Multiband.SafeState.Analyser.SetAttenuation

From RadiWiki
Revision as of 10:17, 7 January 2016 by Joro (talk | contribs) (Created page with 'This advanced option specifies if the attenuation of the Analyser or (Scanning) receiver should be set to a certain value at the end of a test. By d…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This advanced option specifies if the attenuation of the Analyser or (Scanning) receiver should be set to a certain value at the end of a test. By default this option is set to True, and thus activated. The Attenuation that should be can be configured in the Multiband.SafeState.Analyser.Attenuation option.

There are other advanced options available that are related to this advanced option:

Warning-48px.png
 Warning: Any change and/or modification to the advanced options, can result in unexpected results and/or incorrect measurement results. Changes in any advanced option should be verified and checked very carefully!
Retrieved from "https://wiki.radimation.com/wiki/index.php?title=Multiband.SafeState.Analyser.SetAttenuation&oldid=14518"