Difference between revisions of "RadiMationInterface.can"
(→Explanation of available events/functions) |
(→Explanation of available events/functions) |
||
| Line 51: | Line 51: | ||
==Test_Pulse_Modulation_External== | ==Test_Pulse_Modulation_External== | ||
==Test_Modulation_On== | ==Test_Modulation_On== | ||
| + | The currently configured modulation is turned on. | ||
==Test_Modulation_Off== | ==Test_Modulation_Off== | ||
| + | The modulation is turned off. | ||
==Antenna_Movement_Started== | ==Antenna_Movement_Started== | ||
Starting of the movement of the antenna tower with the target position of the antenna tower. | Starting of the movement of the antenna tower with the target position of the antenna tower. | ||
| Line 71: | Line 73: | ||
'''Unit parameter:''' % | '''Unit parameter:''' % | ||
==Antenna_Movement_Changing_Polarisation== | ==Antenna_Movement_Changing_Polarisation== | ||
| + | Changing the antenna polarisation. | ||
| + | |||
| + | '''Parameter:''' target | ||
| + | |||
| + | '''Unit parameter:''' unitless | ||
| + | |||
| + | When the target is 1 the antenna is changed to horizontal. | ||
| + | |||
| + | When the target is 2 the antenna is changed to vertical. | ||
==TurnTable_Movement_Started== | ==TurnTable_Movement_Started== | ||
Starting of the movement of the turn table with the target position of the turn table. | Starting of the movement of the turn table with the target position of the turn table. | ||
Revision as of 09:24, 28 October 2010
The RadiMationInterface.can is an interface between the RadiMation software and CANoe and CANalyser.
By inserting this file inside your CANoe/CANalyser project you are able to extract information from RadiMation using CANoe/CANalyser.
You can download the file here
Contents
- 1 Explanation of available events/functions
- 1.1 Test_Frequency
- 1.2 Test_Carrier_Level
- 1.3 Test_Forward_Power
- 1.4 Test_Reflected_Power
- 1.5 Test_Average_Field
- 1.6 Test_Calculated_Field
- 1.7 Test_Measured_Current
- 1.8 Test_Sensor_Power
- 1.9 Test_Amplitude_Modulation_Internal
- 1.10 Test_Amplitude_Modulation_External
- 1.11 Test_Frequency_Modulation_Internal
- 1.12 Test_Frequency_Modulation_External
- 1.13 Test_Pulse_Modulation_Internal
- 1.14 Test_Pulse_Modulation_External
- 1.15 Test_Modulation_On
- 1.16 Test_Modulation_Off
- 1.17 Antenna_Movement_Started
- 1.18 Antenna_Movement_Stopped
- 1.19 Antenna_Movement_Percentage
- 1.20 Antenna_Movement_Changing_Polarisation
- 1.21 TurnTable_Movement_Started
- 1.22 TurnTable_Movement_Stopped
- 1.23 TurnTable_Movement_Turning_Percentage
Explanation of available events/functions
Test_Frequency
The current frequency of the test, in other words the frequency of the signal generator.
Parameter: mdFreqMHz
Unit parameter: MHz
Test_Carrier_Level
The carrier level of the signal generator
Parameter: mdPowerIndBm
Unit parameter: dBm
Test_Forward_Power
The measured value of the forward power.
Parameter: mdPowerIndBm
Unit parameter: dBm
Test_Reflected_Power
The measured value of the reflected power.
Parameter: mdPowerIndBm
Unit parameter: dBm
Test_Average_Field
The measured value of the average field.
Parameter: mdFieldVm
Unit parameter: V/m
Test_Calculated_Field
The calculated value of the field based on the calibration file.
Parameter: mdFieldVm
Unit parameter: V/m
Test_Measured_Current
Test_Sensor_Power
Test_Amplitude_Modulation_Internal
Test_Amplitude_Modulation_External
Test_Frequency_Modulation_Internal
Test_Frequency_Modulation_External
Test_Pulse_Modulation_Internal
Test_Pulse_Modulation_External
Test_Modulation_On
The currently configured modulation is turned on.
Test_Modulation_Off
The modulation is turned off.
Antenna_Movement_Started
Starting of the movement of the antenna tower with the target position of the antenna tower.
Parameter: position
Unit parameter: Meter
Antenna_Movement_Stopped
The stop position of the antenna tower.
Parameter: position
Unit parameter: Meter
Antenna_Movement_Percentage
The current percentage of the antenna tower movement from the start position to the end position
Parameter: percentage
Unit parameter: %
Antenna_Movement_Changing_Polarisation
Changing the antenna polarisation.
Parameter: target
Unit parameter: unitless
When the target is 1 the antenna is changed to horizontal.
When the target is 2 the antenna is changed to vertical.
TurnTable_Movement_Started
Starting of the movement of the turn table with the target position of the turn table.
Parameter: position
Unit parameter: Degrees
TurnTable_Movement_Stopped
The stop position of the turn table.
Parameter: position
Unit parameter: Degrees
TurnTable_Movement_Turning_Percentage
The current percentage of the turn table movement from the start position to the end position
Parameter: percentage
Unit parameter: %
