Release Notes/Solved items Version 2023.2.5
Jump to navigation
Jump to search
RadiMation version 2023.2.5[edit]
- #13291: Read all trace data when multiple detectors are active for a TDEMI
- #13512: Error of invalid process is not shown anymore after SHIFT+Advanced click
- #13536: Radimation 2022.3.6 crashs after each test when using two dongles.
- #13764: SG386 pulse modulation
- #13813: RadiMation hangs at the end of the test when multiple dongles are connected to the PC
- #13920: Driver request: Stanford Research SG386 RF Signal Generator
- #14005: Rigol RSA series: Additional sweep is taken after QP detector is activated to allow to level to correct amplitude
- #14010: Problem with RadiMation and the polarisation of the Frankonia FC06
- #14064: Rigol RSA series: Additional sweep is taken after QP detector is activated to allow to level to correct amplitude
- #14111: Driver: ETS-Lindgren EMSense 7007-203
- #14117: Apply cable correction to the magnetic field calibration
- #14121: Driver: A-info DS-3100
- #14122: Driver: A-Info LB-OH-650-10-C-SF
- #14123: Driver: A-Info LB-2080-SF
- #14124: Driver: Aeroflex 2025
- #14125: Driver: Agilent Technologies 83731A
- #14126: Driver: A-Info 62EWGS-A1
- #14127: Driver: A-Info 90EWG3.5-T02-A1
- #14128: Driver: EMC Partner ESD3000
- #14130: Driver: Tekbox current probes
- #14131: Driver: Tekbox Bulk current injection devices
- #14133: MCU antenna tower position progress calculation issue
- #14136: Driver: Injection device: Schloeder EMCL-20 and Schloeder EMCL-35
- #14148: High attenuation required for measuring the fundamental results in upper harmonics being measured in the noise.
- #14149: Adjust drivers to use the correct name for A-INFO
- #14154: Rigol DSA832: Additional sweep is taken after QP detector is activated to allow to level to correct amplitude
- #14156: Can HTTP communication be used to retireve information from JSON
- #14160: Rigol DSG3065B does not support SYST:ERR?
- #14161: Textronix AFG3251C reports event messages as errors
- #14166: HI-6105 cannot save settings when pressing the OK button
- #14176: CWS500 as receiver does not work
- #14177: Object reference error opening Graph Export window
- #14186: Error when using RS PRO analyzer as power meter
- #14194: Data returned from Tektronix TDS oscilloscopes are calculated using 10 vertical divisions
- #14194: Improved selection of to be transferred waveform from older Tektronix TDS oscilloscopes
- #14195: Driver: RadiSense RSS2010M
- #14199: HP E4419A cannot be found because the identification string cannot be changed
- #14201: EMSense 7007-203 drivers
- #14218: Wrong settings are sent to the VDI device
- #14223: HP E4419A dual power meter error during zero operation
- #14224: Process (PID number) not found after closing Notepad
- #14225: Frankonia FC06.1 wait after height change to finish INIT procedure
- #14226: Manual EFT configuration does not indicate the unit in which configured values are expressed
- #14229: Driver: Tekbox TBMA4
- #14230: Driver: Tekbox TBL 5032-3
- #14232: Driver: Kalmus 320 FC
- #14233: Driver: Kalmus 711-FC-CE
- #14234: Driver: Teseq T800
- #14235: Driver: FCC-801-M2-50A
- #14236: Driver: FCC-801-M3-16A
- #14237: Driver: FCC-801-M5-16A
- #14238: Driver: EM Test ESD 30
- #14243: Driver: Prana N-MT500DC
- #14245: Magnetic field test according ISO 11452-8 time outs when using the Configurable multimeter driver
- #14251: Adjusted start frequency to 9 kHz of Raditeq GTM0250A, GTM0500A and GTM1000A
- #14255: Powermeter Fail
- #14256: Regulation of initial step of a non linear amplifier is now using the configured default gain
- #14259: HP4418 added option to enable the step detector and send the sense speed
- #14261: Raise error if the selected filter setting is not allowed for current RadiPower firmware
- #14262: Driver: Hameg 8135
- #14263: R&S SMH Allow configuring of 10kHz-2GHz range
- #14265: Standard socket port of the Rigol RSA-series is port 5555
- #14267: Fix Strange layout of stirrer configuration panel
- #14268: Select tuned mode as the default stirrer type
- #14275: Driver: Boonton 4220 powermeter
- #14287: Driver: IFI T188-50
- #14288: Driver: Klein+Hummel SA602 amplifier
- #14289: Driver: OPHIR RF 5041