RadiMationInterface.can: Difference between revisions

From RadiWiki
Jump to navigation Jump to search
Line 53: Line 53:
==Test_Modulation_Off==
==Test_Modulation_Off==
==Antenna_Movement_Started==
==Antenna_Movement_Started==
Starting of the movement of the antenna tower with the target position of the antenna tower.
'''Parameter:''' position
'''Unit parameter:''' Meter
==Antenna_Movement_Stopped==
==Antenna_Movement_Stopped==
The stop position of the antenna tower.
'''Parameter:''' position
'''Unit parameter:''' Meter
==Antenna_Movement_Percentage==
==Antenna_Movement_Percentage==
The current percentage of the antenna tower movement from the start position to the end position
'''Parameter:''' percentage
'''Unit parameter:''' %
==Antenna_Movement_Changing_Polarisation==
==Antenna_Movement_Changing_Polarisation==
==TurnTable_Movement_Started==
==TurnTable_Movement_Started==
Starting of the movement of the turn table with the target position of the turn table.
'''Parameter:''' position
'''Unit parameter:''' Degrees
==TurnTable_Movement_Stopped==
==TurnTable_Movement_Stopped==
The stop position of the turn table.
'''Parameter:''' position
'''Unit parameter:''' Degrees
==TurnTable_Movement_Turning_Percentage==
==TurnTable_Movement_Turning_Percentage==
The current percentage of the turn table movement from the start position to the end position
'''Parameter:''' percentage
'''Unit parameter:''' %

Revision as of 08:59, 28 October 2010

The RadiMationInterface.can is an interface between the RadiMation software and CANoe and CANalyser.

By inserting this file inside your CANoe/CANalyser project you are able to extract information from RadiMation using CANoe/CANalyser.

You can download the file here

Explanation of available events/functions[edit]

Test_Frequency[edit]

The current frequency of the test, in other words the frequency of the signal generator.

Parameter: mdFreqMHz

Unit parameter: MHz

Test_Carrier_Level[edit]

The carrier level of the signal generator

Parameter: mdPowerIndBm

Unit parameter: dBm

Test_Forward_Power[edit]

The measured value of the forward power.

Parameter: mdPowerIndBm

Unit parameter: dBm

Test_Reflected_Power[edit]

The measured value of the reflected power.

Parameter: mdPowerIndBm

Unit parameter: dBm

Test_Average_Field[edit]

The measured value of the average field.

Parameter: mdFieldVm

Unit parameter: V/m

Test_Calculated_Field[edit]

The calculated value of the field based on the calibration file.

Parameter: mdFieldVm

Unit parameter: V/m

Test_Measured_Current[edit]

Test_Sensor_Power[edit]

Test_Amplitude_Modulation_Internal[edit]

Test_Amplitude_Modulation_External[edit]

Test_Frequency_Modulation_Internal[edit]

Test_Frequency_Modulation_External[edit]

Test_Pulse_Modulation_Internal[edit]

Test_Pulse_Modulation_External[edit]

Test_Modulation_On[edit]

Test_Modulation_Off[edit]

Antenna_Movement_Started[edit]

Starting of the movement of the antenna tower with the target position of the antenna tower.

Parameter: position

Unit parameter: Meter

Antenna_Movement_Stopped[edit]

The stop position of the antenna tower.

Parameter: position

Unit parameter: Meter

Antenna_Movement_Percentage[edit]

The current percentage of the antenna tower movement from the start position to the end position

Parameter: percentage

Unit parameter: %

Antenna_Movement_Changing_Polarisation[edit]

TurnTable_Movement_Started[edit]

Starting of the movement of the turn table with the target position of the turn table.

Parameter: position

Unit parameter: Degrees

TurnTable_Movement_Stopped[edit]

The stop position of the turn table.

Parameter: position

Unit parameter: Degrees

TurnTable_Movement_Turning_Percentage[edit]

The current percentage of the turn table movement from the start position to the end position

Parameter: percentage

Unit parameter: %