Release Notes/Solved items Version 5.5.3: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== RadiMation version 5.5.3 == | == RadiMation version 5.5.3 == | ||
* # | * #3368: Crash when pressing markers in the graph customization window in a new installation. | ||
* #3365: SMB 100A is going to 0 dBm all the time | |||
* #3358: Error message while opening ESD TSF file | |||
* #3355: Driver: AR 2500A250A | |||
* # | |||
* # | |||
* # | |||
* #3350: Engineer log in window is not unloaded correctly when false password is given. | * #3350: Engineer log in window is not unloaded correctly when false password is given. | ||
* # | * #3348: impossible to work with surge test, tabs keep on changing | ||
* # | * #3346: Driver: BLWA 0810-100 | ||
* # | * #3345: Driver: Agilent PSA 4440 | ||
* # | * #3340: Rs-232 support for fluke 45 | ||
* #3330: SMB 100A starts at 0 dBm | |||
* #3328: Changes to the description of the limit line doesn't mark the file as changed | |||
* #3327: PMM 9010 is giving error during the Init | |||
* #3315: 180 degrees angle is missing at the Surge test field | |||
* #3314: "STEP FREQUENCY" in generated report is empty | |||
* #3311: In Limit Line definition, button Graph/Customize is present but not working | |||
* #3287: changing the test site in a save tsf is not detected correctly | |||
* #3276: Driver: Current Clamps for installation | |||
* #3275: Time formating is not according to the pc settings | |||
* #3255: Even if the option is disabled, Zoom-in is performed for RE Multiband | |||
* #3250: Driver for amplifier Milmega AS0104-100/100 | |||
* #3238: Unexpected switching of tabs | |||
* #3210: Ramp is not correct for certain frequencies, it either does not ramp or ramps first down and then up again | |||
* #3153: Improve selection of bands to be more 'the Windows way of doing it' | |||
* #3140: Dip in stress test while doing imm. test | |||
* #2997: Bad AM peak conservation for BCI closed loop limited to 4x cal power. | |||
* #2876: Surge test does not allow 180 degrees test | |||
* #2797: Wrong limitation of forward power when using AM modulation | |||
Latest revision as of 12:08, 6 May 2009
RadiMation version 5.5.3[edit]
- #3368: Crash when pressing markers in the graph customization window in a new installation.
- #3365: SMB 100A is going to 0 dBm all the time
- #3358: Error message while opening ESD TSF file
- #3355: Driver: AR 2500A250A
- #3350: Engineer log in window is not unloaded correctly when false password is given.
- #3348: impossible to work with surge test, tabs keep on changing
- #3346: Driver: BLWA 0810-100
- #3345: Driver: Agilent PSA 4440
- #3340: Rs-232 support for fluke 45
- #3330: SMB 100A starts at 0 dBm
- #3328: Changes to the description of the limit line doesn't mark the file as changed
- #3327: PMM 9010 is giving error during the Init
- #3315: 180 degrees angle is missing at the Surge test field
- #3314: "STEP FREQUENCY" in generated report is empty
- #3311: In Limit Line definition, button Graph/Customize is present but not working
- #3287: changing the test site in a save tsf is not detected correctly
- #3276: Driver: Current Clamps for installation
- #3275: Time formating is not according to the pc settings
- #3255: Even if the option is disabled, Zoom-in is performed for RE Multiband
- #3250: Driver for amplifier Milmega AS0104-100/100
- #3238: Unexpected switching of tabs
- #3210: Ramp is not correct for certain frequencies, it either does not ramp or ramps first down and then up again
- #3153: Improve selection of bands to be more 'the Windows way of doing it'
- #3140: Dip in stress test while doing imm. test
- #2997: Bad AM peak conservation for BCI closed loop limited to 4x cal power.
- #2876: Surge test does not allow 180 degrees test
- #2797: Wrong limitation of forward power when using AM modulation