RadiMation Error: 536872035

No LISN Line is selected

This error is raised during the configuration of a Conducted Emission LISN TSF, when the 'Start Test' button is pressed and no detectors are selected for the LISN Line.

Solution

• It is necessary for this test that at least one check box (Neutral, Line 1, Line 2 or Line 3) is active. Also in case no real LISN is used during the test. Selecting one (or more) of the detectors will then only change the label of the graph line, but will not have any influence on the performed test.

Line Impedance Stabilisation Network

Test Setup File