Anritsu MS2601A

Differences with other MS2601

Maximum Displayed Average Noise -120 dBm Maximum Dynamic Range -75 dB Trigger Source External,Internal Trigger Modes Freerun,TTL 2nd IF Input Connector Type BNC(f) Probe Power No External Frequency Reference 10 MHz Noise Source Driver No

	MS2601A	MS2601K
Form Factor	Benchtop	Benchtop
Input Impedance	50 Ohm	75 Ohm
Minimum Frequency	9 kHz	9 kHz
Maximum Frequency	2.2 GHz	2.2 GHz
Zero Span	Yes	Yes
Minimum Span	1 kHz	1 kHz
Maximum Span	2200 MHz	2200 MHz
Minimum Sweep Time	50 ms	50 ms
Maximum Sweep Time	1000 s	1000 s
Minimum Resolution Bandwidth	30 Hz	30 Hz
Maximum Resolution Bandwidth	1 MHz	1 MHz
Resolution Bandwidth Steps	1/3/10	1/3/10
Minimum Video Bandwidth	1 Hz	1 Hz
Maximum Video Bandwidth	100 kHz	100 kHz
Video Bandwidth Steps	1/10/100	1/10/100
Maximum Single-Side-Band Noise	-80 dBc/Hz	-80 dBc/Hz
Maximum Safe AC Input	25 dBm	25 dBm
Maximum DC Input	50 V	100 V

Power expressed in milliWatt in dB values.

• 1 mW = 0 dBm

• 2 mW = 3 dBm

• 100 mW = 20 dBm

• 1 W = 30 dBm

• 100 W = 50 dBm

Decibel

Alternating Current

Direct Current