Release Notes/Solved items Version 2015.3

RadiMation version 2015.3.6

• #4575: Connecting another RadiPower Virtual instrument when another RadiPower is continuously measured, corrupts the data of the continuously measured RadiPower
• #5455: Error wrong argument during Burst test
• #5471: Burst measurement Unhandled exception Object reference not set to an instance of an object
• #5876: App. Note 100: Enhanced Status Window usage and description included in the manual
• #6095: Driver: Bonn Elektronik BTA 0122-3000
• #6251: R&S ESR7 specific System Error: -222 Data out of Range DISP:TRAC:Y:RLEV:0.0103DBM
• #6312: Timeout in communication with R&S ESPI after QP measurement
• #6441: Frankonia FC is raising an -101 error during test initialization
• #6473: Cannot access a disposed object frmVIPowerMeter
• #6623: Driver: Frankonia ECU-3 / ECU-6
• #6713: Driver Keysight 33521B Signal Generator
• #6714: How can to get some specific trace data in the graph?
• #6865: Implement retry of Software Update used for RadiField amplifier firmware updating
• #6878: Comm failed with Powersensor PMM6630
• #6888: Driver: Rohde & Schwarz ESR 26
• #6890: Reportstatus of Kom ik hier? is shown during RPR3006W
• #6898: EventLogData in list controll to be made possibly visible in RadiMation.
• #6899: Event Window
• #6913: EUT window is not correctly sized on 1024x768 beamer
• #6939: Lasercode to activate the RadiSense fieldsensor laser inside the RadiCentre
• #6942: Configurable AD-Convertor for asynchronous data
• #6592: Update to .NET 4.6.1
• #6954: Prana AP32DR312 amplifier serie is infinitely polling status when warnings are returned
• #6962: Configurable AD Convertor device driver cannot interpret multiline result
• #6965: Add ability to return the RAW AD Converter value

RadiMation version 2015.3.5

• #2848: Regulated testlevel should be above requested testlevel if testlevel could not be regulated within the tolerance
• #3962: A limit in a Multiband CI test is only checked when power is limited by amplifier limitation
• #3963: Ramp method in CI Multiband doesn't remeasure the generated voltage
• #4264: Field level is less than set
• #5371: Initialization of Prana AP32 DR216 Amplifier is always successful
• #5978: Driver: Prana DT70D Amplifier
• #5988: Driver Teseq ITS6006 for IEC61000-4-3 & CISPR11 as Signal Generator
• #6134: Driver: Teseq ITS6006 for IEC61000-4-3 & CISPR11 as Power meter
• #6214: Driver: Prana DP600 amplifier
• #6253: Driver: Prana DT70S amplifier
• #6288: Driver: Prana UX55 amplifier
• #6318: Driver: Prana SV70D amplfier
• #6319: Prana LT320D amplifier doesn't work
• #6358: RadiField and RadiGen doesn't switch to local at the end of a test
• #6374: Driver: Prana MT700 amplifier
• #6396: NI DAQ USB 6218 AD Converter read values are delayed
• #6425: Driver R&S NRP-Z91 controlled by SMB100A using USB
• #6460: Driver: Prana MT400 amplifier
• #6489: Check if the HI-6005 fieldprobe is working correctly in combination with the EPI1001A
• #6625: Driver: Frankonia EFS-10 / EFS-100
• #6641: Driver: Control the polarization on the antenna using an RadiCentre external relais card
• #6662: Virtual Instrument for the field strength sensor
• #6712: Switch the external 40 dB attenuator used with Keysight 33521B
• #6777: Amplifier Linearity / Uniformity test different result at 1 -6 GHz
• #6787: Agilent 4403B Spectrum analyser Device Not Connected error
• #6863: Explanation for the use of correction factors for a Current sensor
• #6864: DVDRSYS.DLL cannot be loaded anymore from new device drivers
• #6886: Driver: Bonn Elektronik BLMA 4060-40
• #6901: How to create a correction factor using the unit of transfer impedance in dBOhm
• #6909: Why is a window with a description and value text is shown during the test?

RadiMation version 2015.3.4

• #1151: Minimum performance level fixed field
• #1881: Graphs for applicable signal/forward/reflected/net power need to be added if a related input is measured
• #1945: Generated Power in Multiband immunity is not limited by the allowed range that is configured the AD Channel
• #2869: Multiband test does not allow the user to select only the reflected power meter as an input
• #3605: Multiband minimum performance is not possible
• #4090: RI multiband minimum performance not working
• #4576: Auto ranging of the HI422 is not working correctly
• #4821: Driver: Tektronix 3000 for fixed voltage test
• #4873: Wrong reading of TDS 3054B scope
• #5323: Pre measurement detector suddenly turns other detectors on or off
• #5572: Use maximum performance level as new start level at next frequency
• #5880: Button to show overview of Calibration Expired (activated) devices
• #6125: Possibility to set the used type of average detector
• #6163: Configurable AD converter measurement always returns zero
• #6233: Control the oscilloscope Tektronix TDS 2000 Series by USB
• #6268: Specify CW instead of NONE, if no modulation is applied
• #6385: Add report generator keyword which only outputs the date
• #6631: Driver Polarization of the RadiField
• #6640: Driver Configurable antenna tower device driver to control polarization
• #6712: Switch the external 40 dB attenuator used with Keysight 33521B
• #6716: How to configure the increase of the power during regulation?
• #6731: Allow that the available columns for the device driver can also be selected in the testsite configuration window
• #6737: Driver RadiField 2003A/2006A/2003B/2006B
• #6738: Windows 10 USB drivers for Radi-products
• #6739: Hide the white area in the Virtual Instrument window
• #6742: Agilent N9038A Average measurements taking longer than expected
• #6762: Ability to select another detector in the R&S ESI powermeter
• #6763: Using the R&S ESI 40 scanning receiver as a powermeter raises the error "BAND:MODE:FFT OFF"
• #6764: Tektronix AFG 3252 Timeout while waiting for *OPC command
• #6770: RadiField errors from the RadiCentre are not raised
• #6771: RadiField Polarization driver should have 'ignore height change' ticked by default
• #6774: R&S NRP-Z55 returns a -10000 dBm value when the powermeter returns a 'NaN'
• #6779: How to perform a Radiated Immunity MB threshold level test
• #6789: VSWR testlevel is not shown in the TestLevel inputs box
• #6794: Multiple tests with same TSF name difficult to include in RG
• #6801: Graph customization settings are not used during printout
• #6806: A lot of 'Handles' are used by RadiMation
• #6809: Can't find device driver for RadiField 1009B
• #6812: Add new Reseller to the Sentinel Key program for Dongle programming
• #6819: Tektronix TDS2024 is not correctly controlled
• #6835: Can deleted measurements be recovered by RadiMation?
• #6836: Is Windows 10 supported?
• #6838: How to see more details of the tweeted improved RadiMation functionalities?
• #6848: RPR3006W is not showing powermeter values when used as virtual instrument
• #6858: RadiLog ReportError should include the RadiMation global event log of that process
• #6867: Is it possible to add more than one amplifier to a test site?
• #6881: Is the device driver for the R&S NRP-Z51 powermeter available?

RadiMation version 2015.3.3

• #2550: Menu option that starts NI I/O Trace
• #5091: Debugging of device drivers through DDLOGGER.DAT should be simplified
• #5693: Driver: Agilent E7402A Spectrum Analyser
• #6008: Possibility to temporarily disable system error checking in a device driver
• #6119: Error that the frequency of an already used testsite is not suitable
• #6384: How to use the R&S ESCI 7's built-in pre-amplifier in 30MHz-1Ghz range
• #6400: Driver: IFI ST181-10 Amplifier
• #6435: Is it possible to change a correction of an already performed MB emission test?
• #6445: Keywords ||DATE MEASUREMENT|| and ||SETUP TYPE|| do not work anymore
• #6447: Slow powermeter measurement of the R&S NRP Z91
• #6533: PDF version of the RadiMation manual is 55 MB
• #6551: Enables users to easily send Error Reports with RadiLog
• #6553: Add RadiLog messages to the R&S NRPZ powermeter device driver
• #6567: Include a menu entry in the main menu to start the RadiLog
• #6597: R&S NRP-Z91 cannot be used in Powermeter Virtual Instrument
• #6598: Checking a R&S NRP-Z91 takes forever when it is not connected
• #6608: Add RadiLog messages to the USB HID device stream
• #6653: Sending an error report causes an error report
• #6655: Output parameters are not shown in RadiLog
• #6658: Updating Error Report Window
• #6659: Added button to ReportStauts error in RadiMation
• #6666: Driver Teseq PMU 6006 powermeter
• #6721: Not possible to measure the average field probe value during Multiband
• #6722: RadiLog crashes with a 'startIndex cannot be larger than length of string'
• #6778: More lines are included in the graph in a report than requested
• #6784: “hot-key” to export the numbers from the harmonics + linear graph EUT-Calibration module
• #6823: Do I need correction files in RadiMation for powermeters?

RadiMation version 2015.3.2

• #1106: Directory names in the configuration should be shortened if they don't fit in the listview control
• #2731: Address information of the customer, manufacturer and test-site should be able to be copied from or pasted to the clipboard
• #2860: The amplifier control window is displaying nothing if no items are inserted
• #4538: Turn during measurement explanation
• #4805: Data export from menu REPORTS-EXPORT is not working
• #5692: Driver: 3115 Double-Ridged Guide Antenna
• #5877: Proceed to include some proposed wiki pages for inclusing in manual
• #6071: Very slow band switching in Multiband Immunity (Levelling problem of Power Delivery Test)
• #6277: The 'cancel' button should not be shown when an engineers is removed
• #6283: Broadband units (like dBuV/m/MHz) are not possible for traces
• #6438: Default frequency range of the EMCO / ETS-Lindgren antenna 3117
• #6512: Use the Microsoft Visual Studio 2015 compiler
• #6521: Amplifier Linearity test requires an antenna in the selected testsite for Conducted Immunity
• #6546: New device drivers is raising Description for this error is not available error 536879923 during startup
• #6548: Minimum supported Windows version should be changed to Windows 7 SP1
• #6585: NRP Z55 zero operation took longer than 60 seconds error
• #6588: RegisterDeviceDriver too slow. It takes a second.
• #6605: Is the Ines USB-GPIB-2 card supported?
• #6606: Is the Prologix GPIB convertor supported?
• #6610: R&S ESRP 7: Not all bytes are written to the GPIB-Board
• #6645: How can I set the resolution to logarithmic stepsize?

RadiMation version 2015.3.1

• #3324: Linearity check for calibration (16 points, 5.1 dB down)
• #4690: Language error: initialisation successfull <=> successful
• #4772: Add a 'Pause' as a possible action
• #5004: A warning should be shown if the AD-Channel maximum and minimum are the same
• #5250: Change format of graph export per default
• #5513: Directories configuration of latest version is interfering with older RadiMation version
• #6168: Harmonic Graphlines have unlogical names
• #6190: Add a general notification icon on all the Multiband configuration windows
• #6193: Change the 'Change' button to 'edit' including a picture button.
• #6196: The Version number in the shared Libs DLL's are not updated
• #6197: Add a 'Remove' option in the right click menu of a device in the TestSite configuration window
• #6201: The table with measurement data is not shown when the Harmonic test data is opened
• #6242: Adding a 3rd amplifier to the amplifier control panel does not update the amplifier control panel correctly
• #6292: Rename tabs on the testsite configuration: 'Standard 1' to 'Devices 1' and 'Standard 2' to 'Devices 2'
• #6300: Enhanced Status Window parameters are not shown
• #6326: Add more low baudrates: 1200, 600, 300, 50 Baud
• #6335: 'Advanced Information' window should be renamed to 'General Information'
• #6357: Regex returns 0 for notations with a space between +/- sign and the actuall number
• #6401: Configurable Amplifier should have wait options after sending power on (for warming-up) and off (for cooling down)
• #6408: Amplifier Slope verification for Conducted Immunity
• #6455: Warnings related to wxEXPAND are shown when a wxWidgets dialog is shown

RadiMation version 2015.3.0

• #5999: Mark the 'Continuous Measure' button in a different color when it is activated
• #6295: When note window is opened the focus or cursor is not set to the text field by default
• #6368: Duplicating more than 100 tests in a sequence takes a long time
• #6369: Duplicating a test in a sequence file, doesn't mark the sequence file as changed
• #6370: Radio buttons of Conducted Emission Manual Mode traces are swapped
• #6387: It is not possible to select multiple peaks and therefore needs to select peaks one by one
• #6388: Adding new peaks is resetting the peak lists selected column information