Difference between revisions of "Release Notes/Solved items Version 2016.1.6"
(Created page with '== RadiMation version 2016.1.6 == * #5864: Preamplifier and reference setting have no effect for the ESL6 * #6259: ALL RADIATED EMISSION TESTS is not replacing keywords of corres…') |
|||
| Line 1: | Line 1: | ||
== RadiMation version 2016.1.6 == | == RadiMation version 2016.1.6 == | ||
* #5864: Preamplifier and reference setting have no effect for the ESL6 | * #5864: Preamplifier and reference setting have no effect for the ESL6 | ||
| + | * #6086: Driver for the Delphin Technology Expert Key 100 box | ||
* #6259: ALL RADIATED EMISSION TESTS is not replacing keywords of corresponding tests | * #6259: ALL RADIATED EMISSION TESTS is not replacing keywords of corresponding tests | ||
| + | * #6663: Provide same functionality as RadiMon | ||
* #6687: Driver: Luthi MDS22 | * #6687: Driver: Luthi MDS22 | ||
* #6766: Measuring settings Lines/Neutral with LISN | * #6766: Measuring settings Lines/Neutral with LISN | ||
| + | * #6882: System requirements for RadiMation | ||
* #6883: Using radiated immunity for shielding effectiveness | * #6883: Using radiated immunity for shielding effectiveness | ||
* #6915: Driver: Schwarzbeck BBA 9106 antenna | * #6915: Driver: Schwarzbeck BBA 9106 antenna | ||
| Line 13: | Line 16: | ||
* #6926: Driver: Prana MT440DC Amplifier | * #6926: Driver: Prana MT440DC Amplifier | ||
* #6927: Driver: Teseq NSG437 ESD generator | * #6927: Driver: Teseq NSG437 ESD generator | ||
| + | * #6941: Driver: Rohde & Schwarz NRVS | ||
* #7048: Selection of 'Neutral' LISN line is wrong when restarting last TSF | * #7048: Selection of 'Neutral' LISN line is wrong when restarting last TSF | ||
* #7129: Corrupt Customized.xml will raise an error and crash RadiMation | * #7129: Corrupt Customized.xml will raise an error and crash RadiMation | ||
| Line 20: | Line 24: | ||
* #7273: Behaviour of the ||EUT|DESCRIPTION|| Report Generator keyword | * #7273: Behaviour of the ||EUT|DESCRIPTION|| Report Generator keyword | ||
* #7280: Tabs of Device specific settings on the devices Virtual Instrument window are not shown | * #7280: Tabs of Device specific settings on the devices Virtual Instrument window are not shown | ||
| + | * #7282: Driver: Schaffner NSG 3025 BurstGenerator | ||
| + | * #7286: Vectawave amplifier is in endless loop, when an error is present | ||
| + | * #7317: RE MB build in preamplifier used at higher allowed frequency | ||
| + | * #7339: Driver: Agilent E4412 | ||
| + | * #7350: Driver: AR 500W1000B | ||
| + | * #7359: Is the standard Din-EN 61000-4-6 supported through subsitution method? | ||
| + | * #7377: Clear button should be pressed automatically when the VI window is closed | ||
| + | * #7414: Device not connected errors for the PMM 7010 Low Input and Hi Input drivers | ||
| + | * #7430: No communication (device not connected) with Field Sensor FP5080 | ||
| + | * #7431: RFS is not working and keeps powering off | ||
Revision as of 10:11, 18 August 2016
RadiMation version 2016.1.6
- #5864: Preamplifier and reference setting have no effect for the ESL6
- #6086: Driver for the Delphin Technology Expert Key 100 box
- #6259: ALL RADIATED EMISSION TESTS is not replacing keywords of corresponding tests
- #6663: Provide same functionality as RadiMon
- #6687: Driver: Luthi MDS22
- #6766: Measuring settings Lines/Neutral with LISN
- #6882: System requirements for RadiMation
- #6883: Using radiated immunity for shielding effectiveness
- #6915: Driver: Schwarzbeck BBA 9106 antenna
- #6916: Driver: Schwarzbeck MDS21 Absorbing clamp
- #6922: Driver: Teseq CBA 230M-80 amplifier
- #6923: Driver: Teseq PMU6003 Powermeter
- #6924: Driver: TESEQ DCP 0100A Directional Coupler
- #6925: Driver: Teseq KEMZ 801 Injection Clamp
- #6926: Driver: Prana MT440DC Amplifier
- #6927: Driver: Teseq NSG437 ESD generator
- #6941: Driver: Rohde & Schwarz NRVS
- #7048: Selection of 'Neutral' LISN line is wrong when restarting last TSF
- #7129: Corrupt Customized.xml will raise an error and crash RadiMation
- #7229: HP 8594E Spectrum analyser is not following signal generator.
- #7237: Report Generator graph only shows peak markers without the trace itself.
- #7243: Probe numbers are not shown anymore in the Field inputs dialog
- #7273: Behaviour of the ||EUT|DESCRIPTION|| Report Generator keyword
- #7280: Tabs of Device specific settings on the devices Virtual Instrument window are not shown
- #7282: Driver: Schaffner NSG 3025 BurstGenerator
- #7286: Vectawave amplifier is in endless loop, when an error is present
- #7317: RE MB build in preamplifier used at higher allowed frequency
- #7339: Driver: Agilent E4412
- #7350: Driver: AR 500W1000B
- #7359: Is the standard Din-EN 61000-4-6 supported through subsitution method?
- #7377: Clear button should be pressed automatically when the VI window is closed
- #7414: Device not connected errors for the PMM 7010 Low Input and Hi Input drivers
- #7430: No communication (device not connected) with Field Sensor FP5080
- #7431: RFS is not working and keeps powering off
