Release Notes/Solved items Version 5.4.2
Jump to navigation
Jump to search
RadiMation version 5.4.2[edit]
- #1959: Software needs a long time to start, due to initialization of not connected amplifiers
- #2570: EMR200 only working up to 3 GHz instead 18 GHz
- #2594: Sieple driver for turn table and antenna tower is crashing at de-init of the test
- #2723: Drivers.exe does not check if RadiMation is still running.
- #2744: ESMI driver is generating an error that the srq is raised by another device during the init of the device
- #2769: Crash when sending command to gigatronic 8541C device
- #2783: Driver: Switch matrix for install Savonia
- #2844: configuration window of the HP 34401A is showing the wrong max values
- #2916: Radimation crashes with two R&S Z91 USB Power heads
- #2930: limit line does not show during the merge function
- #2940: Driver: Atenna drivers for install Rational Landsberg
- #2941: Driver: Antenna tower + turn table controller
- #2951: Radiated Emission Manual Mode (Multi Band) division by zero run-time error
- #2963: Crash when the R&S ESHS30 receiver is initialized
- #2985: Deleting a test from the EUT window raises errors that the test cannot be renamed
- #2988: A sequence of CE measurements crashes
- #2990: The surge/esd/eft tabs do not change when you open another tsf file
- #2991: opening another tsf file does not trigger a save function of the current document
- #3004: HI 4422 device driver crashes, when it is being initialized
- #3005: Error message is giving wrong device in bci subst test, antenna instead of injection device
- #3010: R & S SMY 01 embedded version 1.10
- #3012: the mode of operation is not inserted in the multi band emission test print out
- #3015: overrange of RadiPower is not detected correctly
- #3016: It is not possible to not use the polarization function of a RadiTower controller
- #3021: CARAD Driver is missing the probe information
- #3024: Settings.ini warning should be removed for win2K and up
- #3036: PMM 9030 driver has problems during the init of the device.
- #3042: Clicking Combo box in the Test site leaves the combo box empty
- #3058: HP 437B is not going up till 18 GHz.
- #3065: Why isn't average field data supplied during field probe calibration (X,Y & Z axis measurements are) at D.A.R.E!! Calibrations? What does Radimation require for calibration data?
- #3066: driver for LeCroy 9310AL
- #3069: Control of the turntable is not working correctly
- #3071: On emissions graph it reads dBuV and not dBuV/m depending on radiated or conducted
- #3075: When a frequency has been re-measured the result is shown graphically on the plot with what appear to be a higher resolution
- #3105: MySQL ODBC driver version 3.51 is not working correctly with RadiMation