Difference between revisions of "Maturo FCU"
DevicesBot (talk | contribs) (Updated DeviceDriverInfo template) |
|||
| Line 24: | Line 24: | ||
TCPIP[board]::host address[::host name]::port::SOCKET | TCPIP[board]::host address[::host name]::port::SOCKET | ||
| − | [https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019KsUSAU&l=nl-NL] | + | [https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019KsUSAU&l=nl-NL See National Instruments example] |
Revision as of 10:42, 7 July 2020
The Maturo FCU device driver is a Turn Table, Antenna Tower, Positioner which is supported by RadiMation®.
- Device needs a raw socket connection
- Device needs VISA installed (To support raw socket connection)
- The software of maturo needs to run in the background and needs to be referenced
What is raw socket?
NI VISA supports two ways of setting up a network connection. If the device supports TCP-IP intrument protocol known as VXI-11 you can use the following format (INSTR)
TCPIP[board]::host address[::hostname][::INSTR]
If it does not support VXI-11 the manufacturer has chosen a different protocol to communicate. This will be stated in the manual. To be able to connect to a device not supporting VXI-11 you need to use the following format (SOCKET)
TCPIP[board]::host address[::host name]::port::SOCKET
