ISetting values

RadiMation^® is internally using an enumeration to define specific test parameters. The values of this enumeration are also used in several advanced options.

The table below will give a description of all the possible ISetting values, and the corresponding test parameter

enumeration value name	value	description
radestSettings	1	Settings array
radestBand	2	Band Settings array
radestStartStopFrequency	3	A start and stop frequency
radestReferenceLevel	4	Reference level
radestVBW	5	VBW for emission tests
radestRBW	6	RBW for emission tests
radestModulation	7	Modulation settings
radestUnits	8	Units
radestOperationMode	9	Manual Mode Operation Mode
radestTestSite	10	Test-site with sub-settings
radestDevice	11	Used measurement device
radestLoadedDevices	12	A caching-ISetting object to 'maintain' a cache of the loaded objects
radestCenterFrequency	13	Center Frequency
radestSpan	14	Span
radestStartTime	15	Start Time (of Test, Sweep, dwell-time)
radestStopTime	16	Stop Time (of Test, Sweep, dwell-time)
radestSweepNumber	17	Sweep Number
radestCorrectionID	18	ID of the corrections to use
radestPeakIdentifier	19	Unique Peak Identifier (number)
radestSelectedPeak	20	Selected peak identifier (number)
radestStepFrequency	21	Step frequency for emission tests
radestTraceDetector	22	List of all detectors used for Traces
radestAttenuation	23	Attenuation of a receiver
radestSweepTime	24	Sweeptime of an analyser
radestMeasureTime	25	Measuretime of a (scanning) receiver
radestPreAmplification	26	Pre-amplification of the analyzer
radestAntennaDistance	27	Distance of the antenna
radestAntennaHeight	28	Height of the antenna
radestAntennaPolarization	29	Antenna polarization
radestTurnTableAngle	30	Turntable angle
radestNumberOfSweeps	31	The number of sweeps to take in a certain band
radestNumberOfPeaks	32	The number of peaks to detect in a certain band
radestBandSelected	33	If a band is selected or not
radestBandColor	34	The color to show for the band
radestGraphScaleMode	35	Graph scale mode (Lineair/Logarithmic)
radestGraphScaling	36	Graph Scaling (auto or fixed to a value, for the bottom and the top of the graph)
radestLimitLine	37	one single Limit line
radestBandDone	38	Maintains information if a band is already tested (done) or not
radestGraphColor_NOT_USED_ANYMORE	39	Color of a graph element (Is not used anymore)
radestGraphLineStyle	40	Style of the line of a graph element
radestGraphMarkerStyle	41	Style of the marker of a graph element
radestPeakDetector	42	Detectors that are used to measure a peak
radestDetectorMeasureTime	43	Measure time of a detector measuring a peak
radestDetectorObservationTime	44	Observation time of a detector measuring a peak
radestLogarithmicAmplifier	45	Logarithmic amplifier of the receiver/spectrum analyser
radestDetectorMeasurement	46	The results of the last detector measurement
radestAntennaHeightMovement	47	Movement of the height of the antenna tower
radestTurnTableAngleMovement	48	Movement of the angle of the turntable
radestEUTAngle	49	The angle of the EUT that is measured (doesn't need to be the same as the Turntable angle)
radestEUTAngleOffset	50	The offset between the turntable angle and the EUT angle
radestFormattableRequestType	51	The type of request that is asked to the IFormattableData objects
radestFormattableRequestLevel	52	The level of request that is asked to the IFormattableData objects
radestCorrectionManager	53	CorrectionManager
radestChangeOrder	54	The order in which the settings need to be changed
radestAngleOptimization	55	Settings for finding the optimized angle of a peak
radestHeightOptimization	56	Settings for finding the optimized height of a peak
radestDeviceCapability	57	Data that describes the capability of a device (driver)
radestVirtualLimitOffset	58	The virtual limit line offset
radestDataStorage	59	Data Storage Array setting
radestAbsoluteTime	60	An absolute time stamp setting
radestCarrierFrequency	61	The carrier frequency of the signal generator, and thus for all immunity tests
radestCouplerAttenuationForward	62	The forward power attenuation of the coupler
radestCouplerAttenuationReflected	63	The reflected power attenuation of the coupler
radestDwellTime	64	The dwelltime during immunity tests
radestFrequencyStepper	65	The Frequency stepper that is used for calculating the frequency stepsize in immunity tests
radestITestLevel	66	The ISetting object is an ITestLevel and also has that interface implemented
radestCarrierState	67	The state of the carrier. If the carrier of the signal generator is turned on or off
radestFrequencyChangeMode	68	The mode that is used to change from a frequency to another frequency
radestStartOfDwellTime	69	An identifier for the 'Action in Time' setting, to mark the begin of the dwell time
radestEndOfDwellTime	70	An identifier for the 'Action in Time' setting, to mark the end of the dwell time
radestStartOfPowerRegulation	71	An identifier for the 'Action in Time' setting, to mark the begin of the power regulation
radestStartOfPowerRegulationDown	72	An identifier for the 'Action in Time' setting, to mark the begin of the power regulation down. This action can be used by graphs to prevent the update of the achieved power levels.
radestCustomizations	73	All kind of customization settings
radestUse	74	A boolean state to remember if certain option is USEd (activated/deactivated etc...)
radestGraphgridStyle	75	Style of the grid of a graph
radestMonitoringInput	76	The information of a monitoring input.
radestReRegulate	77	Information over reregulation of the test-level
radestLISNLine	78	List of selected LISN lines
radestLocationType	79	The type of 'location' on which the EUT is measured
radestEvent	80	An (textual) event, that is part of the 'event-log'
radestGrid	81	The customization and configuration of a grid
radestAttachment	82	A file attachment
radestXYCoordinate	83	A setting to store an (X,Y) coordinate, for example to remember the position of a window
radestSize	84	A setting to store a (width, height) size, for example to remember the size of a window
radestSweepDirection	85	The direction for (frequency) sweeping (forward or backwards).
radestSorting	86	The sorting of a table, which column and inverted or not.
radestMaximumSelectedPeaks	87	The maximum number of simultaneously selected peaks
radestPrintReport	88	print the report after the report generation has been completed.
radestEditReport	89	edit the report after the report generation has been completed.
radestShowAdvanced	90	show the advanced window in the report Generator window
radestGraphStartStopFrequency	91	The start and stop frequency as it is shown in the frequency graph
radestLinkGraphSpanCenter	92	If the start and stop frequency of the graph are linked to the currently used span and center
radestPeakDiscrimination	93	The type of peak discrimination that should be used
radestPeakType	94	The peak type that is detected for a specific peak