File:ResultingCorrectionFile.png: Difference between revisions

Revision as of 11:53, 11 July 2023

Shows a correction file with the intention to upload it to a RadiSense probe. It shows the columns:

Be aware that the frequencies that are shown should be usable for a RadiSense probe, thus using a lowest frequency of 9 kHz is OK.

[Category:Screenshot]

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User
current	11:50, 11 July 2023	501 × 504 (14 KB)	Joro (talk \| contribs)
	16:17, 8 March 2021	505 × 507 (16 KB)	Jeru (talk \| contribs)
	16:10, 8 March 2021	1,005 × 497 (31 KB)	Jeru (talk \| contribs)
	16:08, 8 March 2021	1,003 × 497 (32 KB)	Jeru (talk \| contribs)
	16:04, 8 March 2021	1,009 × 503 (40 KB)	Jeru (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Horizontal resolution	37.79 dpc
Vertical resolution	37.79 dpc

@@ Line 1: / Line 1: @@
+Shows a correction file with the intention to upload it to a RadiSense probe.
+It shows the columns:
+* Frequency
+* X-axis correction
+* Y-axis correction
+* Z-axis correction
+Be aware that the frequencies that are shown should be usable for a RadiSense probe, thus using a lowest frequency of 9 kHz is OK.
+[Category:Screenshot]