|
|
Line 1: |
Line 1: |
| == RadiMation version 2014.2.1 == | | == RadiMation version 2014.2.1 == |
− |
| |
− | version 2014.1.18
| |
− | --------------
| |
| * #5497: Agilent 4403, Agilent 4408 and Agilent 4411 are limited to 401 sweep points | | * #5497: Agilent 4403, Agilent 4408 and Agilent 4411 are limited to 401 sweep points |
| * #5496: Device driver configuration of the Agilent N9038A shows the sweep points setting twice | | * #5496: Device driver configuration of the Agilent N9038A shows the sweep points setting twice |
Line 26: |
Line 23: |
| * #4100: First sweep from Agilent MXE is sometimes wrong | | * #4100: First sweep from Agilent MXE is sometimes wrong |
| * #4053: Spectrumanalyzer HP4405B driver does not work with version 5.8.25 and above | | * #4053: Spectrumanalyzer HP4405B driver does not work with version 5.8.25 and above |
− |
| |
− | version 2014.1.17
| |
− | --------------
| |
− | * #5489: Could we connect any field sensor when the optic-serial is supported?
| |
− | * #5470: No refresh of TSF files in any directory
| |
− | * #5462: RadiCentre plugin cards not recognized
| |
− | * #5461: Communication issue with R&S ESPI 7
| |
− | * #5460: Communication issue with AD Agilent 34972A (DAQ)
| |
− | * #5459: DeviceStream communication could have wrong termination handling
| |
− | * #5450: RadiMation crash during test with R&S ESU EMI receiver
| |
− | * #5447: Replace all listviews with a grid control
| |
− | * #5435: Power out of range error with R&S SME06
| |
− | * #5395: How to make use of the dBµA unit
| |
− | * #5382: Connecting issue with R&S BBA100
| |
− | * #5286: Current Status window pops up
| |
− | * #5184: Administrator automatically login is not remembered
| |
− | * #4731: Customizing the progress bar and text
| |
− | * #4700: Create new EUT creates error
| |
− | * #4245: Automatically login this engineer doesn't work
| |
− | * #4217: Dongle is not recognized anymore
| |
− | * #3312: Administrator is displayed when when other default user is selected with password
| |
− |
| |
− | version 2014.1.16
| |
− | --------------
| |
− | * #5430: Markers placed on the trace do reflect trace level
| |
− | * #5428: Driver Spectrum Analyzer R&S FSW 43
| |
− | * #5353: Unhandled Exception when saving General Info of test
| |
− | * #4631: Auto create EUT directory
| |
− | * #4417: Wrong sorting of Modified Date
| |
− |
| |
− | version 2014.1.15
| |
− | --------------
| |
− | * #5451: R&S SMB-100 Signal Generator
| |
− | * #5435: Power out of range error with R&S SME06
| |
− | * #5412: Update the manual confirm the latest RadiMation release
| |
− | * #5346: Adding and removing multiple LLF at once
| |
− | * #5000: A restricted engineer isn't allowed to show the information of testsites
| |
− | * #4997: A TSF that is marked as readonly doesn't allow to show the information of the selected testsite
| |
− | * #4163: Pulse modulation does not allow 0.1%, but is needed for Nissan standard
| |
− | * #2931: Text in CI subst can not be read completly because the text box is too small
| |
− | * #2468: MainVoltage vs Mains Voltage
| |
− |
| |
− | version 2014.1.14
| |
− | --------------
| |
− | * #5456: Maturo SCU TurnTable is not moving
| |
− | * #5433: Clicking graph or table information is generating 'Object reference not set to an instance of an object' error
| |
− | * #5432: Autorange FM2000 is switching very often
| |
− | * #5426: Automatic calculation of magnetic field strength results in dBµA/m, values in dBµV/m seems to be wrong
| |
− | * #5424: Final measurement is not using RMS detector, but only the Peak Detector
| |
− | * #5422: RadiSense error device not connected
| |
− | * #5421: Sweep is not completed for the whole band
| |
− | * #4181: Conversion factor for magnetic field measurement
| |
− | * #4119: Driver R&S FSIQ 26
| |
− |
| |
− | version 2014.1.13
| |
− | --------------
| |
− | * #5411: Measuring the peak will result in an endless loop of zooming-in
| |
− | * #5400: RadiTurn no match was found during the specified regular expression
| |
− | * #5098: After entering LLF data the wrong datafield is selected
| |
− | * #5068: Folders opened with keyboard are not showing TSF files in Select TSF window
| |
− | * #4964: Arrows are not correctly centred in the buttons
| |
− | * #4953: Changing configuration of an Unit is not refreshing the list correctly
| |
− | * #4590: Selected frequency step is not supported error (R&S ESVS10 receiver)
| |
− | * #4588: Step frequency is not defined error
| |
− | * #4564: Possibility to do Prescan and Final Measurements with different devices
| |
− | * #4560: FSP30 rounding
| |
− | * #4388: Preamplifier R&S ESU40 Analyzer is automatically turned off
| |
− | * #4182: Sweep time is doubled
| |
− | * #4166: Sorting of the directory structure in the tsf selection window
| |
− | * #4061: Unable to perform Qpk scan with R&S FSP
| |
− | * #3774: stepsize for receiver is not configurable
| |
− | * #2897: The unit description in the correction file is not displayed correctly, it states unknow instead of the unit
| |
− | * #1496: At the end of the test, antenna tower should go to lowest specified height
| |
− |
| |
− | version 2014.1.12
| |
− | --------------
| |
− | * #5401: Peak detection doesn't detect peak if peak is very close to 0 dBuV
| |
− | * #4938: Adding a new basic or product standard is not refreshing the list correctly
| |
− | * #3817: ESIB 40 Tracking Generator
| |
− | * #2467: ModeOfOperation is put on the window without the space
| |
− |
| |
− | version 2014.1.11
| |
− | --------------
| |
− | * #5398: Detection of the RadiTurn is not working
| |
− | * #5116: Peak shifts all over the frequency band
| |
− | * #3893: Zooming In places all peaks to one frequency
| |
− |
| |
− | version 2014.1.10
| |
− | --------------
| |
− | * #5397: R&S BBA100 is not directly set in operate mode
| |
− | * #5392: RadiMation error 3 ‘The system cannot find the path specified’
| |
− | * #5388: Units are not visbible during Manual Mode
| |
− | * #5386: Extend R&S BBA100 driver with LAN communication
| |
− | * #5288: Device drivers advanced configuration screen doesn't show titles
| |
− | * #5234: Not possible to update or install RadiMation with network settings
| |
− | * #5123: No messages are shown during a new installation when RadiMation is running in background
| |
− | * #5041: Device Drivers setup is not automatically selecting the latest installed RM version
| |
− | * #4862: Icons for some windows are not alway correctly showed
| |
− | * #4732: Agilent 4446A check doesn't give error but crashes
| |
− | * #4620: Description of event data is missing
| |
− | * #4572: Windows Certified RadiPower device drivers should be included in DRIVERS.EXE
| |
− | * #4544: Different frequencies with final peak measurement
| |
− | * #4537: Error when starting RadiMation
| |
− | * #4528: After installation of new RadiMation older versions are not working anymore
| |
− | * #4519: Icons related to RadiMation are not correct
| |
− | * #4518: Device Drivers system gone
| |
− | * #4440: information field is not updated correctly
| |
− | * #3769: When starting an installation of RadiMation it should be checked if an other version is already running
| |
− | * #3624: Configuration files are not shared between users on a Windows 7 PC
| |
− | * #3556: Unexpected error; quitting
| |
− | * #2734: a Bluescreen appears, when the PC is set to Hibernatemode and then the dongle is removed.
| |
− | * #2573: Missing drive can corrupt the setting during the install
| |
− | * #1647: uninstall not available for multiversion of Radimation
| |
− |
| |
− | version 2014.1.9
| |
− | --------------
| |
− | * #5393: R&S OSP 120 does not switch
| |
− | * #5382: Connecting issue with R&S BBA100
| |
− | * #4981: Not possible to select a calibration kit during the network analyzer tests
| |
− | * #4943: Allow to perform a 1 port S-parameter system calibration on port 2 of the network analyzer
| |
− | * #4941: After a 1 port S-parameter system calibration, it is still possible to perform a S12 test
| |
− | * #4056: USB communication for the R&S SMB100A
| |
− |
| |
− | version 2014.1.8
| |
− | --------------
| |
− | * #5391: Amplifier Research FP7018 is returning strange values
| |
− | * #5389: Driver R&S ESRP EMI Test Receiver
| |
− | * #5387: R&S OSP 120 does only support LAN communication
| |
− | * #5380: Test-sites are not found during network installation
| |
− | * #5365: Second measurement is missing of Agilent 34970A AD converter
| |
− | * #5118: Inconsistency during zooming on peaks
| |
− | * #5116: Peak shifts all over the frequency band
| |
− | * #5083: Multiple final measurements are performed
| |
− | * #5060: Span of the peak detection is set to small or to large by RadiMation, neighbor peaks could be measured
| |
− | * #5053: Manual selected peak is not measured/found during final peak measurement
| |
− | * #4255: Driver: strange VBW value is set
| |
− |
| |
− | version 2014.1.7
| |
− | --------------
| |
− | * #5378: Units behind modulation setting are missing in RI Substiution
| |
− | * #5376: No graph data is shown
| |
− | * #5360: Include keyword of external test results should start at 1 instead of 0
| |
− | * #5343: RadiPower Windows Drivers for Windows 8.1
| |
− | * #5273: Show vertical and horizontal max peak graphs by default
| |
− | * #4362: .NET: no units for modulation settings
| |
− | * #2879: Driver: Keithley 2701
| |
− |
| |
− | version 2014.1.6
| |
− | --------------
| |
− | * #5367: Multiple modulation forms during Radiated Immunity test
| |
− | * #5364: Setting the RBW of the R&S ESMI is not always working correctly
| |
− | * #5363: Download of Drivers.exe is marked of being unverified
| |
− | * #5352: Configurable Signal Generator doesn't retain frequency range
| |
− | * #5351: NRVS communication issues
| |
− | * #5336: Driver Agilent 34902A switch matrix 16x relay
| |
− | * #5332: Automatic peak detection performed in manual mode is not working
| |
− | * #5302: RF Amplifier Not all bytes are written (..) within the timeout
| |
− | * #5301: RF Amplifier device not connected
| |
− | * #5298: Add LAN communication for Agilent N5171B Signal generator
| |
− | * #5295: Multiple peaks are detected on almost the same frequency
| |
− | * #5279: Driver AD Agilent 34972A (DAQ)
| |
− | * #5267: EMCO 1090 is not working
| |
− | * #5263: Driver Bonn BLMA 0832-270D
| |
− | * #5173: Generate a maximum trace, when more than one trace is taken. We need only the maximum value
| |
− | * #5158: LLF color is not retained
| |
− | * #5097: Changing LLF style is not updated in graph
| |
− | * #5096: RS ESAI Analyzer Input 2 Timeout while waiting for *OPC command
| |
− | * #5093: Creating a new Limit Line is not shown in graph
| |
− | * #4799: Driver ESAI Tracking Generator
| |
− | * #4735: 4446A preselector is searched when deselected in driver settings
| |
− | * #4709: EUT file should open latest RadiMation version installed
| |
− | * #4708: EUT is only opening RadiMation and not the file
| |
− | * #4567: Measured frequencies are not corresponding with ESBI
| |
− | * #4520: Dragging a valid RadiMation file should open it
| |
− | * #4458: peak detection is not working properly
| |
− | * #2751: Limit line files turn black after setting the colors
| |
− | * #2700: Limit line is loosing the configured color
| |
− | * #2529: Opening a RadiMation file like eut or cor does not show in RadiMation
| |
− | * #2354: ISO standards do not require that all raw data is stored
| |
− | * #284: Make it possible that files can be dragged and dropped from the windows explorer to RadiMation
| |
− |
| |
− | version 2014.1.5
| |
− | --------------
| |
− | * #5348: When auto trigger mode is selected for a VI Powermeter, it always remains in auto trigger mode
| |
− | * #5331: ESVS10 performs two scans instead of one
| |
− | * #5318: CAL file used by TSF is not easily visible
| |
− | * #5314: RadiMation database table and fields are somethimes not retained
| |
− | * #5308: R&S ESU8 timeout expired before OPC
| |
− | * #5303: RF Amplifier Impossible to get description string (..) Unknown RadiMation error
| |
− | * #5299: R&S SMP02 Signal generator -222 Data out of range error
| |
− | * #5297: Unhandled Exception 'disposed object' for LISN and Merge
| |
− | * #5257: RM is not returning RTT1001B turntable controller motor error
| |
− | * #5236: Cannot access a disposed object after closing RadiMation
| |
− | * #5150: R&S SMA100A/SMC100A timeout while waiting for OPC command
| |
− | * #4899: Peaks detection is not correct after initial sweeps and final peaks are not/wrong measured
| |
− | * #4802: Magnetic Field method can't use TT and AT
| |
− | * #3898: When cancelling an emission measurement the defined values for the final measurement are lost
| |
− |
| |
− | version 2014.1.4
| |
− | --------------
| |
− | * #5313: Readout of SOPM01/03 is slower
| |
− | * #5265: Metrohm Turntable device driver
| |
− | * #5238: Test is opening unwanted windows after closing it
| |
− | * #5042: Test is starting after closing it
| |
− | * #4638: Closing test configuration window will open test window
| |
− |
| |
− | version 2014.1.3
| |
− | --------------
| |
− | * #5328: Agilent Technologies N191A powermeter error
| |
− | * #5300: Unhandled Exception 'Object reference not set' for Climat Chamber
| |
− | * #5296: Unhandled Exception 'Object reference not set' for Emission X + k * S
| |
− | * #5290: Update the splash screen logo of EMV to ETS
| |
− | * #5283: Error when creating correction file from 1 dB compression measurement
| |
− | * #5270: Peak conservation setting is ignored
| |
− | * #5232: R&S HCC Not all bytes are written to the GPIB-Board within the timeout period (GPIB:EABO)
| |
− | * #5231: Multiband Fixed power Unhandled exception Arithmetic operation resulted in an overflow error
| |
− | * #5229: Opening Mil Std Magnetic test data is generating an Unhandled exception
| |
− | * #5206: EUT Compression Calibration Unhandled Exception error
| |
− | * #5176: Unhandled exception during Uniform Field Area Calculation
| |
− | * #5029: Innco CO3000 tolerance on the movement is not managed
| |
− | * #5022: Innco CO3000 is started at 100cm instead of 90cm
| |
− | * #4776: Closing the 16 point result window using the top-right red cross, is not closing the document
| |
− | * #4703: Still test running or still documents loaded errors without any window opened
| |
− | * #4255: Driver: strange VBW value is set
| |
− | * #4226: Wrong command PMM9030/ PMM9060 to set RBW
| |
− | * #2513: Zoom-in factor for frequency detection of peaks > 100
| |
− |
| |
− | version 2014.1.2
| |
− | --------------
| |
− | * #5324: RadiPower RPR2006C not recognized
| |
− | * #5264: RPR2006C is not recognised
| |
− | * #5233: Validation BCI reference calibration
| |
− | * #5194: Improve tracking of peaks, during a peak zoom-in
| |
− | * #5193: Continuous measure should use max-hold when turntable and antenna tower are not moving
| |
− | * #5192: Increase default zoom-in factor for emission peak zoom-in
| |
− | * #5170: The feature "Continuous measure" does not deliver the maximum value. It delivers the actual value.
| |
− | * #1387: Auto peak sweeps
| |
− |
| |
− | version 2014.1.1
| |
− | --------------
| |
− | * #5275: Unhandled exception object reference not set to an instance of an object
| |
− | * #5268: Supporting modulation forms for Agilent N5181B
| |
− | * #5247: Driver R&S OSP 120 switch matrix
| |
− | * #5246: Add 'Pre Wait Time' functionality for Levelling and Monitoring measurement settings
| |
− | * #5175: HP 8116A modulation source
| |
− | * #5174: Enable external modulation for HP 8648x Signal generator
| |
− | * #4974: Driver R&S amplifier system BBA100
| |