Release Notes/Solved items Version 2017.2

RadiMation version 2017.2.7[edit]

#6095: Driver: Bonn Elektronik BTA 0122-3000
#6203: Signal power went too high (-6dBm) during power delivery test with Amplifier Bonn BTA 0122-3000
#8001: Exporting codes with band numbers should be sorted on the start frequency.
#8206: Integrate the french translation
#8215: R&S ESPI 3: Not all bytes are written to the GPIB-Board within the timeout period (GPIB: EABO)
#8694: Missing coupling for NSG3040
#8706: Keysight N5171B Narrow pulse modulation
#8739: Report Generator code infinit loop
#8758: R&S SML Set Carrier level is not checked
#8759: Missing equipment in testsite FieldSensor
#8765: Missing first band in CE MB test
#8771: R&S ESW Input switching
#8846: Driver: RadiLink 8 channel as cable
#8857: Field strength is not reached. Calculation uniform field area.

#7042: Implement disabling of SRQ's for Bonn amplifiers
#8489: RadiLog crashes on Windows 7 SP1 32-bit
#8529: Com already opened with 2 AD Channels
#8551: ETS amplifier from 8000 series cannot be controlled over GPIB
#8650: Warning message on Amplifier screen: RadiMation hangs
#8589: ETS-Lindgren 8100-015 amplifier has additional states
#8617: Possibility to clear multiple graph customizations at once
#8639: Cannot select 0.1 mA current testlevel in MIL-STD Conducted Susceptibility calibration
#8677: More than 1000 MB of RAM usage in a MB emission test since version 2017.2.5
#8682: Flashing band selection
#8683: Supporting the Preamplifier of the new TDEMI X depending on version.
#8684: Object reference RE CHamber peak measurement
#8685: AD Channel colors are the same
#8686: ETS-Lindgren 8000-004 always remains in power-on, and cannot be powered off during closing of RadiMation
#8687: Excel export table shifted.
#8688: Internal/external refference toggle Marconi/IFR 2023
#8689: Note field cannot be larger then 1000 characters.
#8699: ESPI 3 Single trace returns 0
#8710: C# Events Object reference
#8717: HAMEG HMS1010 Undefined header
#8729: Lumiloop Range selection
#8862: Cannot find sensor powermeter in the currently active testsite
#8921: Spectrum Analyser missing in test site

#8653: Singleband emission data cannot be loaded anymore
#8654: Correction is applied twice during final peak measurement in MB GTEM
#8656: MB Emission graphs show a lot of crosses when an ambient line is also used

#5003: Exporting a graphline as limitline and also add it to test itself is not working
#7706: Start and Stop frequency Report generator code behaviour.
#8229: Too much duplicated data is represented in the table
#8440: Source array cannot be assigned to destination array type
#8471: Performing final measurement on peaks during MB GTEM test is changing too often to the X EUT side
#8516: Ambient difference line is not detector specific
#8530: AD Channel 2 times in result table
#8540: Save TSF As Readonly is not working
#8570: After Action from testsite is shown twice
#8571: Also show the 'System Calibration' calibration graphs during the Attenuation/Gain EUT calibration
#8591: Correction files stores values as strings since 2017.1
#8592: Logarithmic interpolation on the value in a correction file should not be allowed for <= 0 values
#8629: Apply column custumization to the report generator
#8651: When a correction file is opened, often the logarithmic value interpolation is automatically selected

#3142: 10 Hz frequency steps not possible with Marconi 2024 signal generator
#6216: Error incorrect step frequency raised while setting should be disabled and not be checked at all
#6217: Stepsize setting is no longer disabled when an Analyser is used
#7798: Performance of the System calibration Attenuation / Gain is still not satisfying
#8062: Outside Points
#8157: Measurement of power with 100 Hz RBW on 2 GHz is not working
#8402: Cell is still kept active when COR is being modified, causing it that the current value is not being saved when using main menu items
#8439: RE Chamber, object reference at closing test finished
#8494: RadiLog error reports are not being send
#8502: Showing the graphs from the Attenuation/Gain system calibration in the EUT Calibration results
#8507: High accuracy cable/attenuation gain measurements
#8509: Error: 'Index was outside the bounds of the array', in the Powermeter Virtual Instrument
#8528: Multiple fixes frmVIBase, frmVIPowerMeter

#7695: R&S ESPC returns error The spectrum analyser is incapable of using the requested span. Correct the frequency settings(s) to within the hardware limits
#8065: Folder Selection improvements
#8159: Add Virtual Instrument window for a cable
#8232: Update the CD Start menu for 2017.2
#8245: VI SpecificSettings control resizes incorrectly
#8260: Device specific paremeters period update
#8261: LED Control in device specific settings