Maturo FCU

From RadiWiki
Revision as of 15:40, 17 March 2020 by DevicesBot (talk | contribs) (Updated DeviceDriverInfo template)
Jump to navigation Jump to search

The Maturo FCU device driver is a Turn Table which is supported by RadiMation®.  

  • Device needs a raw socket connection
  • Device needs VISA installed (To support raw socket connection)
  • The software of maturo needs to run in the background and needs to be referenced

VISA RAW socket.png

What is raw socket?

NI VISA supports two ways of setting up a network connection. If the device supports TCP-IP intrument protocol known as VXI-11 you can use the following format (INSTR)

TCPIP[board]::host address[::hostname][::INSTR]

If it does not support VXI-11 the manufacturer has chosen a different protocol to communicate. This will be stated in the manual. To be able to connect to a device not supporting VXI-11 you need to use the following format (SOCKET)

TCPIP[board]::host address[::host name]::port::SOCKET

[1]