Release Notes/Solved items Version 2016.1.10

From RadiWiki
Jump to navigation Jump to search

RadiMation version 2016.1.10[edit]

    1. 2533: Power conservation is not clearly described in the user-manual
    2. 3917: Nonexistent peak and wrong final measurement with PMM during conducted emission multiband tests
    3. 4550: Driver: EM-Test Signal generator CWS 500
    4. 4596: Problem with PMM in latest version
    5. 4821: Driver Tektronix 3000 for fixed voltage test
    6. 5989: Driver: emtest CWS500N for IEC61000-4-6
    7. 6328: Driver FSV-3 as powermeter
    8. 6383: Error -222 Data out of range;INP:ATT 50 DB while deinitializing a R&S ESL 6
    9. 6767: Too much reflected power in combination with the RadiField
    10. 6955: Error too much reflected power due to RadiField reflected power value
    11. 7030: Driver: CWS500N2 EMTEST
    12. 7080: Driver: EM test CWS 500N2.2
    13. 7107: Incorrect LimitLine values
    14. 7232: R&S ESI26: Data out of range: 1 Hz RBW during powermeasurement
    15. 7323: Prana MT400 Not all bytes are written to the GPIB-Board within the timeout period
    16. 7324: Prana MT400 Amplifier still in operate
    17. 7325: Prana MT400 Amplifier not always to RF-ON
    18. 7446: Reflected powermeter measurements data is incorrectly shown
    19. 7463: Test duration takes a lot of time as compared with a old software used before
    20. 7505: Frankonia FC 06 Turntable Error -33072 (Invalid target position)
    21. 7508: End frequency is not correctly stored in an attenuation/gain system calibration
    22. 7524: Driver NOVOTRONIK GTS5611 switch matrix
    23. 7525: Driver NOVOTRONIK GTS5601 switch matrix
    24. 7530: Selecting 'AD converter selected in testsite' as monitoring input device is default selecting 'nothing' instead of channel 1 resulting that nothing will be measured
    25. 7553: How to configure default graph log or linear scaling?
    26. 7554: Driver Advanced settings for ESU 40 as a powermeter
    27. 7592: RadiMation does not trigger a GetCurrentStatus after Operate and PowerOff
    28. 7599: Driver: AR FL7218 Field Probe
    29. 7601: RadiPower RPR2006 powermeter Windows device drivers
    30. 7601: RadiPower RPR2006 powermeter Windows device drivers
    31. 7602: Bonn Testsystem
    32. 7605: GPIB-Board is not controller in charge (CIC) GPIB: ECIC
    33. 7607: Shifted Report Generator table
    34. 7615: Does the driver of the Power meter E4417E performs reading of the peak value?
    35. 7620: PI EFT singleband Report generator codes empty
    36. 7648: Missing keywords for EUT calibration Harmonics
    37. 7686: Wrong title above emission plots
    38. 7687: Progress bar in PI MB tests is not visible after second sequence

General Purpose Industrial Bus: A communication system used to 'remote control' test and measurement equipment.

Analog to Digital

Pulsed Immunity

Electrical Fast Transients

Multiband: Tests that allow more flexible test configurations, where multiple bands with different settings can be specified in a single TSF.

Megabyte: 1 million bytes.

Retrieved from "https://wiki.radimation.com/wiki/index.php?title=Release_Notes/Solved_items_Version_2016.1.10&oldid=17302"