Release Notes/Solved items Version 5.6: Difference between revisions

From RadiWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{:Release Notes/Solved items Version 5.6.12}}
{{:Release Notes/Solved items Version 5.6.11}}
{{:Release Notes/Solved items Version 5.6.10}}
{{:Release Notes/Solved items Version 5.6.9}}
{{:Release Notes/Solved items Version 5.6.8}}
{{:Release Notes/Solved items Version 5.6.7}}
{{:Release Notes/Solved items Version 5.6.6}}
{{:Release Notes/Solved items Version 5.6.5}}
{{:Release Notes/Solved items Version 5.6.4}}
{{:Release Notes/Solved items Version 5.6.3}}
{{:Release Notes/Solved items Version 5.6.2}}
{{:Release Notes/Solved items Version 5.6.2}}
{{:Release Notes/Solved items Version 5.6.1}}
{{:Release Notes/Solved items Version 5.6.1}}
{{:Release Notes/Solved items Version 5.6.0}}
{{:Release Notes/Solved items Version 5.6.0}}

Latest revision as of 12:31, 15 April 2010

RadiMation version 5.6.12[edit]

  • #3073: Trace gaps on emission plots
  • #3678: Peak detected in first band but not in second band

RadiMation version 5.6.11[edit]

  • #3502: RadiMation stays in a never ending loop to zoom the peak
  • #3634: Scaling in CE multiband is going to -1000 during the test.
  • #3673: Peak selection is not working as expected after deselecting all the peaks
  • #3675: Configuration for optimize angle and height has problems with the measure- and observation time of different detectors
  • #3676: During Optimize Height actual defined settings are not used but settings defined a step before
  • #3677: When you press <<Detect Peaks>> after a radiated emission test in multiband you can not select more than one peak afterwards.
  • #3680: Configurable device signal generator device driver is not taking the correct codes in version 5.6.9
  • #3682: Emission multiband is slow when 200 peak sweeps are used

RadiMation version 5.6.10[edit]

  • #2920: disable zoom in does not work directly
  • #3565: Negative turntable angles should be allowed in combination with the "measure during turn" option
  • #3622: January and February dates are not detected on a non-english PC
  • #3629: Changing the test order before reporting is crashing the RadiMation
  • #3631: Dongle is only detected correctly the first time on a windows 2000 SP4 and version 5.6.9 of RadiMation
  • #3632: Carrier level jumps directly from -100 dBm to +1 dBm when it should go up 1 dBm

RadiMation version 5.6.9[edit]

  • #3270: Graphs in MultiBand
  • #3590: Final peak measurement is performed too often
  • #3591: Report generator is using more than 500 MB of memory

RadiMation version 5.6.8[edit]

  • #3586: CE multiband LISN test does not perform the band measurement

RadiMation version 5.6.7[edit]

  • #1845: Change the size of the Select a TSF file window
  • #3548: List of selected equipment in testsite selection window is grayed
  • #3851: RE mil std test is not displaying the markers correctly
  • #3582: Difference to peak limit is incorrect in the re magnetic test
  • #3583: The reference level of the RE magnetic field test is 0 or auto

RadiMation version 5.6.6[edit]

  • #3479: driver: PMM EP600
  • #3532: SMR20 should generate an error when going below the minimum value of the signal generator
  • #3536: Crash when a graph is shown
  • #3542: Attachments in the External test results test are not shown in the table
  • #3550: Configuration directory path uses a limited path length
  • #3558: R&S NRP-Z91 device driver crashes when R&S DLL's are not installed
  • #3571: HP 8562A frequency range is incorrect, the top frequency is 22 GHz.
  • #3574: Bonn amplifier BLMA 1080-60/35/20D is not working correctly when using the USB interface.
  • #3577: ESU analyser driver does not set the pre-amplifier and the pre selector.
  • #3578: EN 61000-4-3 2008 version should be added to uniform field area calculation
  • #3579: RS232 communication with RadiSense plugin card is problematic
  • #3580: PMM OR 03 device connection check is not working always

RadiMation version 5.6.5[edit]

  • #3471: regulation problem when leveling on net-power while limiting forward power
  • #3538: Driver: Agilent N5183A

RadiMation version 5.6.4[edit]

  • #2945: Inserting Table is crashing the Software
  • #3202: Table to clipboard button does not work, right click on the table is ok.
  • #3205: If 'peaks' is selected extra graphs appear. There does not appear to be any way of removing them after they have been created.
  • #3221: There are problems with importing results from multiband Tsfs.
  • #3474: Improvements to Polar plot and height plot to show information of the selected peak
  • #3539: Readout of Amplifier Research FI 7000 does not work
  • #3540: Crash when the sorting of the columns in the report generator window is changed
  • #3541: Not possible to include an attached photo from an external test results test into the report

RadiMation version 5.6.3[edit]

  • #2626: Capl interface is lacking the turn table and the antenna polarisation
  • #2796: R&S ESI cannot be used as an powermeter from 20 Hz
  • #2925: Driver for Yokogawa Oscilloscope DL1740
  • #3383: AC/ DC selection is not possible with the ESU
  • #3393: Radimation Multiband Anechoic Chamber dBuV - dBm projection is incorrect
  • #3443: Reseller logo emitec
  • #3468: peak measured at wrong frequency with ESU 8 in Time Domain
  • #3484: possibility to configure scan resolution for ESU in analyser mode
  • #3485: HP 8542E does not allow the filter selection for the second input
  • #3491: TEST ENGINEER keyword in the report generator does not work for a multiband
  • #3492: ESIB 26 is generating waiting for OPC errors and is not reacting to the GPIB bus any more, restore only with mains cycle
  • #3493: Graph line update with real hardware is causing > 2 GB of memory usage, while virtual is much lower
  • #3496: hi 4455 configuration window does not work correctly
  • #3498: Merge function does not support the G-tem test.
  • #3500: file does not want to be saved when the disk is full of write protected
  • #3501: Not every version of RadiMation is displayed in the control panel
  • #3506: 5.1 dB limitation does not work correctly with ci fixed current test.
  • #3507: EUT controller not working as expected
  • #3510: Memory usage with the ESU in scanning receiver mode is increasing
  • #3511: ESU scanning receiver is using port 1 while 2 is selected
  • #3512: Signalgenerator Agilent/HP E8257C not working anymore
  • #3515: Frequency band user control is looks funny when 2 band are after one another.
  • #3524: Amount of samples does not work in the Attenuation system calibration when the value is not changed
  • #3529: Hp 34401A configuration window does not work correctly, the settings are not saved
  • #3531: Agilent N9310A has got problems doing the init after updating the Visa lib

RadiMation version 5.6.2[edit]

  • #2134: AD Convertor device driver that monitors received measurement values on the serial port
  • #2447: Emco 2090 driver update after install
  • #2645: Call was rejected by the callie
  • #3028: option to remove the overrange warning from the 4455 driver
  • #3053: Driver: Pmm 8051 + probe BA05
  • #3423: the "Print Report"-Box in the Report Generator is activated by default.
  • #3479: driver: PMM EP600
  • #3481: Import rsus substitution file is incorrect
  • #3482: Release note is not generated in the automated build scripts
  • #3486: FSEM 30 Input 1 and input 2 are incorrect because the device only has 1 input.
  • #3488: Multi band manual mode generates an error of start stop frequency during the init of the test

RadiMation version 5.6.1[edit]

  • #3478: An error message is shown when the configuration window of the Agilent 4440 is closed
  • #3477: Using a sub template as an template for reporting after the tests results in an empty graph
  • #3472: Sorting peaks according to numbers does not work correctly
  • #3470: peaks wrongly detected & merged graphs wrongly displayed
  • #3469: Limitation of net-power instead of forward power
  • #3466: Second band of a emission multiband test is using the same step frequency as the first band
  • #3464: Crash (error 91) when the configuration window is closed
  • #3463: Kalmus 757LC amplifier is not working. Test seems to hang
  • #3462: SMA100A is going to 0 dBm all the time
  • #3452: Driver Antenna AR AT5080 and Schwarzbeck HFRA9150
  • #3451: Driver: Teseq CBA 1G-1000 and milmega AS0104-400/200
  • #3439: Starting level of a multiband test is -100 while the start level setting of the signal generator is -50 in the configuration
  • #3375: Error message from ESU8 in CE/RE-MB test "more points received than expected"
  • #3094: Using a measure and observation time of both 5 seconds is raising problems with the R&S ESU
  • #3017: ESU-40 driver issues in FFT mode
  • #2589: R&S ESU (GPIB controlled) and R&S ESU (LAN controlled) should be combined into a single driver
  • #2745: Problems with ESU 8 when doing Time Domain Scan
  • #2871: Determination of interference threshold does not work at BCI closed loop
  • #2958: R&S SME 03 AM 0% instead of off to prevent the relay from dying

RadiMation version 5.6.0[edit]

  • #420: Option to limit the power in a conducted immunity substitution test, based on the calibrated forward power
  • #421: Configurable device driver for reading out an AD-convertor
  • #954: Step frequency in RE test
  • #1302: EMI test with log. Frequency steps
  • #1741: PSA limit not the only one describing power limitation on forward power calibration
  • #1803: Device driver for AR 500W1000 is conflicting for different end-users
  • #1811: Switch matrix device driver for the HP 3488A
  • #2145: Amplifier is switch in POWER OFF after BCI test
  • #2450: Changing description 'PSA-Limit' to 'Power Limit' in BCI
  • #2538: Not possible to level on the current in CI substitution manual mode
  • #2699: During a 'Check' for a device, all the other controls should be disabled
  • #2774: Question to CE measurement (problem with accuracy of detected peak)
  • #2881: Driver: Advantest R3131A as powermeter
  • #2925: Driver for Yokogawa Oscilloscope DL1740
  • #2929: A small misspell in the CE test.
  • #2957: RadiSwitch 6 port does not have an option to not switch the relay
  • #3111: How to level on the current during BCI substitution tests?
  • #3178: 500W1000 is not switched to OPERATE in version 5.3.18
  • #3182: RadiMation sets Anritsu 2623B to wrong settings
  • #3185: Driver: SUNOL CONT94
  • #3231: 150A400 "needs" a reset command when leaving manual mode
  • #3248: Selecting square wave AM modulation does not change the waveform on the Agilent 83640B, and it doesn't raise an error
  • #3264: Speaker of the HP 8591E analyser is sometimes activated
  • #3318: files are getting bigger, customer can't open them anymore
  • #3320: wrong remeasured frequencies in Radiated Immunity (singleband)- Manual Mode
  • #3334: Peak not detected when zooming in Multiband Emisson graph
  • #3337: How is the Ramp in Mult. Im. configured?
  • #3338: Problems starting Cond. Im. Multiband
  • #3379: Final measurement with QP detector using a PMM 9030 receiver results in a software crash
  • #3391: Clean install crashes when opening device driver configuration window
  • #3392: clean install sets the configuration directory incorrectly to Radimationconfdvdr
  • #3399: HP8657 signal generator driver does not support 400 Hz AM.
  • #3405: Rs-232 support for the configurable switch matrix
  • #3406: signal generator sml03 sometimes is not responding to opc?
  • #3408: Driver FC03, turn table and antenna tower controller
  • #3413: Carad driver is reporting mcItestData is nothing
  • #3416: AM modulation indication on the HP 83630 is not activated
  • #3417: Using the ESU tracking generator as a signal generator for the attenuation measurement
  • #3422: PSA preselector need option to set the preselector off so that you can measure above the 1 GHz.
  • #3426: Driver: Agilent 87405C pre amplifier
  • #3428: Driver: HP 59307
  • #3426: Driver: ESV-Z1 VHF Current Probe
  • #3430: Driver: LISN PMM L3-64
  • #3431: Driver: ENI 603L and 411LA
  • #3432: Driver: Solar 9142-1N and 9719-1N
  • #3433: Driver: EATON 93686-8L and EM test HFK
  • #3437: LISN ESU User port
  • #3438: TDS220 is only available as an AD convertor not as an oscilloscope
  • #3448: Conducted Immunity Fixed Current with activated performance threshold is crashing
  • #3460: Format string does not work correctly with %lf and a double.