPIB EDVR is detected
• #11579: ErrorReport: "No status visible of carrier and modulation"
• #11582: Reduce general tabs icon size.
• #11585: Showing the About screen from the menu, will crash the software.
• #11586: ErrorReport: "GPIB lock error"
• #11591: ErrorReport: "Moving antenna als er niet gemoved moet worden"
• #11595: Where did the general info button go to?
• #11621: How to apply correction of van Veen loop?

RadiMation version 2020.2.7

• #8377: Conducted Immunity CS not able to execute in MB test error Illegal Conducted Immunity Calibration File
• #10434: HP 34401A always uses the DC V setting Instead of AC V and therefore we are not able to calibrate
• #10436: HP 34401A MultiMeter - By default select AC Coupling
• #10819: Change default name of installation directory
• #10920: In Word export File QP Markers are connected with a line
• #10960: You are not allowed to edit this selection because it is protected.
• #11133: HP 34401A cannot be used in AC mode
• #11205: ErrorReport: "No voltage level indication available in CI-MB
• #11212: Graph customization configuration shows dB(m) as unit instead of dB
• #11284: "No current level indication available in CI-MB
• #11286: Change email adres in language files.
• #11326: CI - CS101 - SB - Power is not limited to value stored in Calibration file
• #11330: Report generator data inserted in wrong columns
• #11338: RadiMation does not reset previous shown sub-windows when restarted on dual monitor systems
• #11344: Unclear message: 'Connect powermeter to reference' during amplifier compression system calibration
• #11346: ErrorReport: "Collection was modified; enumeration operation may not execute."
• #11360: ErrorReport: "Signal power went too high (-6 dBm) during power delivery test"
• #11377: ErrorReport: "Object reference not set to an instance of an object."
• #11385: Better error description for The factory for the persistable object is not registered
• #11389: ErrorReport: "Object reference not set to an instance of an object.", when calculating the UFA
• #11390: Error code from RadiSense IV is reported as another error
• #11410: Adjust form "Test Engineer" to use the notification control.
• #11415: Using edit button EUT Information is not doing anything
• #11417: ErrorReport: "Input string was not in a correct format."
• #11431: Anchoring and resizing of frmSequence.cs
• #11437: "incorrect pass/fail statement on EUT overview page"
• #11439: Cannot update drivers for Raditeq RadiMation
• #11440: Cannot change language in 2020.2.6.
• #11443: Rohde & Schwarz FSL 6: Specific System Error: -148,"Character data not allowed; INP:COUP AC".
• #11444: Driver: RS1860B stick probe.
• #11449: ErrorReport: "Keyboard functions not working when browsing for EUT file"
• #11452: Report generator issues (graph not included + unit text missing in description)
• #11453: Report generator does not include column: Peak Value
• #11458: Settings the test state in EFT/Surge Manual does not correctly progress the test state
• #11460: Treeview selection control on graph export is not correctly sized.
• #11472: Include correct dialogs dll in setup.
• #11475: Units are not visible behind start frequency.
• #11481: Functionality to include the AD-channels as a table in generated reports
• #11485: Column ‘selected’ with text ‘true’, when no final peaks are measured.
• #11515: R&S FSU raises error when Preamplifier is used above 3.6 GHz
• #11520: How to add additional cal kits in RadiMation
• #11533: Test receiver ESL 6 (9kHz-6GHz): Specific System Error: -200,"Execution error; Function not available; BAND 120 KHZ".
• #11596: XAL: How to improve "overall" measurement time!

RadiMation version 2020.2.6

• #4170: Report generator ability export table cells without unit
• #10852: Error -2147024893 after initial installation
• #11000: Cannot find field probe 0 in the currently active testsite.
• #11168: Driver: Ametek CIP 9136A.
• #11171: Driver: BONN Elektronik BDC 1060-20/200.
• #11172: Driver: Schwarzbeck HA9251-48.
• #11180: Driver: BONN Elektronik BSA0140-250.
• #11181: Driver: BONN Elektronik BLWA2010-400.
• #11182: Driver: Ametek CBA 1G-1000.
• #11183: Driver: Ametek CBA 3G-450.
• #11231: ErrorReport: "Error Virtual device and then out of memory error after second run of LISN test: "
• #11247: Version number that is included in the ErrorReport e-mail has 4 parts instead of normally communicated 3 parts
• #11303: Report generator keywords for impedance are not described in the manual
• #11305: Opening >1 LLF from explorer having RadiMation closed will lock the file.
• #11311: Table of content starts at level 4
• #11324: Logarithmic value interpolation is not working
• #11400: Buttons in PI- EFT are not according to GUI guidlines.
• #11407: Configure button standards, icons are missing.
• #11408: Move save as button in Test equipment screen.
• #11409: Make it possible to show delete or remove in the ctlAddEditRemove control
• #11413: Duplicate button is not perfectly aligned, as it is placed slightly lower than the other buttons
• #11442: Driver: RS2018B probe.

RadiMation version 2020.2.5

• #10788: R&S ESU26: Receiver (ID1465) Input 1 (LAN): More points received from the receiver/analyzer then calculated.
• #11249: problem with generating logarithmic step from immunity testing in report
• #11289: RI MB TSF cause crash.
• #11381: Embedded font warning when opening pdf manual

RadiMation version 2020.2.4

• #10681: convert main menu to the DevExpress XtraRibbon
• #10682: Build dynamic devices menu in XtraRibbon
• #10683: Build dynamic testsite menu in DevExpress XtraRibbon
• #10861: Add a 'Configure' button on the Standard selection dialog.

RadiMation version 2020.2.3

• #10708: Put controls that are directly on a form in a panel
• #10722: Retrieve gray-scaled pictures to be included on buttons
• #10723: Change colored pictures to gray-scaled pictures
• #10975: Data of S-Parameter measurement is not shown anymore
• #11012: Icons for the correction file selection on the device driver configuration are huge
• #11029: Object reference error when a new heliview antenna diagram location is created
• #11030: Value cannot be null, when specifying the address of the Heliview location
• #11031: Smallest window size of Heliview Integrity test is not correct
• #11032: Starting the Heliview integrity test crashes RadiMation
• #11160: When 'measure during turn' is activated without a turntable in the testsite, the tests stops very fast without warning

RadiMation version 2020.2.2

• #10706: About window dynamic version number update.
• #10707: Replace all controls on all windows.
• #10709: Replace the icon on all the windows.
• #10712: Update windows and controls in the shared libraries.
• #10713: Replace all popup menus to use the DevExpress popup menu.
• #10848: InvalidArgument=Value of '0' is not valid for 'DropDownHeight'.
• #10853: Scrolling in screenshot image of error report is not possible anymore.
• #10856: Oldest line of the eventlog is selected.
• #10857: Customize button on the Graphs tab of the configuration dialog is partially hidden.
• #10862: Two different languages are marked as '(Current)'.
• #10864: Company logo of the reseller is not shown anymore.
• #10873: Object reference error.
• #10882: Activate DirectX support on the skinned version.
• #10893: The date picker is no longer available.

RadiMation version 2020.2.1

• #10684: Shorten the menu entries in the (main) menu
• #10706: About window dynamic version number update.
• #10711: update darelang to accept devexpress controls
• #10750: Ampersands are shown in the new ribbon menu
• #10835: Could not load file or assembly 'DevExpress.Dialogs.v19.2.Core
• #10881: One-tabpage tabcontrols to show as a border have a TabStop