Difference between revisions of "Release Notes/Solved items Version 2018.2.1"
(→RadiMation version 2018.2.1) |
|||
| Line 5: | Line 5: | ||
* #7794: Compression Gain System Calibration when saved it removes rest of suggested name discription after any. | * #7794: Compression Gain System Calibration when saved it removes rest of suggested name discription after any. | ||
* #7869: Y axis scaling in graph improvements | * #7869: Y axis scaling in graph improvements | ||
| + | * #8021: When a Band has been selected the TSF is marked as being changed | ||
* #8148: Modification to Monitoring input channel sometimes reset the configured channel to 1 | * #8148: Modification to Monitoring input channel sometimes reset the configured channel to 1 | ||
| + | * #8149: Graph Customization Configuration of the global graph color settings outside a test is not updating the global settings | ||
| + | * #8158: Multiband Emission TSF configuration is not using the maximum number of selectable detectors | ||
| + | * #8263: Opening non existing file with RadiLog crash Gives exception | ||
| + | * #8265: Confirmation message is default selecting wrong answer (No) instead of Yes | ||
* #8272: General Information in a calibration file cannot be shown if the calibration file is readonly | * #8272: General Information in a calibration file cannot be shown if the calibration file is readonly | ||
* #8283: A 'Copy to Clipboard' action is marking a COR file as being changed | * #8283: A 'Copy to Clipboard' action is marking a COR file as being changed | ||
| + | * #8290: System Calibration Attenuation / Gain Message shows message to connect the sensor power, but requires a forward powermeter in test equipment | ||
* #8380: Selecting a field probe in a testsite takes more than 20 seconds | * #8380: Selecting a field probe in a testsite takes more than 20 seconds | ||
| + | * #8587: Changing graph customizations is not setting the changed state of the test | ||
* #8757: Not possible to edit MB EFT test from the sequence window | * #8757: Not possible to edit MB EFT test from the sequence window | ||
* #8864: Graphs of gain compression calibration are not showing all the data | * #8864: Graphs of gain compression calibration are not showing all the data | ||
| Line 19: | Line 26: | ||
* #8948: Not all calibration tests are listed in the add test function of the sequence. | * #8948: Not all calibration tests are listed in the add test function of the sequence. | ||
* #9002: Also show the latest DRIVERS.EXE version on the RadiWiki Main page | * #9002: Also show the latest DRIVERS.EXE version on the RadiWiki Main page | ||
| + | * #9032: Harmonics show -1000dBm | ||
* #9062: Measurement of Harmonics with 2 power meters | * #9062: Measurement of Harmonics with 2 power meters | ||
* #9082: RadiMation calibration expire date database error crash | * #9082: RadiMation calibration expire date database error crash | ||
| Line 26: | Line 34: | ||
* #9202: Adding input fieldprobe without enabling any probe in RI MB test, is causing object reference | * #9202: Adding input fieldprobe without enabling any probe in RI MB test, is causing object reference | ||
* #9218: Infinit loop graph elements being added for gain calibration test | * #9218: Infinit loop graph elements being added for gain calibration test | ||
| + | * #9219: Cannot find the device driver - (Device is not on - Device driver is installed) | ||
* #9224: In ErrorReport an unknown label 'usr agr' is present | * #9224: In ErrorReport an unknown label 'usr agr' is present | ||
| + | * #9232: Emission peak number not correct | ||
* #9242: Exception is shown when EUT Monitoring input is opened | * #9242: Exception is shown when EUT Monitoring input is opened | ||
* #9246: Script for copying latest RadiMation release to Radi-Products Production folder | * #9246: Script for copying latest RadiMation release to Radi-Products Production folder | ||
* #9248: Readonly Network Analyzer system calibration still has some fields enabled | * #9248: Readonly Network Analyzer system calibration still has some fields enabled | ||
* #9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized | * #9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized | ||
| + | * #9267: Continue button does not work | ||
* #9300: How to show the points only that have the status 'fail' | * #9300: How to show the points only that have the status 'fail' | ||
* #9301: ErrorReport: "ETS-Lindgren EMField 7008-005 FWD power: Parameter too low" | * #9301: ErrorReport: "ETS-Lindgren EMField 7008-005 FWD power: Parameter too low" | ||
| + | * #9303: ErrorReport: "Radimation crashes suddenly after CE measurement is finished " | ||
* #9312: EMI reciver switch to spectrum analyzermode while initialisation for conducted emission testing | * #9312: EMI reciver switch to spectrum analyzermode while initialisation for conducted emission testing | ||
| + | * #9315: Auto Backup of RadiLog | ||
* #9323: SystemCrash: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. | * #9323: SystemCrash: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. | ||
* #9333: ErrorReport: "Cannot find the device driver. | * #9333: ErrorReport: "Cannot find the device driver. | ||
Revision as of 13:40, 5 September 2018
RadiMation version 2018.2.1
- #4670: Building the 'TestSites' menu can take a long time
- #4777: Printing the angle plot of a Multiband emission test is printing the frequency graph
- #6529: Version numbers in the Device driver DLL's should use the build number that is used, also if adjusted to the SVN revision
- #7794: Compression Gain System Calibration when saved it removes rest of suggested name discription after any.
- #7869: Y axis scaling in graph improvements
- #8021: When a Band has been selected the TSF is marked as being changed
- #8148: Modification to Monitoring input channel sometimes reset the configured channel to 1
- #8149: Graph Customization Configuration of the global graph color settings outside a test is not updating the global settings
- #8158: Multiband Emission TSF configuration is not using the maximum number of selectable detectors
- #8263: Opening non existing file with RadiLog crash Gives exception
- #8265: Confirmation message is default selecting wrong answer (No) instead of Yes
- #8272: General Information in a calibration file cannot be shown if the calibration file is readonly
- #8283: A 'Copy to Clipboard' action is marking a COR file as being changed
- #8290: System Calibration Attenuation / Gain Message shows message to connect the sensor power, but requires a forward powermeter in test equipment
- #8380: Selecting a field probe in a testsite takes more than 20 seconds
- #8587: Changing graph customizations is not setting the changed state of the test
- #8757: Not possible to edit MB EFT test from the sequence window
- #8864: Graphs of gain compression calibration are not showing all the data
- #8881: Graphs of amplifier linearity calibration cannot be shown in Watts unit
- #8882: Better auto scaling for the y-axis of the amplifier linearity graphs
- #8892: Wrong title Harmonics calibration
- #8893: Harmonics test graphs does not use stored graph settings
- #8904: Suggested filename for the calibration is not correct if the TSF contains a .
- #8941: ctlEvents.cs is included twice and seems to be duplicated
- #8948: Not all calibration tests are listed in the add test function of the sequence.
- #9002: Also show the latest DRIVERS.EXE version on the RadiWiki Main page
- #9032: Harmonics show -1000dBm
- #9062: Measurement of Harmonics with 2 power meters
- #9082: RadiMation calibration expire date database error crash
- #9115: Temp filenames in creating new files
- #9125: Pressing update in graph config does not update the image.
- #9186: Suggested filename of a calibration file is only 'm.cal' if the TSF description is: "80-1000 MHz, 10 V/m"
- #9202: Adding input fieldprobe without enabling any probe in RI MB test, is causing object reference
- #9218: Infinit loop graph elements being added for gain calibration test
- #9219: Cannot find the device driver - (Device is not on - Device driver is installed)
- #9224: In ErrorReport an unknown label 'usr agr' is present
- #9232: Emission peak number not correct
- #9242: Exception is shown when EUT Monitoring input is opened
- #9246: Script for copying latest RadiMation release to Radi-Products Production folder
- #9248: Readonly Network Analyzer system calibration still has some fields enabled
- #9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized
- #9267: Continue button does not work
- #9300: How to show the points only that have the status 'fail'
- #9301: ErrorReport: "ETS-Lindgren EMField 7008-005 FWD power: Parameter too low"
- #9303: ErrorReport: "Radimation crashes suddenly after CE measurement is finished "
- #9312: EMI reciver switch to spectrum analyzermode while initialisation for conducted emission testing
- #9315: Auto Backup of RadiLog
- #9323: SystemCrash: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
- #9333: ErrorReport: "Cannot find the device driver.
- #9334: ErrorReport: "Startfrequenz ist zu niedrig fuer das gewaehlte Geraet"
- #9340: Driver: Shaffner Broadband Horn Antenna 1-18 GHZ - BHA 9118
- #9353: Popup menu of available devices has no seperator between the actions and the devices
- #9358: Radimation crashes when device is in use by other software
- #9372: How to remote control LISN R&S ENV216 with the R&S ESW 26 via radimation
- #9373: Rohde & Schwarz SMR 20 (ID7340): Specific System Error: 110,"Output unleveled"
- #9389: How do we set-up for testing acording EN6100-3-2 and EN 61000-3-3
- #9390: The file extensions of the template and the output document do not match
