Difference between revisions of "RadiMation Application Note 106"

From RadiWiki
Jump to: navigation, search
(→‎Powermeter parameter configuration)
Line 3: Line 3:
  
 
Each powermeter in [[RadiMation|{{RadiMation}}]] has a powermeter configuration tab in the device drivers.
 
Each powermeter in [[RadiMation|{{RadiMation}}]] has a powermeter configuration tab in the device drivers.
−
In this tab, the accuracy of measured power can be optimized.
+
In this tab, the accuracy of power measurement can be optimized.
−
This function allows to make multiple measurement loop, and wait until the value is stable.
+
This function allows to make multiple measurements, and wait until the value is stable. Using a measurement-loop.
  
  
Line 10: Line 10:
  
  
−
{{ScreenElementDescription|Pre Wait Time|Wait time before starting the multiple measurement loop. Can be used to wait for a signal generator, and or amplifier to stabalize.}}
+
{{ScreenElementDescription|Pre Wait Time|Wait time before starting the measurement-loop. Can be used to wait for a signal generator, and or amplifier to stabalize.}}
−
{{ScreenElementDescription|Measure|The maximum ammount of measure times, for the multiple measurement loop}}
+
{{ScreenElementDescription|Measure|The maximum ammount of measure times, for the measurement-loop}}
−
{{ScreenElementDescription|Wait Time|The wait time before each measurement is taken, during the multiple measurements loop.}}
+
{{ScreenElementDescription|Wait Time|The wait time before each measurement is taken, during the measurement-loop.}}
−
{{ScreenElementDescription|Max. Difference|If the measured power between each measurement in the multiple measurement loop, is less than this value. The measured power is stable. The loop will stop.}}
+
{{ScreenElementDescription|Max. Difference|If the measured power between each measurement in the measurement-loop, is less than this value. The measured power is stable. The loop will stop.}}
  
  
 
The powermeter can be used in the test to regulate signal generator values.
 
The powermeter can be used in the test to regulate signal generator values.
−
 
 
The powermeter can also be used as monitoring input channel.
 
The powermeter can also be used as monitoring input channel.
−
 
 
For each powermeter usage, the multiple measurement loop can be configured.
 
For each powermeter usage, the multiple measurement loop can be configured.
  

Revision as of 14:08, 29 January 2019

Powermeter parameter configuration

This application note describes how the measurement parameters of a Powermeter can be configured to get a fast and stable power measurement.

Each powermeter in RadiMation® has a powermeter configuration tab in the device drivers. In this tab, the accuracy of power measurement can be optimized. This function allows to make multiple measurements, and wait until the value is stable. Using a measurement-loop.


PowerMeterPanel.png


ScreenElementDescription.png Pre Wait Time Wait time before starting the measurement-loop. Can be used to wait for a signal generator, and or amplifier to stabalize.
ScreenElementDescription.png Measure The maximum ammount of measure times, for the measurement-loop
ScreenElementDescription.png Wait Time The wait time before each measurement is taken, during the measurement-loop.
ScreenElementDescription.png Max. Difference If the measured power between each measurement in the measurement-loop, is less than this value. The measured power is stable. The loop will stop.


The powermeter can be used in the test to regulate signal generator values. The powermeter can also be used as monitoring input channel. For each powermeter usage, the multiple measurement loop can be configured.

Retrieved from "https://wiki.radimation.com/wiki/index.php?title=RadiMation_Application_Note_106&oldid=18377"