Difference between revisions of "Release Notes/Solved items Version 5.8.37"
(Created page with '== RadiMation version 5.8.37 == * #4102: LISN Emission graph shows a large amount of zero's for the frequency on the x-axis * #4099: INNCO 2000 that only controls the polarizatio…') |
|||
Line 1: | Line 1: | ||
== RadiMation version 5.8.37 == | == RadiMation version 5.8.37 == | ||
− | * # | + | * #4462 Error You are not licensed to use the Report Generator |
+ | * #4461 Driver updates from the Installation and Training visit | ||
+ | * #4452 Driver: default RS232 speed RadiCentre RPR1006A changed | ||
+ | * #4429 Is LLF information saved independently with test data | ||
+ | * #4420 Questions validation and calibration | ||
+ | * #4412 General questions about Report Generator | ||
+ | * #4401 Compatibility controlling RadiPower units with old RM | ||
+ | * #4400 Statements for sorting columns with a space | ||
+ | * #4391: Driver: ETS-Lindgren 7604 | ||
+ | * #4307: R&S ESU40: set measurement bandwidth to 6dB | ||
+ | * #4305: Cause of the difference in noise in region below 1 kHz | ||
+ | * #4304: Driver: no communication PMM EP601 | ||
+ | * #4302: Request for the latest version of RadiMation on CD | ||
+ | * #4300: Possibility to set amount of Reflected Power during Power Delivery Test | ||
+ | * #4283: Driver: Milmega 80RF1000-175 Amplifier | ||
+ | * #4268: Driver: wrong frequency range Agilent N5181A-503 | ||
+ | * #4265: Implementing ESPC driver with option B3 | ||
+ | * #4243: Wrong step size (rounding) in MB | ||
+ | * #4193: Issue auto perform CS114 | ||
+ | * #4189: Show limit curve on graph during Immunity tests | ||
+ | * #4188: Performing RS101 susceptibility test described in MILSTD F | ||
+ | * #4187: Control of a 3 axis antenna system from a R&S receiver | ||
+ | * #4183: Driver for R&S ESR | ||
+ | * #4176: Driver: AR PM2003 | ||
+ | * #4168: RadiSwitch problem during initialisation | ||
+ | * #4154: Report generator crashes when a single band emission graph is included | ||
+ | * #4149: Report generator error 91 | ||
+ | * #4148: Driver: AR 5000A225 | ||
+ | * #4135: Wrong forward power measured with NRVD | ||
* #4099: INNCO 2000 that only controls the polarization | * #4099: INNCO 2000 that only controls the polarization | ||
− | * # | + | * #4086: TDEMI driver with option for multisampling |
− | * # | + | * #4058 Driver: Luthi CDN L-801 AF4 |
− | + | * #544: Include RI and CI manual mode directly in main menu | |
− | * # | ||
− |
Latest revision as of 15:06, 20 December 2012
RadiMation version 5.8.37
- #4462 Error You are not licensed to use the Report Generator
- #4461 Driver updates from the Installation and Training visit
- #4452 Driver: default RS232 speed RadiCentre RPR1006A changed
- #4429 Is LLF information saved independently with test data
- #4420 Questions validation and calibration
- #4412 General questions about Report Generator
- #4401 Compatibility controlling RadiPower units with old RM
- #4400 Statements for sorting columns with a space
- #4391: Driver: ETS-Lindgren 7604
- #4307: R&S ESU40: set measurement bandwidth to 6dB
- #4305: Cause of the difference in noise in region below 1 kHz
- #4304: Driver: no communication PMM EP601
- #4302: Request for the latest version of RadiMation on CD
- #4300: Possibility to set amount of Reflected Power during Power Delivery Test
- #4283: Driver: Milmega 80RF1000-175 Amplifier
- #4268: Driver: wrong frequency range Agilent N5181A-503
- #4265: Implementing ESPC driver with option B3
- #4243: Wrong step size (rounding) in MB
- #4193: Issue auto perform CS114
- #4189: Show limit curve on graph during Immunity tests
- #4188: Performing RS101 susceptibility test described in MILSTD F
- #4187: Control of a 3 axis antenna system from a R&S receiver
- #4183: Driver for R&S ESR
- #4176: Driver: AR PM2003
- #4168: RadiSwitch problem during initialisation
- #4154: Report generator crashes when a single band emission graph is included
- #4149: Report generator error 91
- #4148: Driver: AR 5000A225
- #4135: Wrong forward power measured with NRVD
- #4099: INNCO 2000 that only controls the polarization
- #4086: TDEMI driver with option for multisampling
- #4058 Driver: Luthi CDN L-801 AF4
- #544: Include RI and CI manual mode directly in main menu