Difference between revisions of "Release Notes/Solved items Version 2021.2.7"
(→RadiMation version 2021.2.7) |
(→RadiMation version 2021.2.7) |
||
| Line 1: | Line 1: | ||
== RadiMation version 2021.2.7 == | == RadiMation version 2021.2.7 == | ||
| + | * #4246: Possibility to insert note in "read only" protected TSF before mesurement starts | ||
| + | * #10935: CI manual mode. Make sure to set the settings of the signal generator when modulation is switched of and on so that this setting is imediatly applied | ||
| + | * #11373: DARE!! Development RadiSense IV: Device returned Error code : 4. | ||
| + | * #11739: Add option in R&S ESW driver to active low noise amplifier (for lower noise floor) | ||
* #11846: Measured differences between RadiMation and PMM software when Testing CE/RE | * #11846: Measured differences between RadiMation and PMM software when Testing CE/RE | ||
* #12078: Absorbing clamp Maturo FCU: Function not implemented error | * #12078: Absorbing clamp Maturo FCU: Function not implemented error | ||
* #12087: Opening test data older than 2021.2.1 results in missing distance data | * #12087: Opening test data older than 2021.2.1 results in missing distance data | ||
* #12088: ErrorReport: "RI with rot pos, 1 step, 120 degrees". | * #12088: ErrorReport: "RI with rot pos, 1 step, 120 degrees". | ||
| + | * #12091: Build RadiMation 2021.2.7 | ||
| + | * #12144: Device driver configuration dialog cannot be shown, due to problem of loading GenericTabbedDialog | ||
| + | * #12147: How to disable the power delivery test, to prevent that generated frequencies are really in order | ||
| + | * #12165: Start Frequency is too low for the selected equipment | ||
| + | * #12211: Ability to use an automatic calkit for the R&S ZNB VNA calibration | ||
| + | * #12217: Agilent technologies U2004A driver problem: Insufficient location information | ||
| + | * #12219: Rohde & Schwarz NRP-Z91: Impossible to get description string for this Error! Probably an unknown RadiMation Error. Code: 805313470 (0x30001BBE) | ||
| + | * #12239: Driver: MTS Systemtechnik KRE-4000 | ||
| + | * #12291: Question: Forward power amplifier protection file is not found | ||
| + | * #12293: Error message: There is no average probe selected | ||
| + | * #12295: Incorrect RBW of 1 MHz with QP detector in range 1GHz-6GHz | ||
Latest revision as of 13:15, 20 January 2022
RadiMation version 2021.2.7
- #4246: Possibility to insert note in "read only" protected TSF before mesurement starts
- #10935: CI manual mode. Make sure to set the settings of the signal generator when modulation is switched of and on so that this setting is imediatly applied
- #11373: DARE!! Development RadiSense IV: Device returned Error code : 4.
- #11739: Add option in R&S ESW driver to active low noise amplifier (for lower noise floor)
- #11846: Measured differences between RadiMation and PMM software when Testing CE/RE
- #12078: Absorbing clamp Maturo FCU: Function not implemented error
- #12087: Opening test data older than 2021.2.1 results in missing distance data
- #12088: ErrorReport: "RI with rot pos, 1 step, 120 degrees".
- #12091: Build RadiMation 2021.2.7
- #12144: Device driver configuration dialog cannot be shown, due to problem of loading GenericTabbedDialog
- #12147: How to disable the power delivery test, to prevent that generated frequencies are really in order
- #12165: Start Frequency is too low for the selected equipment
- #12211: Ability to use an automatic calkit for the R&S ZNB VNA calibration
- #12217: Agilent technologies U2004A driver problem: Insufficient location information
- #12219: Rohde & Schwarz NRP-Z91: Impossible to get description string for this Error! Probably an unknown RadiMation Error. Code: 805313470 (0x30001BBE)
- #12239: Driver: MTS Systemtechnik KRE-4000
- #12291: Question: Forward power amplifier protection file is not found
- #12293: Error message: There is no average probe selected
- #12295: Incorrect RBW of 1 MHz with QP detector in range 1GHz-6GHz
