Testlevel calculated current limit
Jump to navigation
Jump to search
Limit: Calculated current[edit]
 Description
|
A field to enter a description for the calibrated current substitution method being configured. |
| Calibration File
|
A field to specify the calibration file path, which defines calibration settings for the current test level. |
| Test Level
|
Section to configure the current test level for the test. |
| Constant Current
|
A test level option where the current is kept constant at a specified level, e.g., 50 mA. |
| Variable Current
|
An option to set a range or variable current level for testing, allowing dynamic adjustments during the test. |
| Calibrated Power
|
An option to set a calibrated power level for testing, which might be disabled if not applicable in the specific test configuration. |
| Signal Gen. Level (Pin)
|
A power method that uses the signal generator level (Pin) as the reference for current measurement. |
| Forward Power (Pfwd)
|
A power method that uses the forward power (Pfwd) as the reference for current measurement. |
| Net-Power (Pfwd - Prev)
|
A power method that calculates net power by subtracting the previous power level (Prev) from the forward power (Pfwd). |
| Tolerance
|
A field to set a tolerance level for current measurement in dB, defining the acceptable variation range for the current test. For example, it could be set to 0.3 dB. |