Release Notes/Solved items Version 2022.3
Jump to navigation
Jump to search
RadiMation version 2022.3.5[edit]
- #11073: Wrong display of "Field 11 V/m AM" for Horizontal RI Test
- #11642: Calibration file of horizontal is also used for vertical polarization of the second band
- #11895: Calculated field calibration file of the first band is used in the calculations of the other configured bands
- #12480: RI multiband measurements (V+H) - Deviation in calculated test level
- #13258: Configuring a multiband test with multiple bands testing on different polarisations result in incorrect measurement results
- #13260: Report generator error 'System.OutOfMemoryException'
- #13308: Relay Unit SC1000 not switching
- #13330: Communication error with LSProbe 2.0
- #13335: Report generator does not replace expected keywords compared to previous versions.
- #13338: The axis of the Lumiloop LSProbe 2.0 are reported in a different order
- #13342: HI 6153 raises error 3
- #13344: Raditeq driver shows ETS identifier in settings.
- #13345: Driver: Keysight U2021XA
- #13348: Driver: ETS 7002-008.
- #13352: RadiMation does not use the correct RBW when performing the final measurement.
- #13355: Rename reseller Nortelco to Adeptor AS
- #13359: Error no average probe is selected
- #13361: Word report: correctly handle text in bullits and headers
- #13363: Report generator does not insert data of a valid keyword when table data is inserted into another table
- #13386: Error while reading binary data from Rigol DSA815.
- #13412: RI multiband .Cal file File does not exist error loading an existing file.
- #13416: Report generator does not insert expected data.
- #13420: End Frequency is too high for the selected equipment
- #13439: Auto detection of Radi-products does not seem to work as expected
RadiMation version 2022.3.4[edit]
- #13331: Opening radiated immunity tests shows the peak table tab while no peaks are detected
- #13321: Report generator outputs table data with a precision of 13 digits
- #13316: Init on AR75A400 amplifier hangs.
- #13315: RTO1024 Data out of range error channel 2
- #13313: Incorrect data transfer for HP 8564EC analyser
- #13290: Increase the size of the correction file selection control to be able to show 5 correction entries
- #13171: Play a tone during the dwelltime
RadiMation version 2022.3.3[edit]
- #13332: communication error R&S ESR and radimation
- #13287: Report generator outputs table data with a precision of 13 digits
- #13253: No RadiWiki page is available for the error message of a RadiCentre
- #13234: Rohde & Schwarz ESR: data out of range settings the measurement time
- #13192: Auto detection of cards in an ETS-Lindgren EMCenter is not working
- #13189: INNCO CO3000 starts rotation to a random angle during the initialisation
- #10997: Include description of all the tabs of the configuration dialog of the RadiPower on the RadiWiki website
- #5934: 2 graph buttons on the Triplate Information window are not working
- #5025: RDM1004B (RadiCentre) probably an unknown RadiMation Error
RadiMation version 2022.3.2[edit]
- #13223: Adding a row in correction file does not show the new row
- #13010: Driver: COM-POWER AMTTC300 (turntable)
- #12947: RadiMation slows down the PC after updating
RadiMation version 2022.3.1[edit]
- #13320: Graph of amplifier compression is not scaled correctly
- #13221: Kan COM-object van het type System.__ComObject niet converteren naar interfacetype DevExpress.Utils.DirectXPaint.ID2D1DeviceContext.
- #13207: mutex error
- #13183: Improve label layout in antenna scan
- #13148: Update DevExpress to 22.1.6
- #13099: Update nuget packages
- #13073: Update DevExpress to 22.1.5
- #12972: Test status of a Conducted emission test is not set to Fail if one or more peaks are failing
- #12909: Generation of report is too slow
- #12649: Possibility to use logarithmic scaling on the Y axis needed for DO-160
- #12279: Limit line with gaps
- #11644: Update Crypto++ to 8.7.0
- #11355: Make it possible to not detect peaks between limit line gaps
- #10772: Treshold is evaluated with the unmodulated signal.
- #4430: Possibility adding 'don't care' ranges in LLF
- #4253: Easy implementing several limit lines CISPR25