Release Notes/Solved items Version 2024.2
Jump to navigation
Jump to search
RadiMation version 2024.2.5[edit]
- #15034: Add option to disable automatical log-in of engineers
- #15257: Multiple measurement of the Keysight 34400-series multimeter are performed during the dwell time
- #15282: Improvements related to sharing of device stream run time configurations
- #15458: Improvements related to sharing of device stream run time configurations
- #15658: Fix N9038A raises error about SYST:PRES:FULL
- #15704: Add Ametek GTEM cell drivers
- #15756: Fix the correction file contains the column 'Attenuation' which is not allowed'
- #15796: Option to ignore connection errors when Netatmo is unavailable
- #15798: Driver: Modulation source Agilent 33511B
- #15816: Switch commands for the R&S OSP are retransmitted when an error is raised
- #15825: Show 'RadiMation 30 years' logo's on about window
- #15826: Fix TESEQ CBA 1G-300D reboots when initialised
- #15832: UCS 500N Set the nominal and reduced voltage using U- commands
- #15836: Fix FC06.1 times out after activating the tilt mode
- #15839: Updated documentation regarding usage of magnetic field antenna factor
- #15851: Edit sequence button is working again
- #15854: CWS 500N1 device driver function not implemented
- #15855: Extend Lumiloop 1.2 driver with multi axis readout functionality
- #15859: Fix index out of bounds error when pasting correction data from excel
- #15865: Updated wiki page for the "Timeout while waiting on a response that matches with the regular expression" error
- #15878: KEYSIGHT MSOX3034T select the correct channel
- #15886: Improve communication with ETS-Lindgren amplifiers
- #15983: Limit frequency to the AC/DC coupling start frequency
- #15902: Correct error handling for getinfo call for the the XYZ postioner
- #15903: innco CO2000 and CO3000 auto detection
- #15905: Powering of RS232 devices using the DTR line is now allowed by the RadiVISA layer
- #15906: HP34465A cache the max, min and last value correctly
- #15938: An item with the same key has already been added
- #15950: Driver: Rohde & Schwarz ESU/ESR/ESW/EPL Controlled LISN
- #15952: Add reseller: EM Test Solution
- #15956: AC/DC coupling selection in ESCI scanning receiver
- #15959: Driver: IFI SCCX750
- #16098: CWS500N1.3 Show errors like RR,41 when adjusting the carrier level
RadiMation version 2024.2.4[edit]
- #13537: When saving files fewer intermediate temporary files are created and then deleted again.
- #14954: The problem of temporary files not inserted in Microsoft Excel reports is resolved, also now xlsm files can be included
- #15460: Datadebugger shows multiple Identifiers combined in eachother in the datastorage elements
- #15558: Driver: Turntable driver for the AVL Dynamometer
- #15665: The 'Save as' menu for a new TSF file now loads much faster when there are many directories and files.
- #15713: Image files are correctly inserted in Microsoft Excel reports
- #15782: Start frequency of the Teseq UPA 6109 is now set as 200 MHz
RadiMation version 2024.2.3[edit]
- #14383: Add Driver: PMM ER8000/01
- #14602: Driver: Netatmo module, to retrieve temperature, humidity and pressure from Netatmo devices
- #15286: Fixed an issue where opening test results could hang due to a deadlock
- #15433: Export of closed loop field to a calibration file, does not generate 3x more calibration files than expected
- #15481: Calibration file name combiner does not duplicates the amount of initial created files if the name field is changed
- #15500: Pevent that MatchesString causes a crash in Microsoft - STL - xmemory
- #15502: Improved stability when multiple RadiSense devices are controlled in parallel
- #15511: Add reseller: ProMet
- #15528: Cryptographic library updated to latest version
- #15563: Fix UpdateDriverListOnWiki fails due to invalid character in devices.dat
- #15564: Improved automatic refreshing of Netatmo access token
- #15566: 'General test information retriever' settings are stored in the correct section
- #15571: Connecting to RadiPower RPR2006P does not take 60 seconds anymore
- #15597: Stopping of the test results in power output before stopping
- #15619: Detected USB device stream identifier number is updated in the identifier textbox
- #15628: Updated to the latest Microsoft C++ compiler
- #15629: Updated to the Microsoft C++ 14.42.34433 runtime
- #15631: Update InnoSetup to 6.4.1
- #15636: Build wxWidgets using the C++ 20 compiler
- #15703: Updated documentation and explanation of the GAUSS INSTRUMENTS TDEMI driver
RadiMation version 2024.2.2[edit]
- #15485: Customized printout template with extension other than word documents are working again
- #15503: Multiple report generator codes with digit only content are not converted into a single numeric value in Microsoft Excel anymore
- #15531: If skip unknown mainkeywords is activated, a known and available test is not detected as unknown anymore
RadiMation version 2024.2.1[edit]
- #3410: Multiple TSF files can be selected at once to be added to a sequence
- #4637: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #5552: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #8304: Multiple TSF files can be selected at once to be added to a sequence
- #9475: Multiple TSF files can be selected at once to be added to a sequence
- #10948: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #12806: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #13366: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #14078: Graphlines are shown for a band, also if the actual tested frequencies are not matching with the band start-stop frequency range
- #14285: Graphlines are shown for a band, also if the actual tested frequencies are not matching with the band start-stop frequency range
- #14428: ESR7 Changes RBW from 9 to 10 kHz when measuring PK+AVG or AVG
- #14441: Last selected TSF directory is remembered when 'adding' a test to a sequence
- #14454: Multiple TSF files can be selected at once to be added to a sequence
- #14490: A device driver can be duplicated using the 'Duplicate' button on the device driver configuration window
- #14640: Multiply value in EUT monitoring input can be set more accurate than 0.001
- #14745: Upgrade dotnet framework dependency to 4.8
- #14780: Invalid characters are not used anymore in RadiWiki page names
- #14791: Support for transparent colours
- #14798: Drop down button is shown for the selection of the line style in the graph customization
- #15109: Restart RadiMation after updating the driver using the update checker
- #15209: Allowed deviation for reverberation chamber according IEC 61000-4-21:2011 is provided
- #15272: Add macro to skip all unfound keyword in report generator
- #15358: Raditeq RPR4006R powermeter can also be used in combination with RadiBCI card
- #15422: Driver: Teseq CBA 6G-100D