D.A.R.E!! Development RadiCentre (4 Port)
Configuring the RadiSwitch
This tutorial is written for a 2 port switch but is the same for all the others.
 During and After
|
There are two situation where it is possible to specify the switch configuration. These two situations are during and after the test. The setting during the test is send to the switch matrix just before the test is started. The setting after is send to the switch matrix after the test has ended. The idea behind it is that the setting during and after the test can be completely different. A possible situation is that the input of the analyser needs to be switch from the antenna, after the test has ended, to be sure that it is not blown up. Another possible scenario is that the high power amplifier is switched to a dummy load to be sure there is no RF power in the chamber. |
| Internal and External
|
The settings for the internal an the external switches can be set separately. |
| Device ID
|
The switch matrix can be inserted in 1/2 or 8 channel system, in order to communicate with the correct card RadiMation® has to know in which slot the card is inserted. |
| Communication
|
Select the communication media used to connect the PC to RadiCentre. |
The D.A.R.E!! Development RadiCentre (4 Port) device driver is a Switch Matrix which is supported by RadiMation®.
Related pages
Links
- Google search: D.A.R.E!! Development RadiCentre (4 Port)
- Google image search: D.A.R.E!! Development RadiCentre (4 Port)
| This information about an equipment is automatically generated from the list of supported device drivers from RadiMation. |
| If you need more information you can contact radimation-support@raditeq.com. |
