Difference between revisions of "User:Jewe"
(→E-mail notification) |
(→E-mail notification) |
||
Line 5: | Line 5: | ||
− | = | + | = Signal generator driver test = |
− | + | ||
+ | The following settings need to be tested: | ||
+ | |||
+ | '''Normal operation''' | ||
+ | # Amplitude | ||
+ | # AM, 80% 1 kHz | ||
+ | # FM | ||
+ | # PM 50% 1 KHz. | ||
+ | {{note|All modulations needs to tested with a scope if the signal generator does not allow the settings to be read from the display.}} | ||
+ | |||
+ | '''Error Operation''' | ||
+ | # unplug the communication cable during testing | ||
+ | # Set the AM to out of boundary settings, for example 0% or 1 MHz, this is not supported by the machine. | ||
+ | # Set the AM to out of boundary settings, for example 1 Hz or 1 MHz, this is not supported by the machine. | ||
+ | # Set the PM to out of boundary settings, for example 0,1 Hz and 1%. | ||
= Getting started = | = Getting started = | ||
== Philosophy == | == Philosophy == |
Revision as of 14:19, 3 February 2009
- make new getting started
Signal generator driver test
The following settings need to be tested:
Normal operation
- Amplitude
- AM, 80% 1 kHz
- FM
- PM 50% 1 KHz.
|
Error Operation
- unplug the communication cable during testing
- Set the AM to out of boundary settings, for example 0% or 1 MHz, this is not supported by the machine.
- Set the AM to out of boundary settings, for example 1 Hz or 1 MHz, this is not supported by the machine.
- Set the PM to out of boundary settings, for example 0,1 Hz and 1%.