Maturo FCU: Difference between revisions

From RadiWiki
Jump to navigation Jump to search
(Updated DeviceDriverInfo template)
(Updated DeviceDriverInfo template)
Line 2: Line 2:
|DLLFile=RADATTT.DLL
|DLLFile=RADATTT.DLL
|DeviceBrand=Maturo
|DeviceBrand=Maturo
|DeviceDriverName=MATUROFCUAT
|DeviceDriverName=MATUROFCUCM
|DeviceType=FCU
|DeviceType=FCU
|HideAutoData=1
|HideAutoData=1
|SupportedDeviceTypes=131072
|SupportedDeviceTypes=4194304
}}
}}



Revision as of 11:57, 18 March 2020

The Maturo FCU device driver is a Positioner which is supported by RadiMation®.  

  • Device needs a raw socket connection
  • Device needs VISA installed (To support raw socket connection)
  • The software of maturo needs to run in the background and needs to be referenced

VISA RAW socket.png

What is raw socket?

NI VISA supports two ways of setting up a network connection. If the device supports TCP-IP intrument protocol known as VXI-11 you can use the following format (INSTR)

TCPIP[board]::host address[::hostname][::INSTR]

If it does not support VXI-11 the manufacturer has chosen a different protocol to communicate. This will be stated in the manual. To be able to connect to a device not supporting VXI-11 you need to use the following format (SOCKET)

TCPIP[board]::host address[::host name]::port::SOCKET

[1]