DARE!! Instruments RSW2002E

From RadiWiki
Revision as of 11:05, 9 January 2024 by Joro (talk | contribs)
Jump to: navigation, search

The DARE!! Instruments RSW2002E device driver is a Switch Matrix which is supported by RadiMation®.

Switch configuration

RSW2002E Switch settings.png

ScreenElementDescription.png During and After

There are two switch configurations. These two configurations are during and after the test. The setting during the test is send to the switch matrix just before the test is started. The setting after is send to the switch matrix after the test has ended. The idea behind it is that the setting during and after the test can be completely different. A possible situation is that the input of the analyser needs to be switch from the antenna, after the test has ended, to be sure that it is not blown up. Another possible scenario is that the high power amplifier is switched to a dummy load to be sure there is no RF power in the chamber. It is also possible to not switch at all with the option 'Do not change'

Retrieved from "https://wiki.radimation.com/wiki/index.php?title=DARE!!_Instruments_RSW2002E&oldid=99752"