Release Notes/Solved items Version 2025.1.5: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== RadiMation version 2025.1.5 == * #15505: Milmega: automatically detect which controller AC-001 or AC-002 is used * #16015: Added R&S BBA150 DDC25 couplers * #16066: Signal power graph is now available when a multiband closed loop field test level is used * #16129: Display a warning in the event log of a test if the measurement is not within the 'max difference' after the 'max measure' measurements * #16147: Driver: COM-POWER CLCI-400 * #16148: Driver: COM-POWER FCLC-...") |
(No difference)
|
Latest revision as of 08:27, 4 December 2025
RadiMation version 2025.1.5[edit]
- #15505: Milmega: automatically detect which controller AC-001 or AC-002 is used
- #16015: Added R&S BBA150 DDC25 couplers
- #16066: Signal power graph is now available when a multiband closed loop field test level is used
- #16129: Display a warning in the event log of a test if the measurement is not within the 'max difference' after the 'max measure' measurements
- #16147: Driver: COM-POWER CLCI-400
- #16148: Driver: COM-POWER FCLC-400
- #16149: Driver: COM-POWER CLCE-438
- #16150: Driver: COM-POWER FCLCE-438
- #16151: Driver: COM-POWER AM-741R
- #16152: Driver: COM-POWER AB-300M
- #16153: Driver: COM-POWER ALC-100
- #16154: Driver: Schwarzbeck FTC 101
- #16166: Driver: Schwarzbeck 419 NJ
- #16232: Exporting graphlines is fixed
- #16267: Configure min/max limits for temperature, pressure, and humidity in the Netatmo environmental data provider’s advanced settings.
- #16298: Ask the user to reattach the changed EUT attachment if its content has been modified
- #16300: Preserve the order of the attachments when the EUT is saved
- #16331: Change wording in RadiSense driver from "user calibration" to "user correction"
- #16356: Driver: GW Instek GLN-5040A (LISN)
- #16360: Driver Prana LT500DC
- #16381: Add support for frequency translation for Signal Generators, allowing the use of frequency doublers and similar external translation devices.
- #16395: Allow the setting of a custom negative start/end angle for the rotational positioner (within the allowed range)
- #16409: HP34401 Sets the sample count correctly now based on available memory
- #16422: Do not display Relay B in the advanced configuration -> "Switches" tab when only one Relay is available
- #16425: Change wording "Software update" to "Firmware update" for all Raditeq devices
- #16432: RPR4000 series firmware updater fix for version 4.4.1 and lower
- #16445: Keysight U2021XA Power Meter improved IMM and FETCh commands
- #16450: Updated several LISN drivers with correct end frequency
- #16458: Fixes an error message for CI MB where the frequency is lower than the start frequency of the selected calibration file
- #16459: R&S SMA100B is usable from 8 kHz
- #16482: Prana N-DT 170/130D
- #16494: Exporting graphlines is fixed