Latest revision as of 07:10, 21 July 2014

Cannot find antenna tower in the currently active testsite

This error is normally raised during the start of a Radiated Emission test, because no Antenna Tower is present in the testsite/test equipment.

Include an Antenna Tower device driver to the used equipment to avoid this message. If there is no real Antenna Tower available use a Virtual Device Driver by choosing the Virtual Antenna Tower device driver from the list of available drivers;

1. Create or select a new Antenna Tower device driver. 2 Add this device to the Test equipment. 3. Save changes. 4. Restart the test.

@@ Line 1: / Line 1: @@
 = Cannot find antenna tower in the currently active testsite =
-This error is normally raised during the start of a Radiated Emission test, because no Antenna Tower is present in the testsite/test equipment.
+This error is normally raised during the start of a [[Radiated Emission]] test, because no Antenna Tower is present in the testsite/test equipment.
 == Solution ==
-* Include an Antenna Tower device driver to the used test equipment to avoid this message. If there is no real Antenna Tower available use the Virtual Antenna Tower device driver from the list.
+* Include an Antenna Tower device driver to the used [[equipment]] to avoid this message. If there is no real Antenna Tower available use a Virtual [[Chapter_15 | Device Driver]] by choosing the [[Virtual Antenna Tower]] device driver from the list of available drivers;
-Create or select a new Antenna Tower device driver and add this to the Test equipment. Save changes. Restart the test.
+. Create or select a new Antenna Tower device driver. 2 Add this device to the Test equipment. 3. Save changes. 4. Restart the test.
 [[Category:RadiMation Error]]
 [[Category:RadiMation]]