Release Notes/Solved items Version 2018.1.4

RadiMation version 2018.1.4

• #5261: Frequency plot can't be printed
• #5636: R&S ESPI 3 error Data out of range SCAN1:BAND:RES
• #5783: R&S ESU 26: Error -222: Data out of range. Depending on the preamplifier that is used
• #6373: R&S ESU 40: Error -222: Data out of range SCAN1:BAND:RES 1 KHZ
• #6811: Add new RadiMation startup Reseller logo
• #7329: Using multiple bands that switch preamplifier on and off gives error: R&S Receiver ESU 8
• #7482: RBW and SpanCentreFrequency order. Unable to set frequency multiband
• #7728: Unicode: clsFile EUT information is saved as ascii. Unicode characters are saved and read as '???'
• #8590: Unknown error when Visa is not installed, and is tried to control the EMCenter by LAN
• #8600: Spectrum Analyser frequency out of range with PreAmplifier MB
• #8691: Frequency out of range at second measurement.
• #8730: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
• #8734: controlling radigen over windows rs232 to com3 over usb is not working
• #9129: RadiMation crash when GPIB-Board is not installed or not configured correctly (GPIB-EDVR)
• #9177: Unable to open measurement files (_Object reference not set to an instance of an object..)
• #9188: Corrupt testfile, no data is visible in the graph
• #9221: Receiver (ID1691) Input 2: Specific System Error: -222,"Data out of range; SCAN1:BAND:RES 1 KHZ"
• #9247: Wrong output for Keyword ||DESCRIPTION||
• #9274: Driver: Field probe Narda EMC-30 RS232
• #9275: Driver: Passive drivers Philips Saeco S.p.A.
• #9277: Driver: Passive drivers CDVI Wireless S.p.A.
• #9278: MB test with Carad as eut controller gives an error
• #9287: Test data disappeared
• #9293: Radimation restarts during emission measurements (read/write outside the bounds of array)
• #9310: Testdata again not visible
• #9311: Test data lost / not visible
• #9314: No response turn table
• #9335: VI Window crash at closing
• #9338: Driver: Shaffner Broadband Horn Antenna 1-18 GHZ
• #9339: Driver: Stanford Research Systems - Model DS335
• #9341: Driver: Agilent N1913A
• #9345: De index ligt buiten de matrixgrenzen - Index out of range
• #9350: Signal power went too high (-6 dBm) during power delivery test
• #9363: Driver: CDN LAPLACE S46 ST8
• #9364: Driver: LISN LAPLACE (Cranage) LISN16A1P
• #9365: Driver: Antenna Laplace SA1020/RF200 No remote control
• #9366: Driver: Injection device Teseq KEMZ 801
• #9367: Driver: Calibration JIG Teseq KEMZ 801
• #9368: Driver: CDN MEB M3, M2, AF3-1 and AF2-1
• #9369: Driver: Antenna ARA LPB-2513
• #9382: Unable to ReportGenerate Emission and Peak Table
• #9394: Index was outside the bounds of the array.
• #9396: Index was outside the bounds
• #9398: Driver: Bonn BLMA 2060-30
• #9409: R&S ESI does not show graph of logarithmic stepped sweep
• #9426: Subject of ErrorReport should contain the description of the error
• #9428: Transmitting an ErrorReport is not working, complains that it is not possible to send ErrorReport
• #9440: Word locks documents after that it is not possible to print
• #9443: ErrorReport: "De bronmatrix is niet lang genoeg. Controleer srcIndex en de lengte ervan, en de ondergrenzen van de matrix. ".
• #9521: Peak table does not work in 2018 version
• #9524: Object reference not set to an instance of an object: clsCommandSetTurnTableAngle.IManualModeAsyncCommand_StartWork(
• #9525: Antenna Tower (ID1365) Aut.: Impossible to get description string for this Error! Probably an unknown RadiMation Error. Code: 805308669 (0x300008FD))
• #9538: Version Information is not displaying
• #9539: Text does not display on the devices tab in 2018.1.4
• #9549: Problem exporting conducted emission
• #9558: ErrorReport: "Access to the path 'C:\Users\u0058578a\Documents\My Music' is denied. "
• #9577: DARERSS2010I
• #9584: Question: What is AT. Is this used for low frequent rod or loop antenna?
• #9593: Vertical stripes QP measurements
• #9608: Unhandled exceptions