Release Notes/Solved items Version 2013.1

RadiMation version 2013.1.26

• #3394: Radimation crashes during the init of during the test
• #4332: Not possible anymore to copy the peak table to the clipboard
• #4729: HP8342E measures only one sweep instead of 5 per frequency band
• #4742: R&S ESU 8 device driver files are missing
• #4810: Error no device driver selected for cable
• #5146: R&S HCC antenna tower timeout error
• #5178: Adjusting bands during Multiband configuration should be more intelligent
• #5180: Creating a TSF sub directory with insufficient file permissions raises run-time error 5
• #5181: No description or TSF file name is visible during Multiband testing
• #5186: Multiband immunity has problems with power regulation if regulation starts on -100 dBm
• #5187: Test continues without an error even if the RadiTurn cannot turn the table to the correct angle
• #5188: Configurable AD converter options has disappeared
• #5198: Adjust RGN drivers to have a fixed minimum carrier level setting of -70dBm

RadiMation version 2013.1.25

• #5107: Driver HP 59306A switch matrix
• #5111: Driver: Agilent 34401A Multimeter
• #5153: R&S ESIB40 Not all bytes are written to the GPIB-Board within the timeout period (GPIB:EABO)
• #5166: Report filename is using a filename with a lot extension
• #5167: Polar plot graphs are included in the report when a frequency based emission graph is requested
• #5197: Extend RGN drivers with an additional check for carrier level and state

RadiMation version 2013.1.24

• #1905: Pasted information of standard is not always stored
• #2773: Pressing delete on engineer window does not give the additional are you sure window
• #2815: Combo box in EUT information list does not update its dropdown box size based on the content
• #3096: X-axis grid lines at graphs starting at 10 Hz are not correctly calculated or drawn
• #3232: Default log in test engineer can not be turned off.
• #3271: Questions to "Login-Procedure"
• #4208: Repeated hangs when ESU used as powermeter
• #4237: No extension created
• #4521: Enhanced Status Window up down triggers Unhandled exception
• #4536: Unhandled exception for object name icon
• #4644: RI Singleband Fixed Field cannot use a 1 Hz step frequency from 80 kHz to 1 GHz
• #4717: Pass button is vanished when Surge test is started
• #4737: Report Generator: Could not copy template error
• #4738: Cannot close the EUT with PI test
• #4767: Note information is replaced with default note
• #4794: Crash in calibration mode when repeat previous test is used
• #4801: Cannot access a disposed object when canceling fixed power test
• #4814: Unhandled exception when empty snapshot is exported
• #4815: Printing LLF doesn't work
• #4847: Unhandled exceptions or Not Responding after GTEM test
• #4869: RadiCentre error The connection for the given session has been lost
• #4914: Engineer name change is not saved but will duplicating this Engineer
• #4919: Error loop when saving a new LLF with insufficient engineer rights
• #4923: Ok button of note screen is opening a new note screen
• #4940: Items names for standards are not visible
• #4966: Unhandled exception when starting RI fixed power test
• #5045: Cancel button of note screen is needed to be pressed twice
• #5058: Start frequency of < 0,0001 MHz is not retained from TSF and automatically changed to 0 Hz
• #5115: Unknown error when writing a test file
• #5128: RadiMation ignores AT device driver (software) limits and TSF limits
• #5143: Errors Gain compression and Harmonics tests
• #5148: Milmega AS0840-100/100 Amplifier can't be remote controlled

RadiMation version 2013.1.23

• #3834: If overload check for receiver, not scanning receiver
• #4212: Adjustments (advanced) settings have no effect with calibration power sensor (4418)
• #4372: Test information time is incorrectly set
• #4739: Report Generator: time, date and special character is wrong
• #4820: Test data can't be opened, error 'No data document could be created for the test identifier'
• #4897: RadiMation is not responding when the Database connection location is opened
• #4935: Driver R&S unit SCIU
• #4960: Frequency settings are hidden and not usable anymore in manual mode
• #5050: Manual mode frequency adjustment (arrow button) is pressed multiple times
• #5056: During test it is not possible to add or remove graph lines
• #5057: Settings to change graph line colors are not retained
• #5070: R&S SMA 100 device driver check crashes RadiMation
• #5073: R&S HCC should read a limit during a check to ensure that the correct device is connected
• #5074: Word report generator can cause an exception caused by delayed unloading
• #5076: Graphs button is disabled during a multiband immunity test
• #5106: Driver: Schaffner/Chase CBL6111D antenna
• #5108: Driver: HP 59307A switch matrix
• #5109: Driver: AR 1000LM24 Amplifier
• #5110: Driver: AR 500W1000M3 Amplifier
• #5120: Error from RadiPower is not correctly reported
• #5122: Driver: R&S unit SCIU switch matrixes
• #5124: RPR2018C timeout errors
• #5130: RadiPower can become suddenly unresponsive
• #5131: Incorrect resizing is causing unreadable items RPR3006W
• #5132: Wrong times are shown in the eventlog of a calibration
• #5134: RadiTower stays in Remote after test is closed
• #5135: Control of the RadiTower enters an endless loop
• #5137: The field sensor device driver configuration should be extended with 'Monitoring measurement settings'
• #5138: Add possibility in the Maturo device driver to select the device unit
• #5139: Driver: R&S FSEA as powermeter
• #5145: Wrong ranges of Holaday HI 4433-MSE field probe
• #5147: R&S unit SCIU Amplifier isn't going to operate

RadiMation version 2013.1.22

• #4059: Axis selection for the FI7000
• #4584: Signal generator HP 83752A is not set for modulation
• #5119: Report generator code: FORWARD POWER LIST is not exporting any data

RadiMation version 2013.1.21

• #3220: Scaling of the Tsf selection window
• #4593: Driver: EMR-300 does not check Battery status
• #4744: Measurement is done in dBm with Antenna Terminal selected , when MIL STD 461E specifies the limit in dBuV
• #4909: After measurement no result(s) are shown
• #4994: R&S SMA 100A Invalid buffer mask specified
• #5040: Wrong graph scaling cuts off measurement results after test and RG
• #5066: RS ZNB-40 command and remote Queue overflow errors
• #5100: Communication problem with R&S SMC100A (via USB)
• #5101: ODBC database is not remembered and set to ACT again
• #5102: RMS value in Powermeter burst measurement is not corrected
• #5113: Test Equipment is set to 'none', but was correctly selected before test

RadiMation version 2013.1.20

• #2848: Regulated testlevel should be above requested testlevel if testlevel could not be regulated within the tolerance
• #4910: Closed loop electrical field regulation is always assuming a linear system
• #5033: Driver: Tilt Antenna Mast TAM 4.0-P and a NCD controller
• #5036: Not all limit lines are shown in an emission test
• #5063: Power delivery test is extremely slow

RadiMation version 2013.1.19

• #4843: Envelope trace mode for a RadiPower is not working anymore after a Burst mode measurement
• #4929: Driver: R&S HCC turntable + absorbing clamp controller
• #4996: Last bursts in a powermeter burst graph is showing a higher value
• #4999: Long burst measurements with the RadiPower will result in not enough memory errors
• #5061: Invalid buffer mask Agilent N9010A Scanning Receiver over USB (VISA Alias)

RadiMation version 2013.1.18

• #1368: Use blanking input for SMY02 PM modulation
• #4062: R&S SMY-01 input blanking for pulse modulation
• #4255: Driver: strange VBW value is set
• #4256: Calibration asks for resistor and shows voltage level
• #4260: Measuring deviations despite correct .CAL
• #4267: Starting Level Signal Power can trigger RF power on without interlock
• #4273: Power meter is read continuously with modulation applied in Manual Mode
• #4547: Setting the reference level has no effect on the ESMI
• #4548: Can select only one peak at the time
• #4592: Powermeter virtual instrument is not always unloaded from memory
• #4616: MXE alignment issue and is not released from remote
• #4842: Graph lines from a previous VI Powermeter window are still shown under the 'Graphs' button
• #4932: Driver: Injection device FCC F51
• #4992: Configure a maximum of 360 degrees for a Manual Controlled Turn Table
• #4995: Customization of the Graphline color in the Powermeter window is not working
• #5008: Dropdown of the threshold level for a burst test is using an unlogical order
• #5022: Innco CO3000 is started at 100cm instead of 90cm
• #5037: RG error when requesting the Equipment Table information
• #5047: Pulsed Immunity explanation
• #5054: Mil Std CAL text is not completely visible
• #5059: Innco CO3000 control multiple devices with one GPIB address without addressing
• #5064: 18-channel AD-convertor device driver for the RadiSense to be used during justation
• #5067: Agilent 8753ES can't change GPIB address

RadiMation version 2013.1.17

• #4944: Extend R&S ZNB driver to be used during antenna calibrations
• #5028: R&S SME: Use fixed attenuator mode to reduce attenuator relais switching

RadiMation version 2013.1.16

• #2541: RF setting of the marconi 2023 does not check for errors
• #4352: Driver: device driver check Marconi 2022 (ID1343) doesn't check anything
• #4594: Limited Signal power is never adjusted anymore in Multiband
• #4905: Test data of some previous versions are corrupted and can't be opened anymore
• #4930: Driver: Bonn amplifier BLWA 0810-400
• #4936: Changing AT polarization does not seems to work
• #4954: Where to define Cables for the EFT testing
• #4967: How to configure switch matrix changes
• #4968: Driver: HI4433LFH Holaday field probe
• #4969: CANoe interface object not initialized correctly
• #4970: Marconi 2023/24 error: Measurement using PM is not possible
• #4972: AR FP3000A is not responding
• #4973: RadiSense CTR1001A IV error unknown command
• #4976: Stop button doesn't work in Network Analyser system calibration
• #4977: Report generator raises index error for S-parameter test
• #4978: Export of graph data to excel is not using the correct comma
• #4979: Phase information is not retrieved from the R&S ZNB
• #4982: Driver: Amplifier Research AT4510
• #4985: Driver: AR 60S4G8
• #4986: Driver: AR 40S1G4
• #4987: Driver: 350S1G4
• #4993: Calculate the RMS value of a Burst measurement
• #5020: ESI26B Spectrum Analyser Query unterminated error
• #5021: R&S ESIB 40 receiver Query unterminated error
• #5023: SMY-01 PM with ext blanking
• #5024: Option window to Enable software configuration EMCO2090 is not shown anymore
• #5030: R&S SME: Device driver should use 0.01 dB Output resolution

RadiMation version 2013.1.15

• #1680: The resolution for the reflection coefficient should be increased from 0.001 to 0.0001
• #2232: Device driver to control the R&S ESI(B) series analysers/receivers over LAN
• #2758: ZVK measuring times are not inserted in side the machine, it is always 1 sec.
• #4041: Antenna mast Frankonia FC 02 not working
• #4324: Error Advantest TR4172 not all bytes are written to the GPIB
• #4464: Driver: tracking generator R&S ESPI3 receiver with option FSP-B9
• #4554: R&S ESPI7 ethernet communication
• #4658: Network analyser measurement: Swap noise and full through measurement
• #4659: Network analyser measurement: Support Full 1 port measurment, which only measures a single port
• #4687: Strange graphs are included in the report if the frequency has been changed to an already tested frequency in RI Single band manual mode
• #4689: Emco 2090 is controlled with an offset
• #4804: Simultaneously remote control LISN ESH3-Z and use Spectrum Analyser of R&S ESAI/ESMI doesn't work
• #4904: No graphical display of results and no results are stored
• #4911: Help Technical Support items are not working
• #4912: Advantest TR4172 is not using Video Average detector
• #4913: Wrong dates are shown in the EUT window
• #4915: Antenna tower limits are not retained for the EMCO2090
• #4917: Driver: R&S ZNB 40 Network analyser
• #4918: RadiSense 4.51 probe is not correctly detected
• #4920: Configuration of magnetic field substitution test level is problematic
• #4921: Unhandled exception after finishing RI substitution tests
• #4922: SMA100A not working correctly
• #4925: Powermeter measurement with the R&S FSP below 300 Hz measures the zero feed through signal
• #4927: Driver: pre-amplifier Teseq LNA 6901
• #4928: Driver: pre-amplifier R&S AFS
• #4931: Driver: Injection device Mess Electr NNBM8125
• #4937: StandardDetails window is not automatically resizing
• #4939: Default Address Information screen text is cut off
• #4946: Text in Calibration Import window not completely visible
• #4949: Does RadiMation support time domain scan
• #4951: Is it possible to use a calibration file at 20vm to generate a field of 3vm
• #4956: How can we run 5.8.38 and 2013.1.15 on the same PC
• #4957: Files generated in 2013.1.15 are not readabel in 5.8.38
• #4961: How to add attenuators for calibration
• #4971: How and with which RM version can we control the power meter RPR3006P?
• #4980: The 'number of sweeps' setting in a network analyser test is not working

RadiMation version 2013.1.14

• #693: There is no logical order in the selection of the controls, if the selection is moved with the 'TAB' key
• #3235: Cancel button in report generation is not cancel but skip
• #4047: First point from final measurement is not measured correctly
• #4112: Final measurement at wrong frequency
• #4202: HI field probe readout raises errors
• #4216: Incorrect QP measurement on first peak measurement
• #4287: Mast sometimes doesn't move with HD100 antenna controller
• #4414: Maturo NCD no VISA available
• #4669: Disable the spell checker during the generation of the report
• #4710: Only the first line from NOTE is showed in test list
• #4736: RG: Object reference not set to an instance of an object
• #4746: First Measured Peak is not correct with R&S ESVS 10 / ESHS 10
• #4793: Driver: Apsin 6010 Signal Generator
• #4818: Add direct link in Menu Help for 'Latest device drivers...'
• #4876: RunMacro(AutoFitThisTable) is auto fitting the wrong table
• #4877: Agilent 4440A is not working correctly in an attenuation/gain calibration test
• #4878: HP8542E is resetted twice during the initialization
• #4880: RadiGen doesn't always activate the AM modulation
• #4881: Driver: GPIB and VISA support for the AnaPico APSIN signal generators
• #4882: Detector measurement time is not correctly set in the PMM9010
• #4886: HI-4450 probe error without description
• #4887: Accents and special characters are replaced with question marks icons
• #4889: Endless loops Maturo NCD AT after communication is out of sync
• #4890: Position Maturo NCD AT is not alway set exact by driver
• #4891: Maturo NCD TT minimum step size of 3 degrees
• #4893: VISA (GPIB) controlled RGN error Invalid buffer mask specified
• #4894: RadiMation Free can't connect with RPR Power meter

RadiMation version 2013.1.13

• #1085: Field measurement during CI testing
• #2657: A graph of an AD-Input should auto scale the y-axis to also show the limits that are relevant for the AD-Input
• #2853: Multiband Report generator code for an ad-channel should also be available as a pre-determined code
• #2904: EUT ad channel monitoring scale is wrong, no information is displayed.
• #3031: AD Graph 1 does not work in multi band
• #3236: Max limit is not viewable when all the measurements are above the limit
• #3564: R&S ESVS device driver should be updated to use double parameters
• #3867: Net power and calculated current on the CAN-bus
• #4167: Power meter driver for fsiq / FSEK and fsp
• #4171: Report generator: keyword for step frequency is not working
• #4460: RadiCentre (RadiTower) errors
• #4582: Wrong peak is measured with final peak measurement selection
• #4615: Error 'Settings conflict: step size clipped to nearest value allowed'
• #4622: Error printout ||MAX HOLD PEAKS GRAPH||
• #4642: Modulation settings are not correctly saved
• #4675: Graph keyword gives 'Object variable or With block variable not set' error
• #4682: Selected peaks do not match with selected peaks in the peak table
• #4711: Peak zoom-in is not working correctly if a limitline file is specified
• #4728: All peaks above the limit dB value is not retained
• #4745: RadiMation shortcut should have version number
• #4753: HP8542E Receiver is measuring only one sweep and only one band
• #4764: RadiCentre problems
• #4824: Setting conflict error with a Agilent Scanning Receiver
• #4859: RadiPower misses the last part of a pulsed signal
• #4864: Driver: EMGen 7003-001
• #4865: Controlling a RadiGen is raising a dialog with the message: Operation is NOT completed
• #4868: Remaining test time is shown in 12:04:30 AM notation
• #4870: Installation on a PC cannot be completed due to network location configuration
• #4871: Limit values of ad-channels are not used in the scaling of the ad-channel graph
• #4872: Installation of drivers.exe generates an error regarding registration of RADCANoeWrapper
• #4879: How should the magnetic field antenna factor be specified?
• #4883: Wrong readings during conducted immunity fixed current test
• #4888: RadiCentre (RadiTower) timeout expired before OPC
• #4895: Driver: RSS1006A Device Not Connected
• #4896: RSW1021N and RSW1024S errors 'Not all bytes are written to the GPIB board within the timeout period'

RadiMation version 2013.1.12

• #4108: Report generator keywords for final measurement
• #4743: Driver: no communication and motor not moving with Emco 2090
• #4813: RM crashes during search of DARE products
• #4822: Unit for currentprobe is not set to dBuA, but remains dBuV
• #4837: Initializing a powermeter while on the envelope or burst mode tab, is not working correctly
• #4844: Changing the sample rate for the RadiPower in envelope trace mode is not working, if 1E+3 notation is used
• #4857: RadiPower RPR3006P measurement should be corrected for the Modulation bandwidth that is used by the EUT
• #4866: Antenna tower goes down to hard limit and gets stuck

RadiMation version 2013.1.11

• #4406: No coupling available with Synergy database
• #4817: Menu Help > Suggestion URL is opening DARE homepage
• #4819: Continuity between LLF and COR
• #4848: Error message when printout a Multiband test
• #4856: IF overload detected error with R&S ESU 8 EMI

RadiMation version 2013.1.10

• #4242: Issue measuring time setting in MB
• #4269: Settings (RBW) differ in comparison with measurement results
• #4541: Driver: Bonn amplifier BSA 0125-125
• #4596: Problem with PMM in latest version
• #4716: Reference Level is not correctly set during final measurement
• #4718: COR file graph is not correctly drawn
• #4750: RadiMate AD converter is not working
• #4752: PMM 9010 timeout errors
• #4754: EMCO 4825/2 LISN error Start frequency was too low
• #4758: Detector Keywords for report generator template
• #4759: PMM is not detecting that it isn't getting any real data
• #4763: PMM 9010 Error detected during start sweep measurement
• #4765: RI Uniform Field Area calculation form
• #4766: Frequency Change Mode configuration button is not present
• #4781: Driver: Agilent N5171B Signal generator
• #4782: Driver: AR 1000W1000D amplifier
• #4783: Driver: AR 2500A225 amplifier
• #4785: Configuration to remote control RSW1002E on 12V
• #4786: Not possible to printout a MB test
• #4791: RI Fixed power test in a sequence doesn't remember that a frequency list should be used
• #4798: R&S ESAI EMC receiver
• #4803: Move and Turn during measurement settings are disappeared
• #4807: RDM1004A with RadiCentre 1 is not connecting
• #4816: Driver: Wandel & Goltermann EMR-10 + EMR-11

RadiMation version 2013.1.9

• #4285: Can't change order of the frequency band (MB) for sequence testing
• #4606: Merging graphs is loosing correction
• #4695: Removing an information item, selects an unlogical next information item
• #4704: Test window opens to large for the screen; buttons are not visible
• #4721: Exit from a multiband test requires two clicks on Close button
• #4722: Advantest R3361B Analyser event timeout
• #4723: Graph lines are not correctly enabled and disabled
• #4735: 4446A preselector is searched when deselected in driver settings

RadiMation version 2013.1.8

• #1534: Large System fonts will make menu labels unreadable
• #4250: Text is not readable in Final peak measurements frame
• #4374: .NET: crash during continuous powermeter readout
• #4415: PMM OR03 communication issue
• #4451: New default installation on Windows 7 is not able to write to the CONFDVDR directory
• #4453: No quasi-peak detector with Analyser N9000A
• #4468: Window Client Logo: install to the correct folders by default
• #4478: Driver: Signal generator Wiltron 68369B (10M - 40GHz)
• #4480: Driver: Field probe Chauvin-Arnoux EF2A
• #4490: Driver: Agilent N9010A Signal Analyser Scanning Receiver
• #4527: Driver: EMI average detector setting
• #4543: Strange Quasi-Peak measurements with Agilent N9000A
• #4573: Printing the graph in the Powermeter Virtual instrument raises an error
• #4608: Correction of the powermeter in Burst mode
• #4609: Customization of the graph is not remembered for the burst test
• #4618: ESU with two bands and one sweep is not performing measurement
• #4628: First point ADC measurement is sometimes wrong
• #4632: Number of sweeps to be taken is not visible on small screen
• #4640: An object reference error is raised when open ESD test
• #4645: CE Multiband hangs when first band is using different trace detectors compared to second band
• #4646: CE Multiband keeps repeating the last band
• #4650: Graph control is always showing logaritmic
• #4653: Not possible to use CTR+A inside Note option in TSF
• #4678: setup program is aborted when .NET framework is going to be downloaded on a german pc
• #4691: Surge status window, doesn't show Pass/Fail option
• #4694: Possibility to remove multiple 'Information items'

RadiMation version 2013.1.7

• #4095: Before action is deleted after the test has finished
• #4425: Long delays between multiple tests in a very large sequence
• #4515: Error during zeroing of RadiSense
• #4532: Limit Lines displayed outside graph in report
• #4610: Driver: D.A.R.E!! Instruments RPR3006P
• #4614: Limit lines overlap the legend
• #4619: Driver: ETS HI-2200 Field Probe
• #4623: Cannot use R&S NRPZ51 above 6 GHz
• #4624: No coupler device driver is present for the internal coupler in the AR20ST1G18A
• #4627: Driver: ESPI3 receiver is not set to reference level from TSF
• #4629: In some specific situations the wrong test files are deleted
• #4647: Stopping an emission measurement with a R&S ESI, very often generates an EABO GPIB Error
• #4648: Driver: Anapico APSIN20G
• #4671: Driver: Agilent 4418B
• #4672: Insert specific attachements for report generator
• #4673: Driver: Agilent N1914A
• #4683: Driver: Prana AP32 MT225

RadiMation version 2013.1.6

• #4604: R&S ESI as powermeter takes a very long time to measure 20 Hz
• #4603: TSF is marked as changed, even if nothing is changed
• #4602: Customization of the graphs restored to the default if 'Use this as default' is presssed
• #4600: Adjust the amplifier protection
• #4583: System calibration Attenuation / Gain Unhandled exeption error
• #4581: Frequency unit in the limitline configuration seems to be specified in Hz, but is interpreted as MHz
• #4580: Changes in the unit of a limitline are not directly updated in the grid with limitline values
• #4579: Limitlines with a dBpT unit are still shown as dBuV/m limitlines in a multiband emission test
• #4578: Limitlines configuration window doesn't show very small/big frequencies
• #4577: Multiband test is not able to change to the next testsite due to frequency limitations in the testsite
• #4501: H-Field with no measurement data
• #4500: Receiver is set to wrong reference level
• #4378: Error Software Protection Key when upgrading software
• #4371: Higher value then 1000 is not displayed in COR file
• #4285: Can't change order of the frequency band (MB) for sequence testing
• #4278: Crash during initialising R&S FSH6 Scanning Receiver
• #4169: AD Channels are swapped
• #4146: Changed sorting of AD channel configuration is confusing AD Convertor readout
• #4057: Copy to clipboard is forgetting the last item
• #4031: AD-Channels are changing after saving EUT
• #3455: Error message is displayed when changing from lower band to higher band with different equipment
• #3124: Double clicking the main window for reviewing the test sometimes opens a different test
• #2285: Port RadiMation to modern development tools (.NET)
• #708: new file is saved while No is selected.

RadiMation version 2013.1.5

• #4569: Reading out a powermeter in Free mode, is using maximum CPU load

RadiMation version 2013.1.4

• #4585: Possibility to dump the waveform of a LeCroy oscilloscope to a CSV file
• #4574: ESIB 26 preamp settings are not used
• #4536: Unhandled exception for object name icon
• #4535: Setting the preamplifier to 0 dB doesn't seem to be remembered
• #4533: Resizing main EUT test data columns is not correctly done
• #4504: Looping device check
• #4428: Error with ESI40 as powermeter
• #4396: Administrator password is unexpectedly changed/corrupted
• #4337: TDEMI soft-reset
• #4336: Abort scan on TDEMI
• #3573: Amplifier control panel can not be resized so you can see the complete status message
• #3304: Driver: AR 350AH1 (GPIB + USB)

RadiMation version 2013.1.3

• #4330 RI-SB manual mode, some texts are partly hidden
• #4529 Buttons are aligned on the right side, not very close to the other controls on the window
• #4444 .NET: cosmetic changes to setting windows
• #4368 not completely readable receiver settings should be extended
• #4249 .NET: window dimensions of settings can be completely resized

RadiMation version 2013.1.2

• #4513: The cancel button is not responding on the environmental window that is shown during the initialization
• #4512: Graph and table controls are not correctly initialized
• #4511: A 'Save As' dialog is displayed when the Powermeter window is closed in RadiMation Free