Difference between revisions of "Release Notes/Solved items Version 2019.1.1"
(→RadiMation version 2019.1.1) |
(Tag: Rollback) |
||
(5 intermediate revisions by 3 users not shown) | |||
Line 2: | Line 2: | ||
* #1924: Zooming in the graph is not possible in compression test | * #1924: Zooming in the graph is not possible in compression test | ||
* #4370: TSF file is duplicated | * #4370: TSF file is duplicated | ||
+ | * #4670: Building the 'TestSites' menu can take a long time | ||
+ | * #4777: Printing the angle plot of a Multiband emission test is printing the frequency graph | ||
+ | * #5754: Graph of UFA calculation starts at -1, but should start at 0 | ||
+ | * #6529: Version numbers in the Device driver DLL's should use the build number that is used, also if adjusted to the SVN revision | ||
+ | * #8613: If auto-save is active, data of measurement should be saved to disk when automatic mode is left | ||
+ | * #7793: Compression Gain System Calibration representation of graph is vague | ||
+ | * #7794: Compression Gain System Calibration when saved it removes rest of suggested name description after any. | ||
+ | * #7795: Compression Gain Test default value of added compression point is invalid | ||
+ | * #7869: Y axis scaling in graph improvements | ||
+ | * #8021: When a Band has been selected the TSF is marked as being changed | ||
+ | * #8024: Magnifier in directory configuration is opening wrong folder or not opening the folder, but after multiple clicks it is opening the selection window | ||
+ | * #8148: Modification to Monitoring input channel sometimes reset the configured channel to 1 | ||
+ | * #8149: Graph Customization Configuration of the global graph color settings outside a test is not updating the global settings | ||
+ | * #8158: Multiband Emission TSF configuration is not using the maximum number of selectable detectors | ||
+ | * #8220: Graph customization is not applied when a test is opened | ||
+ | * #8265: Confirmation message is default selecting wrong answer (No) instead of Yes | ||
+ | * #8268: Graph Customization is not updated | ||
+ | * #8272: General Information in a calibration file cannot be shown if the calibration file is readonly | ||
+ | * #8277: Disconnecting one VI of four connected RadiCentre devices is raising errors | ||
+ | * #8283: A 'Copy to Clipboard' action is marking a COR file as being changed | ||
+ | * #8290: System Calibration Attenuation / Gain Message shows message to connect the sensor power, but requires a forward powermeter in test equipment | ||
+ | * #8318: Impossible to remove graph line from different test data when the file has been closed | ||
+ | * #8319: Multiband shows an unexpected frequency graph line and table information which can't be removed | ||
+ | * #8374: Multiple PC's running the same confdvdr location gives error | ||
+ | * #8380: Selecting a field probe in a testsite takes more than 20 seconds | ||
+ | * #8546: Index was out of range. Must be non-negative and less than the size of the collection. | ||
+ | * #8554: Ability to show polar plot of field strength in Multiband Immunity test | ||
+ | * #8563: Not possible to select 1 point per row in UFA calculation | ||
+ | * #8564: ErrorReport: "Index was outside the bounds of the array. | ||
+ | * #8587: Changing graph customizations is not setting the changed state of the test | ||
+ | * #8678: Allow 1 port network analyzer calibration for the Agilent 8753 | ||
+ | * #8733: Adding a multiline note field in the general information items of the eut is not possible | ||
+ | * #8757: Not possible to edit MB EFT test from the sequence window | ||
+ | * #8812: Wrong lines are drawn in the Multiband Immunity graph, when the same frequencies are tested often | ||
+ | * #8820: Ability to use Spectrum analyzer for harmonics measurements | ||
+ | * #8864: Graphs of gain compression calibration are not showing all the data | ||
+ | * #8866: No error is raised when the fieldprobe has a multiply correction file attached with values below 0 | ||
+ | * #8881: Graphs of amplifier linearity calibration cannot be shown in Watts unit | ||
+ | * #8882: Better auto scaling for the y-axis of the amplifier linearity graphs | ||
+ | * #8887: RadiMation free Virtual powermeter | ||
+ | * #8892: Wrong title Harmonics calibration | ||
+ | * #8893: Harmonics test graphs does not use stored graph settings | ||
+ | * #8904: Suggested filename for the calibration is not correct if the TSF contains a . | ||
+ | * #8918: print graph shows temp document already being used by another process | ||
+ | * #8938: Perform antenna scan calibration using a network analyzer instead of signal generator and spectrum analyzer | ||
+ | * #8941: ctlEvents.cs is included twice and seems to be duplicated | ||
+ | * #8948: Not all calibration tests are listed in the add test function of the sequence. | ||
+ | * #8974: Selecting multiple bands with shift is not working as it should be | ||
+ | * #9013: Sort the names of the graph as they are shown below the 'Graphs' button | ||
+ | * #9025: Table tab does not display its measured values in a correct manor | ||
+ | * #9032: Harmonics show -1000dBm | ||
+ | * #9062: Measurement of Harmonics with 2 power meters | ||
+ | * #9082: RadiMation calibration expire date database error crash | ||
+ | * #9100: Object reference not set to an instance of an object: clsGraphElements.FilterShownGraphElements | ||
+ | * #9105: GetGlobalizedHashCode Object must be of type String | ||
+ | * #9125: Pressing update in graph config does not update the image. | ||
+ | * #9137: Driver: Mini-Circuits SSG-6001RC | ||
+ | * #9185: Unclear time logging behaviour Radimation | ||
+ | * #9186: Suggested filename of a calibration file is only 'm.cal' if the TSF description is: "80-1000 MHz, 10 V/m" | ||
+ | * #9188: Corrupt testfile, no data is visible in the graph | ||
+ | * #9218: Infinit loop graph elements being added for gain calibration test | ||
+ | * #9219: Cannot find the device driver - (Device is not on - Device driver is installed) | ||
+ | * #9232: Emission peak number not correct | ||
+ | * #9239: When starting an isotropy measurement the angle tab is not displayed | ||
+ | * #9242: Exception is shown when EUT Monitoring input is opened | ||
+ | * #9248: Readonly Network Analyzer system calibration still has some fields enabled | ||
+ | * #9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized | ||
+ | * #9267: Continue button does not work | ||
+ | * #9287: Test data disappeared | ||
+ | * #9288: PEAK TABLE keyword no longer works. | ||
+ | * #9291: Save error report standard suggests .log extension | ||
+ | * #9292: When there is no EUT there is no log file in the error report | ||
+ | * #9299: Polar graph displays a graph line that has it's visibility tuned off | ||
+ | * #9303: ErrorReport: "Radimation crashes suddenly after CE measurement is finished " | ||
+ | * #9304: Exception of type 'System.OutOfMemoryException' was thrown. | ||
+ | * #9310: Testdata again not visible. | ||
+ | * #9311: Test data lost / not visible | ||
+ | * #9315: Auto Backup of RadiLog | ||
+ | * #9353: Popup menu of available devices has no seperator between the actions and the devices | ||
+ | * #9356: Configurable AD Converter value always 0 | ||
+ | * #9357: Driver: new RadiSense 10 models | ||
+ | * #9384: Index out of range: clsGraphElements.HideElement. | ||
+ | * #9427: Cancel button of Multiband Immunity TSF window is not working anymore | ||
+ | * #9429: Destination array was not long enough | ||
+ | * #9431: External FM modulation waveform is not saved | ||
+ | * #9445: Battery radisense error, amp did not stop generating 100 vm | ||
+ | * #9449: Object reference not set to an instance of an object: clsImpedanceTableCalculation.GetResistanceFromImpedanceTable( | ||
+ | * #9452: Burst, graph does not re-scale when the to measure time is < measured time | ||
+ | * #9453: Close RadiMation with FieldSensor open and connected gives error | ||
+ | * #9454: Object reference error when switching tabs in Configuration window | ||
+ | * #9460: Closing Virtual Forward Power Meter window shows error: Power Meter Init count: 1 | ||
+ | * #9465: Carrier frequency control is not correctly sized on the VI Signal generator window | ||
+ | * #9496: Use default graph customization disables controls | ||
+ | * #9504: Report Generator: date format wrong | ||
+ | * #9507: Input string was not in a correct format. | ||
+ | * #9523: Keyword PEAK TABLE does not work in 2018.1.4 | ||
+ | * #9533: Power Burst graphs are not correctly shown | ||
+ | * #9535: Configuring a multiband test has a slow response | ||
+ | * #9567: Table is turned after last peak measurement | ||
+ | * #9600: Object reference: Invoke RaiseProgressChangedEvent | ||
+ | * #9634: Isotropy positioner is not being initialized at first angle at the begin of the test. | ||
+ | * #9635: Sudden shutdown without warning. | ||
+ | * #9637: The question 'Are you sure you want to close the test' is shown twice. | ||
+ | * #9638: Opening a small amplifier linearity test result is taking minutes | ||
+ | * #9639: Measure time and step frequency controls are not enabled correctly in RE Multiband when switching testsites | ||
+ | * #9653: Driver: CDN - MEB M5/25A | ||
+ | * #9657: App. Note 115: How to measuring Amplifier harmonics using RadiMation. | ||
+ | * #9658: RM 2018.1.3 crashes often, with object reference not set | ||
+ | * #9687: Multiband EFT is very difficult to close when the automated test is finished | ||
+ | * #9694: External Modulation options not always shown | ||
+ | * #9714: Deadlocking in clsDataIdentifiers. | ||
+ | * #9715: Move during measurement is not shown | ||
+ | * #9719: Polar plots don't scale correct. | ||
+ | * #9731: New sweep in a Multiband Emission test is not overwriting the previous sweep | ||
+ | * #9732: Testdata of a singleband immunity test is not saved at the end of a test | ||
+ | * #9734: Index out of bounds when shift clicking on a band. | ||
+ | * #9742: Changing a sequence file does not work correctly. | ||
+ | * #9753: Driver: Rohde & Schwarz switch matrix OSP230 Frame F01 with options OSP-B133, OSP-B104 | ||
+ | * #9795: Object reference not set to an instance of an object. | ||
+ | * #9819: Fix all warnings in the RADDOCS project | ||
+ | * #9820: Fix all warnings in the RADTESTS project | ||
+ | * #9821: Fix all warnings in the RADIMAT project | ||
+ | * #9822: Fix all warnings in the RADEMITESTS project | ||
+ | * #9823: Fix all warnings in the INTERPOLATIONCHART project | ||
+ | * #9824: Fix all warnings in the SAVEUNICODEFILETESTS project | ||
+ | * #9825: Fix all warnings in the INTERPOLATIONTESTS project | ||
+ | * #9826: Fix all warnings in the RADSTDCLTESTS project | ||
+ | * #9827: Fix all warnings in the HTTP_POST project | ||
+ | * #9838: Crash during report generation | ||
+ | * #9855: Set all C# projects to 'Treat all warnings as error' to 'All' | ||
+ | * #9874: This is not a valid action for the end of a row. | ||
+ | * #9877: Radiated emission bandwidth is not correctly displayed in 2019.1.1 | ||
+ | * #9884: EUT window not visible | ||
+ | * #9891: Table is not visible during test | ||
+ | * #9897: Too much limitlines in MB RE is causing radimation to get slow and hang | ||
+ | * #9922: Driver: AR250S1G6M1 Amplifier | ||
+ | * #9923: Driver: Coupler, Amplifier Research: DC7230A | ||
+ | * #9924: Driver: Amplifier AR5000A225A | ||
+ | * #9961: Incorrect bandwidth in report for CE and RE | ||
+ | * #10019: IF Overload is detected ESU26. |
Latest revision as of 14:12, 15 January 2021
RadiMation version 2019.1.1
- #1924: Zooming in the graph is not possible in compression test
- #4370: TSF file is duplicated
- #4670: Building the 'TestSites' menu can take a long time
- #4777: Printing the angle plot of a Multiband emission test is printing the frequency graph
- #5754: Graph of UFA calculation starts at -1, but should start at 0
- #6529: Version numbers in the Device driver DLL's should use the build number that is used, also if adjusted to the SVN revision
- #8613: If auto-save is active, data of measurement should be saved to disk when automatic mode is left
- #7793: Compression Gain System Calibration representation of graph is vague
- #7794: Compression Gain System Calibration when saved it removes rest of suggested name description after any.
- #7795: Compression Gain Test default value of added compression point is invalid
- #7869: Y axis scaling in graph improvements
- #8021: When a Band has been selected the TSF is marked as being changed
- #8024: Magnifier in directory configuration is opening wrong folder or not opening the folder, but after multiple clicks it is opening the selection window
- #8148: Modification to Monitoring input channel sometimes reset the configured channel to 1
- #8149: Graph Customization Configuration of the global graph color settings outside a test is not updating the global settings
- #8158: Multiband Emission TSF configuration is not using the maximum number of selectable detectors
- #8220: Graph customization is not applied when a test is opened
- #8265: Confirmation message is default selecting wrong answer (No) instead of Yes
- #8268: Graph Customization is not updated
- #8272: General Information in a calibration file cannot be shown if the calibration file is readonly
- #8277: Disconnecting one VI of four connected RadiCentre devices is raising errors
- #8283: A 'Copy to Clipboard' action is marking a COR file as being changed
- #8290: System Calibration Attenuation / Gain Message shows message to connect the sensor power, but requires a forward powermeter in test equipment
- #8318: Impossible to remove graph line from different test data when the file has been closed
- #8319: Multiband shows an unexpected frequency graph line and table information which can't be removed
- #8374: Multiple PC's running the same confdvdr location gives error
- #8380: Selecting a field probe in a testsite takes more than 20 seconds
- #8546: Index was out of range. Must be non-negative and less than the size of the collection.
- #8554: Ability to show polar plot of field strength in Multiband Immunity test
- #8563: Not possible to select 1 point per row in UFA calculation
- #8564: ErrorReport: "Index was outside the bounds of the array.
- #8587: Changing graph customizations is not setting the changed state of the test
- #8678: Allow 1 port network analyzer calibration for the Agilent 8753
- #8733: Adding a multiline note field in the general information items of the eut is not possible
- #8757: Not possible to edit MB EFT test from the sequence window
- #8812: Wrong lines are drawn in the Multiband Immunity graph, when the same frequencies are tested often
- #8820: Ability to use Spectrum analyzer for harmonics measurements
- #8864: Graphs of gain compression calibration are not showing all the data
- #8866: No error is raised when the fieldprobe has a multiply correction file attached with values below 0
- #8881: Graphs of amplifier linearity calibration cannot be shown in Watts unit
- #8882: Better auto scaling for the y-axis of the amplifier linearity graphs
- #8887: RadiMation free Virtual powermeter
- #8892: Wrong title Harmonics calibration
- #8893: Harmonics test graphs does not use stored graph settings
- #8904: Suggested filename for the calibration is not correct if the TSF contains a .
- #8918: print graph shows temp document already being used by another process
- #8938: Perform antenna scan calibration using a network analyzer instead of signal generator and spectrum analyzer
- #8941: ctlEvents.cs is included twice and seems to be duplicated
- #8948: Not all calibration tests are listed in the add test function of the sequence.
- #8974: Selecting multiple bands with shift is not working as it should be
- #9013: Sort the names of the graph as they are shown below the 'Graphs' button
- #9025: Table tab does not display its measured values in a correct manor
- #9032: Harmonics show -1000dBm
- #9062: Measurement of Harmonics with 2 power meters
- #9082: RadiMation calibration expire date database error crash
- #9100: Object reference not set to an instance of an object: clsGraphElements.FilterShownGraphElements
- #9105: GetGlobalizedHashCode Object must be of type String
- #9125: Pressing update in graph config does not update the image.
- #9137: Driver: Mini-Circuits SSG-6001RC
- #9185: Unclear time logging behaviour Radimation
- #9186: Suggested filename of a calibration file is only 'm.cal' if the TSF description is: "80-1000 MHz, 10 V/m"
- #9188: Corrupt testfile, no data is visible in the graph
- #9218: Infinit loop graph elements being added for gain calibration test
- #9219: Cannot find the device driver - (Device is not on - Device driver is installed)
- #9232: Emission peak number not correct
- #9239: When starting an isotropy measurement the angle tab is not displayed
- #9242: Exception is shown when EUT Monitoring input is opened
- #9248: Readonly Network Analyzer system calibration still has some fields enabled
- #9250: Number of sweeps in TSF of Network Analyzer EUT Calibration is not correctly initialized
- #9267: Continue button does not work
- #9287: Test data disappeared
- #9288: PEAK TABLE keyword no longer works.
- #9291: Save error report standard suggests .log extension
- #9292: When there is no EUT there is no log file in the error report
- #9299: Polar graph displays a graph line that has it's visibility tuned off
- #9303: ErrorReport: "Radimation crashes suddenly after CE measurement is finished "
- #9304: Exception of type 'System.OutOfMemoryException' was thrown.
- #9310: Testdata again not visible.
- #9311: Test data lost / not visible
- #9315: Auto Backup of RadiLog
- #9353: Popup menu of available devices has no seperator between the actions and the devices
- #9356: Configurable AD Converter value always 0
- #9357: Driver: new RadiSense 10 models
- #9384: Index out of range: clsGraphElements.HideElement.
- #9427: Cancel button of Multiband Immunity TSF window is not working anymore
- #9429: Destination array was not long enough
- #9431: External FM modulation waveform is not saved
- #9445: Battery radisense error, amp did not stop generating 100 vm
- #9449: Object reference not set to an instance of an object: clsImpedanceTableCalculation.GetResistanceFromImpedanceTable(
- #9452: Burst, graph does not re-scale when the to measure time is < measured time
- #9453: Close RadiMation with FieldSensor open and connected gives error
- #9454: Object reference error when switching tabs in Configuration window
- #9460: Closing Virtual Forward Power Meter window shows error: Power Meter Init count: 1
- #9465: Carrier frequency control is not correctly sized on the VI Signal generator window
- #9496: Use default graph customization disables controls
- #9504: Report Generator: date format wrong
- #9507: Input string was not in a correct format.
- #9523: Keyword PEAK TABLE does not work in 2018.1.4
- #9533: Power Burst graphs are not correctly shown
- #9535: Configuring a multiband test has a slow response
- #9567: Table is turned after last peak measurement
- #9600: Object reference: Invoke RaiseProgressChangedEvent
- #9634: Isotropy positioner is not being initialized at first angle at the begin of the test.
- #9635: Sudden shutdown without warning.
- #9637: The question 'Are you sure you want to close the test' is shown twice.
- #9638: Opening a small amplifier linearity test result is taking minutes
- #9639: Measure time and step frequency controls are not enabled correctly in RE Multiband when switching testsites
- #9653: Driver: CDN - MEB M5/25A
- #9657: App. Note 115: How to measuring Amplifier harmonics using RadiMation.
- #9658: RM 2018.1.3 crashes often, with object reference not set
- #9687: Multiband EFT is very difficult to close when the automated test is finished
- #9694: External Modulation options not always shown
- #9714: Deadlocking in clsDataIdentifiers.
- #9715: Move during measurement is not shown
- #9719: Polar plots don't scale correct.
- #9731: New sweep in a Multiband Emission test is not overwriting the previous sweep
- #9732: Testdata of a singleband immunity test is not saved at the end of a test
- #9734: Index out of bounds when shift clicking on a band.
- #9742: Changing a sequence file does not work correctly.
- #9753: Driver: Rohde & Schwarz switch matrix OSP230 Frame F01 with options OSP-B133, OSP-B104
- #9795: Object reference not set to an instance of an object.
- #9819: Fix all warnings in the RADDOCS project
- #9820: Fix all warnings in the RADTESTS project
- #9821: Fix all warnings in the RADIMAT project
- #9822: Fix all warnings in the RADEMITESTS project
- #9823: Fix all warnings in the INTERPOLATIONCHART project
- #9824: Fix all warnings in the SAVEUNICODEFILETESTS project
- #9825: Fix all warnings in the INTERPOLATIONTESTS project
- #9826: Fix all warnings in the RADSTDCLTESTS project
- #9827: Fix all warnings in the HTTP_POST project
- #9838: Crash during report generation
- #9855: Set all C# projects to 'Treat all warnings as error' to 'All'
- #9874: This is not a valid action for the end of a row.
- #9877: Radiated emission bandwidth is not correctly displayed in 2019.1.1
- #9884: EUT window not visible
- #9891: Table is not visible during test
- #9897: Too much limitlines in MB RE is causing radimation to get slow and hang
- #9922: Driver: AR250S1G6M1 Amplifier
- #9923: Driver: Coupler, Amplifier Research: DC7230A
- #9924: Driver: Amplifier AR5000A225A
- #9961: Incorrect bandwidth in report for CE and RE
- #10019: IF Overload is detected ESU26.