Release Notes/Solved items Version 2022.3

RadiMation version 2022.3.5

• #11073: Wrong display of "Field 11 V/m AM" for Horizontal RI Test
• #11642: Calibration file of horizontal is also used for vertical polarization of the second band
• #11895: Calculated field calibration file of the first band is used in the calculations of the other configured bands
• #12480: RI multiband measurements (V+H) - Deviation in calculated test level
• #13258: Configuring a multiband test with multiple bands testing on different polarisations result in incorrect measurement results
• #13260: Report generator error 'System.OutOfMemoryException'
• #13308: Relay Unit SC1000 not switching
• #13330: Communication error with LSProbe 2.0
• #13335: Report generator does not replace expected keywords compared to previous versions.
• #13338: The axis of the Lumiloop LSProbe 2.0 are reported in a different order
• #13342: HI 6153 raises error 3
• #13344: Raditeq driver shows ETS identifier in settings.
• #13345: Driver: Keysight U2021XA
• #13348: Driver: ETS 7002-008.
• #13352: RadiMation does not use the correct RBW when performing the final measurement.
• #13355: Rename reseller Nortelco to Adeptor AS
• #13359: Error no average probe is selected
• #13361: Word report: correctly handle text in bullits and headers
• #13363: Report generator does not insert data of a valid keyword when table data is inserted into another table
• #13386: Error while reading binary data from Rigol DSA815.
• #13412: RI multiband .Cal file File does not exist error loading an existing file.
• #13416: Report generator does not insert expected data.
• #13420: End Frequency is too high for the selected equipment
• #13439: Auto detection of Radi-products does not seem to work as expected

RadiMation version 2022.3.4

• #13331: Opening radiated immunity tests shows the peak table tab while no peaks are detected
• #13321: Report generator outputs table data with a precision of 13 digits
• #13316: Init on AR75A400 amplifier hangs.
• #13315: RTO1024 Data out of range error channel 2
• #13313: Incorrect data transfer for HP 8564EC analyser
• #13290: Increase the size of the correction file selection control to be able to show 5 correction entries
• #13171: Play a tone during the dwelltime

RadiMation version 2022.3.3

• #13332: communication error R&S ESR and radimation
• #13287: Report generator outputs table data with a precision of 13 digits
• #13253: No RadiWiki page is available for the error message of a RadiCentre
• #13234: Rohde & Schwarz ESR: data out of range settings the measurement time
• #13192: Auto detection of cards in an ETS-Lindgren EMCenter is not working
• #13189: INNCO CO3000 starts rotation to a random angle during the initialisation
• #10997: Include description of all the tabs of the configuration dialog of the RadiPower on the RadiWiki website
• #5934: 2 graph buttons on the Triplate Information window are not working
• #5025: RDM1004B (RadiCentre) probably an unknown RadiMation Error

RadiMation version 2022.3.2

• #13223: Adding a row in correction file does not show the new row
• #13010: Driver: COM-POWER AMTTC300 (turntable)
• #12947: RadiMation slows down the PC after updating

RadiMation version 2022.3.1

• #13320: Graph of amplifier compression is not scaled correctly
• #13221: Kan COM-object van het type System.__ComObject niet converteren naar interfacetype DevExpress.Utils.DirectXPaint.ID2D1DeviceContext.
• #13207: mutex error
• #13183: Improve label layout in antenna scan
• #13148: Update DevExpress to 22.1.6
• #13099: Update nuget packages
• #13073: Update DevExpress to 22.1.5
• #12972: Test status of a Conducted emission test is not set to Fail if one or more peaks are failing
• #12909: Generation of report is too slow
• #12649: Possibility to use logarithmic scaling on the Y axis needed for DO-160
• #12279: Limit line with gaps
• #11644: Update Crypto++ to 8.7.0
• #11355: Make it possible to not detect peaks between limit line gaps
• #10772: Treshold is evaluated with the unmodulated signal.
• #4430: Possibility adding 'don't care' ranges in LLF
• #4253: Easy implementing several limit lines CISPR25