Release Notes/Solved items Version 2014.1
Jump to navigation
Jump to search
RadiMation version 2014.1.6[edit]
- #284: Make it possible that files can be dragged and dropped from the windows explorer to RadiMation
- #2354: ISO standards do not require that all raw data is stored
- #2700: Limit line is loosing the configured color
- #2751: Limit line files turn black after setting the colors
- #4458: peak detection is not working properly
- #4520: Dragging a valid RadiMation file should open it
- #4567: Measured frequencies are not corresponding with ESBI
- #4708: EUT is only opening RadiMation and not the file
- #4709: EUT file should open latest RadiMation version installed
- #4735: 4446A preselector is searched when deselected in driver settings
- #4799: Driver ESAI Tracking Generator
- #5093: Creating a new Limit Line is not shown in graph
- #5096: RS ESAI Analyser Input 2 Timeout while waiting for *OPC command
- #5097: Changing LLF style is not updated in graph
- #5158: LLF color is not retained
- #5173: Generate a maximum trace, when more than one trace is taken. We need only the maximum value
- #5263: Driver Bonn BLMA 0832-270D
- #5267: EMCO 1090 is not working
- #5279: Driver AD Agilent 34972A (DAQ)
- #5295: Multiple peaks are detected on almost the same frequency
- #5298: Add LAN communication for Agilent N5171B Signal generator
- #5301: RF Amplifier device not connected
- #5302: RF Amplifier Not all bytes are written (..) within the timeout
- #5332: Automatic peak detection performed in manual mode is not working
- #5336: Driver Agilent 34902A switch matrix 16x relay
- #5351: NRVS communication issues
- #5352: Configurable Signal Generator doesn't retain frequency range
- #5363: Download of Drivers.exe is marked of being unverified
- #5364: Setting the RBW of the R&S ESMI is not always working correctly
- #5367: Multiple modulation forms during Radiated Immunity test
RadiMation version 2014.1.5[edit]
- #3898: When cancelling an emission measurement the defined values for the final measurement are lost
- #4802: Magnetic Field method can't use TT and AT
- #4899: Peaks detection is not correct after initial sweeps and final peaks are not/wrong measured
- #5150: R&S SMA100A/SMC100A timeout while waiting for OPC command
- #5236: Cannot access a disposed object after closing RadiMation
- #5257: RM is not returning RTT1001B turntable controller motor error
- #5297: Unhandled Exception 'disposed object' for LISN and Merge
- #5299: R&S SMP02 Signal generator -222 Data out of range error
- #5303: RF Amplifier Impossible to get description string (..) Unknown RadiMation error
- #5308: R&S ESU8 timeout expired before OPC
- #5314: RadiMation database table and fields are somethimes not retained
- #5318: CAL file used by TSF is not easily visible
- #5331: ESVS10 performs two scans instead of one
- #5348: When auto trigger mode is selected for a VI Powermeter, it always remains in auto trigger mode
RadiMation version 2014.1.4[edit]
- #4638: Closing test configuration window will open test window
- #5042: Test is starting after closing it
- #5238: Test is opening unwanted windows after closing it
- #5265: Metrohm Turntable device driver
- #5313: Readout of SOPM01/03 is slower
RadiMation version 2014.1.3[edit]
- #2513: Zoom-in factor for frequency detection of peaks > 100
- #4226: Wrong command PMM9030/ PMM9060 to set RBW
- #4255: Driver: strange VBW value is set
- #4703: Still test running or still documents loaded errors without any window opened
- #4776: Closing the 16 point result window using the top-right red cross, is not closing the document
- #5022: Innco CO3000 is started at 100cm instead of 90cm
- #5029: Innco CO3000 tolerance on the movement is not managed
- #5176: Unhandled exception during Uniform Field Area Calculation
- #5206: EUT Compression Calibration Unhandled Exception error
- #5229: Opening Mil Std Magnetic test data is generating an Unhandled exception
- #5231: Multiband Fixed power Unhandled exception Arithmetic operation resulted in an overflow error
- #5232: R&S HCC Not all bytes are written to the GPIB-Board within the timeout period (GPIB:EABO)
- #5270: Peak conservation setting is ignored
- #5290: Update the splash screen logo of EMV to ETS
- #5296: Unhandled Exception 'Object reference not set' for Emission X + k * S
- #5300: Unhandled Exception 'Object reference not set' for Climat Chamber
- #5328: Agilent Technologies N191A powermeter error
RadiMation version 2014.1.2[edit]
- #1387: Auto peak sweeps
- #5192: Increase default zoom-in factor for emission peak zoom-in
- #5193: Continuous measure should use max-hold when turntable and antenna tower are not moving
- #5194: Improve tracking of peaks, during a peak zoom-in
- #5233: Validation BCI reference calibration
- #5264: RPR2006C is not recognised
- #5324: RadiPower RPR2006C not recognized
RadiMation version 2014.1.1[edit]
- #4974: Driver R&S amplifier system BBA100
- #5174: Enable external modulation for HP 8648x Signal generator
- #5175: HP 8116A modulation source
- #5246: Add 'Pre Wait Time' functionality for Levelling and Monitoring measurement settings
- #5247: Driver R&S OSP 120 switch matrix
- #5268: Supporting modulation forms for Agilent N5181B
- #5275: Unhandled exception object reference not set to an instance of an object
- #4449: Setup program shows a lot of Warning dialogs for the installation of uncertified windows drivers
- #4597: Driver for amplifier Prana LT 320 DC
- #4713: Prescan is taking to much time
- #5069: Extend all powermeter device drivers to support the 'Reference frequency' setting
- #5121: Cannot access the file because it is being used by another process
- #5133: Driver R&S SMPD Signal Generator
- #5151: Power sensor during Conducted Immunity Calibration is regulating too low
- #5159: EMCO1050 Swap antenna polarization
- #5164: HI-6100 fieldsensor is not set to isotropic by default
- #5172: Turntable controller overshoot
- #5185: Driver Prana DR220
- #5190: Update FTDI Windows drivers for all DARE equipment
- #5199: Extend all CTR drivers to lock and unlock the equipment
- #5207: Peak and average is far too low after ESMI timeout for OPC
- #5215: R&S ESU8 - EMI error Not all bytes are written to the GPIB-board within the timeout period
- #5217: Driver PMM EP601 not recognized
- #5221: RS ESMI Analyser timeout while waiting OPC
- #5239: HI-6113 fiber-Optic Interface doesn't seem to function properly
- #5244: PMM 9030 setting the input raised an error