Monitoring input channel setup
Monitoring input channel setup
Contents
General
The Monitoring input channel setup window can be opened by opening a new or existing EUT file:
Then select the 'Monitoring input channels' panel. This window enables the end-user to configure the used AD-Converter during the test:
Settings
Description | Enter the description of the device. E.g. use the brand and/or identification number. |
Device | From the dropdown the used AD-Converter driver can be selected. |
Unit | Enter the unit corresponding to the values which will be retrieved from the device. |
Calculation
None | RadiMation will not apply any additional calculations to the value the device driver is returning. |
Offset | RadiMation will additionally apply the specified offset to the retrieved value by the device driver. |
Multiply | RadiMation will additionally apply the specified multiply factor to the retrieved value by the device driver. |
AD input range | RadiMation will not apply any additional calculations to the value the device driver is returning. |
Formula y(x) | RadiMation will additionally apply the specified formula to the retrieved value by the device driver. |
It is needed to match the expected value with the retrieved value by the device driver. Especially for older device driver it is needed to specify the allowed value range of the device.