Configurable Modulation Source

From RadiWiki
Revision as of 10:19, 21 August 2009 by Jewe (talk | contribs)
Jump to navigation Jump to search

Configurable Modulation Source

Configurable Modulation Source Init and Check tab.png

ScreenElementDescription.svg Reset Command to be send to the device to reset the device. Leave blank if you do not want to reset the device.
ScreenElementDescription.svg Init Command to be send to the device to initialize the device. Leave blank if you do not want to initialize the device.
ScreenElementDescription.svg Get ID Command to be send to the device to get the identification from the device. Leave blank if you do not want to verify if the device is connected. If you do not use the verify, RadiMation® will not raise an error when a device is not connected during the initialization of a test.
ScreenElementDescription.svg Returned ID The complete or a part of the return string from the device. The string is compared and when found the check will return that the device is connected.

Configurable Modulation Source Carrier tab.png

Configurable Modulation Source Waveform tab.png

Retrieved from "https://wiki.radimation.com/wiki/index.php?title=Configurable_Modulation_Source&oldid=10531"