RadiMation Error: 805309421

From RadiWiki
Revision as of 14:01, 22 June 2022 by Joro (talk | contribs)
Jump to navigation Jump to search

The start or stop frequency has changed after changing the preamplifier. Please check if the frequency range is allowed in combination with the preamplifier setting

A check is done during the activation or deactivation of the preamplifier. During this check, changes in the configured start and stop frequency are detected. It very often is an indication that if the preamplifier is activated, and the start or stop frequency is adjusted, that the preamplifier is limiting the usable frequency range.

This error is raised when it is detected that the start or stop frequency is changed when activating or deactivating the preamplifier.

Solution

  • Check the manual or data sheet of the used spectrum analyser or (scanning) receiver, to determine the usable frequency range of the preamplifier.
  • Do not configure a frequency range in the emission test that is (partially) outside the usable frequency range of the preamplifier
  • Create two different bands in the multiband emission test. One for the band outside of the usable frequency range of the preamplifier, which does not use the preamplifier. A second band can be configured for the frequency range that is usable for the preamplifier, and this band can be configured to use the preamplifier.