BBAConfiguration: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=== Communication === | |||
{{:DeviceDriverCommunicationTab}} | {{:DeviceDriverCommunicationTab}} | ||
To | To setup the communication using VISA and ethernet use the "Visa-id" with value "TCPIP0::10.0.0.6::5025::SOCKET" | ||
Make sure to replace 10.0.0.6 with the IP address of the amplifier | Make sure to replace "10.0.0.6" with the actual IP address of the amplifier. | ||
Revision as of 12:06, 18 November 2025
Communication[edit]
On the Communication tab, the desired communication method can be selected and configured. Depending on the selected method, additional relevant settings are shown and can be configured.
 Communication Streams
|
Selects the medium or method that should be used to communicate with the device. Depending on the capabilities of the device this can be one or more of:
Depending on the selected communication stream, additional configuration parameters can be configured. See the Communication Settings in Chapter 15, on how to configure each of these communication streams. |
To setup the communication using VISA and ethernet use the "Visa-id" with value "TCPIP0::10.0.0.6::5025::SOCKET"
Make sure to replace "10.0.0.6" with the actual IP address of the amplifier.