Release Notes/Solved items Version 2022.2

RadiMation version 2022.2.3

• #12600: Frankonia FC06.1 Antenna mast 1 polarization change still has problem in changing polarization
• #12928: Test equipment Monitoring tab Add/Edit/Delete buttons are not correctly placed
• #12933: Pressing cancel on the advanced option password prompt results in an invalid password error
• #13004: Check version number of LAN controlled RadiCentre
• #13011: Driver: COM-POWER ARI-6000-100
• #13012: Driver: COM-POWER ARI-1000-200
• #13013: Driver: COM-POWER ACS-250-100W
• #13014: Driver: SIGLENT SSG3021X
• #13015: Driver: Anritsu 68369A
• #13016: Driver: COM-POWER LI-3P-232
• #13017: Driver: COM-POWER AC-220
• #13018: Driver: COM-POWER AB-900A
• #13019: Driver: COM-POWER AL-100A
• #13020: Driver: COM-POWER CLA-150A
• #13021: Driver: COM-POWER PAM-103
• #13022: Driver: COM-POWER PAM-103
• #13035: Resolve compile errors of device drivers when using C++17 compiler settings
• #13036: VisaBase::GetUsedVISACommunication returns another response than expected when VXI-11 is used
• #13059: The control of the Frankonia FC06.1 controller is not working
• #13085: Configuration dialog of R&S NRT powermeter driver raises a wxWidgets Debug Alert
• #13104: How to export standards data in the report generator.
• #13107: Controlling the Schwarzbeck TK9420 LISN raises an 'Unknown SetValueID'
• #13222: EUT file doesn't show the list of performed tests
• #13224: New Driver for Bonn BLWA 0830-250/100/30D doesn't work
• #13244: Auto detect does not find Keysight MXE N9038B
• #13254: Test data is not exported when using a WHERE clause in SQL report generator keywords

RadiMation version 2022.2.2

• #4601: Report, view and compare improvements for CAL files
• #5742: Determination of % out of 6dB error after UFA calculation
• #5936: Possibility to generate a report of a calibration with Report Generator
• #8586: Milmega 80RF1000-175 amplifier is not switching.
• #9626: Driver: ETS-Lindgren 2090
• #12686: Wrong test level if order is tick checkbox/change testlevel.
• #12765: Extend Uniform Field Area (UFA) calculation to include statistical information
• #12767: Calculate statistical information of UFA calculation.
• #12769: Show the result of statistical information of the UFA calculation on the UFA result window.
• #12770: Include report generator codes to include Statistical information in the report
• #12771: Update standard printout of UFA calculation to includes the calculated statistical information:
• #12861: Milmega 80RF1000 does not switch.
• #12957: The Note and Units buttons are not shown on the UFA result window.
• #12988: The maximum tolerance of the UFA calculation is not shown if it is all below the accepted tolerance
• #12989: Wrong unit is shown at maximum deviation frequency on printout of uniform field area calculation.
• #12996: Reading a binary block buffer results in a time out when using VISA Socket communication
• #12999: N9322C Fails
• #13000: N9322C Fails
• #13002: Remove code related to HP3478A from Fluke 8840 driver
• #13003: Show the number of device drivers on the RadiWiki website
• #13092: Can the QP detector value be shown in the peak table if the QP detector has been used in the measurement?
• #13094: Columns hidden from the detected peak table are still shown in the report

RadiMation version 2022.2.1

• #512: Ability of auto detection of all connected equipment
• #4517: Auto detect connected Radi-xxx equipment
• #5750: Improve the printout template of UFA calculation
• #6170: Add support for IEC 61000-4-16: conducted immunity: common mode disturbances in the frequency range 0 Hz to 150 kHz
• #6769: Improve detection of Radi-products
• #12766: Add report button to the calibration result window
• #12768: Add configuration options for the statistical information to the UFA calculation configuration dialog
• #12816: Attenuation gain system calibration does not report the calibration level when opening the .CAL file
• #12920: Switch to new text generation engine.
• #12948: The dropdown list with pre-filled tolerances is unlogical
• #12949: The red maximum error line in the UFA graph should be using the value as specified for the accepted tolerance
• #12950: Accepted extended tolerance should not be smaller than accepted tolerance
• #12951: Also include an 'Extended maximum error' graph to the UFA calculation graph
• #12952: Selected template and report filename are not remembered after report is generated for UFA
• #12954: A default filename and location for the report of a calibration file is not provided if the TSF file of the UFA calculation was not saved
• #12955: Unclear what the numbers on the UFA calculation result are indicating
• #12956: The maximum deviation of the UFA calculation is shown with too many digits
• #12958: Optimized UFA calculation drops unexpected points