Release Notes/Solved items Version 2022.3

RadiMation version 2022.3.9

• #13750: Order of the columns in the detected peak table is not maintained
• #13757: Field strength graphs are sometimes shown without the correction data
• #13773: Field strength graph is not shown correctly, seems like field probe correction is not applied
• #13787: S-Parameter test form does not show the Raditeq Q-logo

RadiMation version 2022.3.8

• #13201: Device driver: Keithley 2700
• #13242: Teseq PMU 6006 gets error during testing
• #13486: Communication issues with rotational probe positioner
• #13514: Antenna tower is moved when the amplifier linearity test is started
• #13518: Field Sensor measurement result was 0 V/m.
• #13533: FPC Fix incorrect measurements when measuring parallel detectors during the final measurements
• #13537: Radimation data storage error during test
• #13566: RadiSense 10 returns 0.0 V/m on all axis
• #13568: Which RBW is really active during the sweeps
• #13569: SAC10 - Radimation 2022.2.3 Error message at startup "Acces to the path 'C:\TSFDIR.INI' is denied."
• #13573: TDEMI G supports multiple input ports
• #13622: Object reference error when closing emission test

RadiMation version 2022.3.7

• #5616: Changing RGN output is not correctly updating frequency range
• #9965: Closing Powersensor mini-circuits PWR-SEN-6GHS panel from 'Devices' crashes Radimation
• #10330: Controlling the Mini-circuits PWR-SEN-6GHS from different threads causes crashes
• #13270: Driver: Specialized device driver for the Fluke 8845A
• #13307: Driver: Extending the RadiPower 4000 series driver to 4 kHz with additional filters
• #13340: Mini-circuits power meter PWR-SEN-6LRMS does not work
• #13387: Printing a test result, results in a word error, file not found.
• #13391: Changing the polarization of the Frankonia FC06.1 results in an error -101
• #13395: Implement blocking print call
• #13417: Configuring the Customer Database returns "This is not a valid Device Driver"
• #13423: Error after disabling graph lines in an immunity graph
• #13424: ESRP keeps max hold on screen on the device while frequency was changed
• #13430: Data lost from perfomed tests (Conducted emissions) in February
• #13431: Improve *IDN? check of RadiField 1000-series
• #13438: No error description available when device not found
• #13440: Cannot find devices using Auto detection
• #13442: Rhode&Schwarz BBA100 Interlock
• #13445: Wrong current measurement with 34465A multimeter
• #13452: Rigol RSA3030E-TG firmware not supported.
• #13453: Label impedance has caption: Caption, in S22 result.
• #13454: R&S FPC1500 Average measurement does not work.
• #13465: Span error in GTEM Single band test with Rigol DSA832
• #13466: EMPower 7002-008 reports it can be used from 9 kHz
• #13468: Keysight IO Suite reports that a VXI-11 communication is a TCPIP stream, causing errors when setting VI_ATTR_TCPIP_KEEPALIVE
• #13469: The file property information of VISA32.DLL should be logged in RadiLog
• #13471: graph scaling persistable error on start up of RadiMation
• #13476: R&S FPC1500 Decvice check fails on drivers 2023.03.08.1406
• #13479: R&S FPC1500 Take sweeps after final measurement is done on wrong frequency span on analyzer
• #13480: Error when disabling all graphs
• #13488: Timeout errors GPIB: EABO
• #13490: Overshoot of polarisation change of the Frankonia FC06.1 is not corrected
• #13494: Changing note content created at a different moment will result in saving an additional newline character
• #13495: Correctly load the user correction into the RadiSense 10 probe
• #13496: SMB100B driver accepts 4 kHz FM DEV, but warning messages are presented on the screen of the device.
• #13530: RadiSense 4 returns 0.0 V/m on all axis

RadiMation version 2022.3.6

• #13353: Automatic ticket creator e-mails are not send or are received delayed
• #13365: Remove version from resource XML tag in wxWidgets XRC files to prevent warnings on start up
• #13367: Error without description VISA: --> Timeout expired before operation completed
• #13371: RI Test stops initialization at amplifier initialization.
• #13374: Changing the configuration directory does not result in restarting RadiMation
• #13379: Possibility to ignore UNCAL error ESPI3
• #13380: Text in textbox is not replaced in word report
• #13381: When using the report generator code InsertFile an extra new line is added after the inserted content
• #13382: WPF8 + SMP2 probe does time out when requesting field
• #13405: Report generator attempted divide by zero
• #13429: R&S BBA150 Amplifier system (3 stages within 80-6000 MHz)
• #13446: Changing measurement parameters used by the analyser as power meter drivers
• #13447: Could not find visa32.dll
• #13460: Problem with Rigol DSA832
• #13362: DSA832 Error about span
• #13484: Field strenght polar plot does not dynamically scale as expected
• #13485: Add AR 75A220M3 amplifier driver
• #13486: Add AR 200W1000M3A amplifier driver
• #13491: No trace visible in Radiated Emission. (using the HP 8542E)

RadiMation version 2022.3.5

• #11073: Wrong display of "Field 11 V/m AM" for Horizontal RI Test
• #11642: Calibration file of horizontal is also used for vertical polarization of the second band
• #11895: Calculated field calibration file of the first band is used in the calculations of the other configured bands
• #12480: RI multiband measurements (V+H) - Deviation in calculated test level
• #13258: Configuring a multiband test with multiple bands testing on different polarisations result in incorrect measurement results
• #13260: Report generator error 'System.OutOfMemoryException'
• #13308: Relay Unit SC1000 not switching
• #13330: Communication error with LSProbe 2.0
• #13335: Report generator does not replace expected keywords compared to previous versions.
• #13338: The axis of the Lumiloop LSProbe 2.0 are reported in a different order
• #13342: HI 6153 raises error 3
• #13344: Raditeq driver shows ETS identifier in settings.
• #13345: Driver: Keysight U2021XA
• #13348: Driver: ETS 7002-008.
• #13352: RadiMation does not use the correct RBW when performing the final measurement.
• #13355: Rename reseller Nortelco to Adeptor AS
• #13359: Error no average probe is selected
• #13361: Word report: correctly handle text in bullits and headers
• #13363: Report generator does not insert data of a valid keyword when table data is inserted into another table
• #13386: Error while reading binary data from Rigol DSA815.
• #13412: RI multiband .Cal file File does not exist error loading an existing file.
• #13416: Report generator does not insert expected data.
• #13420: End Frequency is too high for the selected equipment
• #13439: Auto detection of Radi-products does not seem to work as expected

RadiMation version 2022.3.4

• #13331: Opening radiated immunity tests shows the peak table tab while no peaks are detected
• #13321: Report generator outputs table data with a precision of 13 digits
• #13316: Init on AR75A400 amplifier hangs.
• #13315: RTO1024 Data out of range error channel 2
• #13313: Incorrect data transfer for HP 8564EC analyser
• #13290: Increase the size of the correction file selection control to be able to show 5 correction entries
• #13171: Play a tone during the dwelltime

RadiMation version 2022.3.3

• #13332: communication error R&S ESR and radimation
• #13287: Report generator outputs table data with a precision of 13 digits
• #13253: No RadiWiki page is available for the error message of a RadiCentre
• #13234: Rohde & Schwarz ESR: data out of range settings the measurement time
• #13192: Auto detection of cards in an ETS-Lindgren EMCenter is not working
• #13189: INNCO CO3000 starts rotation to a random angle during the initialisation
• #10997: Include description of all the tabs of the configuration dialog of the RadiPower on the RadiWiki website
• #5934: 2 graph buttons on the Triplate Information window are not working
• #5025: RDM1004B (RadiCentre) probably an unknown RadiMation Error

RadiMation version 2022.3.2

• #13223: Adding a row in correction file does not show the new row
• #13010: Driver: COM-POWER AMTTC300 (turntable)
• #12947: RadiMation slows down the PC after updating

RadiMation version 2022.3.1

• #13320: Graph of amplifier compression is not scaled correctly
• #13221: Kan COM-object van het type System.__ComObject niet converteren naar interfacetype DevExpress.Utils.DirectXPaint.ID2D1DeviceContext.
• #13207: mutex error
• #13183: Improve label layout in antenna scan
• #13148: Update DevExpress to 22.1.6
• #13099: Update nuget packages
• #13073: Update DevExpress to 22.1.5
• #12972: Test status of a Conducted emission test is not set to Fail if one or more peaks are failing
• #12909: Generation of report is too slow
• #12649: Possibility to use logarithmic scaling on the Y axis needed for DO-160
• #12279: Limit line with gaps
• #11644: Update Crypto++ to 8.7.0
• #11355: Make it possible to not detect peaks between limit line gaps
• #10772: Treshold is evaluated with the unmodulated signal.
• #4430: Possibility adding 'don't care' ranges in LLF
• #4253: Easy implementing several limit lines CISPR25