RadiMation Error: 805309370
Revision as of 07:44, 4 September 2017 by Joro (talk | contribs) (Created page with '= Maximum allowed span (<1> kHz) in FFT mode is exceeded (<2> kHz) = The Rohde & Schwarz ESIB series analyzers can be used in combination with FFT filters. However there are…')
Maximum allowed span (<1> kHz) in FFT mode is exceeded (<2> kHz)
The Rohde & Schwarz ESIB series analyzers can be used in combination with FFT filters. However there are some restrictions on the usable frequency spans, depending on the selected FFT RBW filter. It is now detected that the desired span (shown as <2> kHz in the error message), is wider than the maximum allowed span of the FFT RBW filter (shown as <1> kHz in the error message).
Solution
Possible solutions for this error can be:
- Seperate the test in multiple bands, where the span of the bands is reduced to the suggested maximum allowed span width.
- Increase the RBW to allow for a wider usable frequency span.
- Disable FFT mode for the RBW filter.
