Monitoring input channel setup
Jump to navigation
Jump to search
Monitoring input channel setup
General[edit]
This setting window enables the end-user to configure the used AD-Converter during the test.
Settings[edit]
 Description
|
Here can the description of the device entered. |
| Device
|
From the dropdown the used AD-Converter driver can be selected. |
| Channel
|
Based on the selected driver the amount of available channels are shown. In the past only eight channels were allowed. Older devices can still be limited to support a maximum of eight channels. |
| Unit
|
Enter the unit corresponding to the values which will be retrieved from the device. |