Difference between revisions of "RadiMationInterface.can"
m |
|||
| Line 4: | Line 4: | ||
You can download the file [[media:RadiMationInterface.zip|here]] | You can download the file [[media:RadiMationInterface.zip|here]] | ||
| + | |||
| + | = Explanation of available events/functions = | ||
| + | ==Test_Frequency== | ||
| + | The current frequency of the test, in other words the frequency of the signal generator. | ||
| + | |||
| + | '''Parameter:''' mdFreqMHz | ||
| + | |||
| + | '''Unit parameter:''' MHz | ||
| + | ==Test_Carrier_Level== | ||
| + | The carrier level of the signal generator | ||
| + | |||
| + | '''Parameter:''' mdPowerIndBm | ||
| + | |||
| + | '''Unit parameter:''' dBm | ||
| + | ==Test_Forward_Power== | ||
| + | ==Test_Reflected_Power== | ||
| + | ==Test_Average_Field== | ||
| + | ==Test_Calculated_Field== | ||
| + | ==Test_Measured_Current== | ||
| + | ==Test_Sensor_Power== | ||
| + | ==Test_Amplitude_Modulation_Internal== | ||
| + | ==Test_Amplitude_Modulation_External== | ||
| + | ==Test_Frequency_Modulation_Internal== | ||
| + | ==Test_Frequency_Modulation_External== | ||
| + | ==Test_Pulse_Modulation_Internal== | ||
| + | ==Test_Pulse_Modulation_External== | ||
| + | ==Test_Modulation_On== | ||
| + | ==Test_Modulation_Off== | ||
| + | ==Antenna_Movement_Started== | ||
| + | ==Antenna_Movement_Stopped== | ||
| + | ==Antenna_Movement_Percentage== | ||
| + | ==Antenna_Movement_Changing_Polarisation== | ||
| + | ==TurnTable_Movement_Started== | ||
| + | ==TurnTable_Movement_Stopped== | ||
| + | ==TurnTable_Movement_Turning_Percentage== | ||
Revision as of 08:40, 28 October 2010
The RadiMationInterface.can is an interface between the RadiMation software and CANoe and CANalyser.
By inserting this file inside your CANoe/CANalyser project you are able to extract information from RadiMation using CANoe/CANalyser.
You can download the file here
Contents
- 1 Explanation of available events/functions
- 1.1 Test_Frequency
- 1.2 Test_Carrier_Level
- 1.3 Test_Forward_Power
- 1.4 Test_Reflected_Power
- 1.5 Test_Average_Field
- 1.6 Test_Calculated_Field
- 1.7 Test_Measured_Current
- 1.8 Test_Sensor_Power
- 1.9 Test_Amplitude_Modulation_Internal
- 1.10 Test_Amplitude_Modulation_External
- 1.11 Test_Frequency_Modulation_Internal
- 1.12 Test_Frequency_Modulation_External
- 1.13 Test_Pulse_Modulation_Internal
- 1.14 Test_Pulse_Modulation_External
- 1.15 Test_Modulation_On
- 1.16 Test_Modulation_Off
- 1.17 Antenna_Movement_Started
- 1.18 Antenna_Movement_Stopped
- 1.19 Antenna_Movement_Percentage
- 1.20 Antenna_Movement_Changing_Polarisation
- 1.21 TurnTable_Movement_Started
- 1.22 TurnTable_Movement_Stopped
- 1.23 TurnTable_Movement_Turning_Percentage
Explanation of available events/functions
Test_Frequency
The current frequency of the test, in other words the frequency of the signal generator.
Parameter: mdFreqMHz
Unit parameter: MHz
Test_Carrier_Level
The carrier level of the signal generator
Parameter: mdPowerIndBm
Unit parameter: dBm
